Miocene provenance change in Himalayan foreland basin and Bengal Fan sediments,with special reference to detrital garnet chemistry

Bengal Fan Miocene sediments were collected during International Ocean Discovery Program Expedition 354 and investigated using petrographic and detrital garnet chemistry analyses. The Miocene Siwalik Group, which is composed of sediments deposited in the Himalayan foreland basin, was also analyzed for comparison with the Bengal Fan data for the provenance change during the Miocene. Our petrographic analyses revealed that the Miocene sediments of the Bengal Fan and Siwalik Group consist predominantly of Higher Himalayan Crystalline (HHC)-derived detritus such as chloritoid, staurolite, sillimanite, and/or kyanite, which appear among the accessory minerals. The chemistry of the detrital garnet varies across the stratigraphy; most of the garnet is rich in almandine and poor in spessartine and pyrope. However, pyrope-rich garnet, which is considered to originate from the HHC core (granulite facies), was found in the lower to upper Miocene deposits. The deposition of HHC-derived detrital garnet began before the Middle Miocene (15 Ma) and before the Late Miocene (10–9 Ma) in the Siwalik Group. The Bengal Fan data, by contrast, indicated that pyrope-rich garnet appeared in the Early Miocene (17.3 Ma) and Late Miocene (8.5–6.5 Ma). We conclude that the Bengal Fan sediments record the erosion of the HHC zone since the Early Miocene that appears in the Siwalik sediments. Furthermore, we found that the HHC-derived inputs decreased from the late Middle Miocene (12 Ma) to the early Middle Miocene (10 Ma) in both the Nepal Himalaya foreland basin and the Bengal Fan. The disappearance of the HHC-derived detritus is probably the result of dilution by Lesser Himalayan detritus, which suggests that the Lesser Himalayan zone, which is composed of metamorphosed and unmetamorphosed sedimentary rocks, was uplifted.     

Estimation of groundwater residence time using the 36Cl bomb pulse

We propose a methodology for estimating the residence time of groundwater based on bomb-produced (36)Cl. Water samples were collected from 28 springs and 2 flowing wells located around Mt. Fuji, Central Japan. (36)Cl/Cl ratios in the water samples, determined by accelerator mass spectrometry (AMS), were between 43 × 10(-15) and 412 × 10(-15). A reference time series of the above-background (i.e., bomb-derived) (36)Cl concentration was constructed by linearly scaling the background-corrected Dye-3 data according to the estimated total bomb-produced (36)Cl fallout in the Mt. Fuji area. Assuming piston flow transport, estimates of residence time were obtained by comparing the measured bomb-derived (36)Cl concentrations in spring water with the reference curve. The distribution of (36)Cl-based residence times is basically consistent with that of tritium-based estimates calculated from data presented in previous studies, although the estimated residence times differ between the two tracers. This discrepancy may reflect chlorine recycling via vegetation or the relatively small change in fallout rate, approximately since 1975, which would give rise to large uncertainties in (36)Cl-based estimates of recharge for the period, approximately since 1975. Given the estimated ages for groundwater from flowing wells, dating based on a (36)Cl bomb pulse may be more reliable and sensitive for groundwater recharged before 1975, back as far as the mid-1950s.     

Density measurements of liquid Fe–Si alloys at high pressure using the sink–float method

The compositional dependence on the density of liquid Fe alloys under high pressure is important for estimating the amount of light elements in the Earth’s outer core. Here, we report on the density of liquid Fe–Si at 4 GPa and 1,923 K measured using the sink–float method and our investigation on the effect of the Si content on the density of the liquid. Our experiments show that the density of liquid Fe–Si decreases from 7.43 to 2.71 g/cm³ non-linearly with increasing Si content (0–100 at%). The molar volume of liquid Fe–Si calculated from the measured density gradually decreases in the compositional range 0–50 at% Si, and increases in the range 50–100 at% Si. It should be noted that the estimated molar volume of the alloys shows a negative volume of mixing between Fe and Si. This behaviour is similar to Fe–S liquid (Nishida et al. in Phys Chem Miner 35:417–423, 2008). However, the excess molar volume of mixing for the liquid Fe–Si is smaller than that of liquid Fe–S. The light element contents in the outer core estimated previously may be an underestimation if we take into account the possible negative value of the excess mixing volume of iron–light element alloys in the outer core.     

Sound velocities of Na0.4Mg0.6Al1.6Si0.4O4 NAL and CF phases to 73 GPa determined by Brillouin scattering method

The sound velocities of two aluminum-rich phases in the lower mantle, hexagonal new Al-rich phase (NAL) and its corresponding high-pressure polymorph orthorhombic Ca-ferrite-type phase (CF), were determined with the Brillouin scattering method in a pressure range from 9 to 73 GPa at room temperature. Both NAL and CF samples have identical chemical composition of Na