Geochemical study on oil-cracked gases and kerogen-cracked gases (II)—Discrimination methods between oil-cracked gases and kerogen-cracked gases

In the processes of discrimination between oil-cracked gases and kerogen-cracked gases, Behar and Pinzgofer et al.’s results were adopted in the former researches, in which the ratio of C₂/C₃ is basically a constant while the ratio of C₁/C₂ gradually increases in the course of primary cracking of kerogen. Otherwise in the course of secondary cracking of oil, the ratio of C₂/C₃ increases rapidly while C₁/C₂ keeps relatively stable. Our study on analogue experiment shows that, whether it is oil or kerogen, in its process of gas generating by cracking, the ratios of C₂/C₃, C₁/C₂ or C₁/C₃ will all be increased with the growth of thermal conditions. In comparison, the ratio of C₂/C₃, which is affected by genetic type to some comparatively less extent, mainly responds to the maturity of gases, while the value of C₂/C₃ is about 2, and that of C₂/iC₄ is about 10, and the corresponding value of R _o is about 1.5%–1.6%. The influence of gas source on C₂/C₃ is less than that of gas maturity, otherwise C₁/C₂ (or C₁/C₃) is obviously affected by cracking matrices. The ratios of C₁/C₂, C₁/C₃ of oil-cracked gases are less than that of kerogen-cracked gases, under the condition that the ratios of C₂/C₃ are similar in value, so are the value of dryness indexes. There exists wide diffidence between this view and the former discrimination method in theory. The analysis of the spot sample indicates that we can apply the above basic view to dealing efficiently with the problem of the discrimination between oil-cracked gas and kerogen-cracked gas.

     

Experimental study and constitutive modelling of elasto‐plastic damage in heat‐treated mortar

This study investigates the effect of a heat‐treatment upon the thermo‐mechanical behaviour of a model cement‐based material, i.e. a normalized mortar, with a (w/c) ratio of 0.5. First, a whole set of varied experimental results is provided, in order to either identify or validate a thermo‐mechanical constitutive model, presented in the second paper part. Experimental responses of both hydraulic and mechanical behaviour are given after different heating/cooling cycling levels (105, 200, 300, 400^°C). The reference state, used for comparison purposes, is taken after mass stabilization at 60^°C. Typical uniaxial compression tests are provided, and original triaxial deviatoric compressive test responses are also given. Hydraulic behaviour is identified simultaneously to triaxial deviatoric compressive loading through gas permeability K_gas assessment. K_gas is well correlated with volumetric strain evolution: gas permeability increases hugely when ε_v testifies of a dilatant material behaviour, instead of contractile from the test start. Finally, the thermo‐mechanical model, based on a thermodynamics approach, is identified using the experimental results on uniaxial and triaxial deviatoric compression. It is also positively validated at residual state for triaxial deviatoric compression, but also by using a different stress path in lateral extension, which is at the origin of noticeable plasticity. Copyright © 2009 John Wiley & Sons, Ltd.     

Wave Height Estimation from SAR Imagery

This paper presents a method developed for estimating wave height from synthetic aperture radar (SAR) imagery without prior assumption of noise distribution. It is based on two-dimenslonal ocean wave spectra retrieved from fully calibrated SAR images. Wen‘s spectrum was used as first-guess wave spectrum in the retrieval process. Comparison of the estimated wave height obtained by this method from two ERS-1 SAR subimages dated 23 July 1994 with in-situ measurements showed that the method works well.     

发光细菌法在环渤海污水样品遗传毒性检测中的应用

建立了以经过遗传改造的发光细菌Acinetobacter sp.Rec A为受试物种的环境污染物遗传毒性快速检测方法,该方法最快可在3h内得到毒性评价结果。采用该方法评价了环渤海排污口12份污水样品的遗传毒性。环渤海12个排污口的污水样品均表现出了不同水平的遗传毒性,并呈现出一定的分布特征。其中,高毒水质集中出现在山东半岛污水样品中,中毒水质集中出现在辽东半岛地区,而低毒水质主要集中于京津冀地区。综上,在环渤海的污水样品遗传毒性检测中,这种新型发光细菌法具有快速、灵敏、简便等优点,可为以后近海环境的水质生物毒性检测提供参考依据,具有应用于近海环境水质快速监测与评价的潜力。     

西北冰洋楚科奇海台08P31孔晚第四纪的古海洋学记录

本文通过中国第三次北极科学考察在北冰洋楚科奇海台采集的08P31孔样品的多项指标分析,重建该区晚第四纪的古海洋与古气候演变历史。将08P31孔沉积物记录与其他孔综合对比初步划分为氧同位素3期(MIS 3)-MIS 1的沉积序列;TOC与Opal含量分析结果显示,自MIS 3以来该区总生产力呈逐渐上升趋势,但硅质生产力不高;CaCO3含量不仅代表海生钙质生物的生产力,也是陆源碎屑碳酸盐岩的信号;根据δ13Corg值运用两端元法计算出TOCmar/TOC,并通过TOCmar、TOCter与C/N值比较可知,δ13Corg值作为有机质来源的指标更可靠。经分析该孔沉积物有机质以海源有机质为主,但褐色层B2与白色层W3的有机质主要受到陆源有机质输入的影响;该孔沉积物中的浮游有孔虫Neogloboquadrina pachyderma(sin.)(Nps)的δ18 O和-δ13 C结果显示:褐色层B2和灰色层G1的轻值是由冰融水造成;黄褐色层Yb1上部到白色层W3下部的轻值反映了海冰形成速率提高,导致轻同位素卤水的生产和下沉。黄褐色层Yb1中部及白色层W3,Nps-δ18 O和-δ13C的重值对应低的有孔虫丰度,指示水体温度下降以及低营养环境。黄褐色层Yb2的Nps-δ18 O和-δ13C值呈镜像关系,这是由于大冰期环境下,海盆内储存了较少的融冰水导致。     

南海北部自由生活海洋线虫的群落结构和生物多样性

A quantitative study on the community structure and biodiversity of free-living marine nematodes and their relationship with environmental factors in the northern South China Sea were carried out based...     

测量机器人的关键技术

本文提出了测量机器人概念,重点分析了测量机器人的组成框架及关键技术,聚焦定位与建图、场景感知、路径规划及多机协同等测量机器人前沿研究领域,综述了最新研究进展,并剖析了当前面临的技术难题,简述了测量机器人的发展机遇.     

月度亚米级卫星影像在"两违"监测中的应用

严厉打击违法用地和违法建设行为,能保护国土资源不受侵害、提升城市形象、维护社会公平和国家法律法规.利用卫星影像监测"两违"行为,具有覆盖范围广、监测频率高、成本低、受限制条件少等优势,随着卫星影像空间、时间分辨率的逐渐提高,使月度亚米级卫星影像在"两违"监测中的应用成为可能.研究利用月度亚米级卫星影像开展"两违"监测应用的方法,以北京市为例介绍了具体应用情况,并总结了技术关键点.利用高空间分辨率、高频次卫星影像可以有效提高"两违"监测的准确性和时效性,内业变化检测和外业核查相结合的方式可为"两违"执法提供更为客观准确的数据基础和决策依据.     

面向OBE的《海洋测绘》课程质量达成度评价方法构建及应用

构建合理课程质量评价体系是专业认证工作的一项重要内容,也是成果导向教育(Outcome Based Education,OBE)得以真正实施的基础保障.以江苏海洋大学国家一流专业测绘工程的《海洋测绘》课程为例,探讨了海洋测绘课程质量达成度综合评价方法,并结合实例进行应用分析.为课程质量达成度评价提供有效借鉴.     

督察区域地类图斑自动套合方法

自然资源督察工作中,为确定目标区域是否存在土地利用违法行为,需要利用ArcGIS软件对目标区域和地类图斑数据进行空间计算、汇总统计等套合工作,为督察工作实施提供数据支撑。目前,人工套合存在制作成本高、工作量大、准确性低、数据命名存储格式不一致等问题。为此,本文基于Python实现了地类图斑自动套合的方法,该方法可以自动完成目标区域与地类图斑的空间计算、字段计算、Excel导出,以及生成数据透视表等工作,极大地减小了技术人员的工作量,有效缩短了督察工作的数据准备时间,对提高自然资源督察工作的效率具有实践意义。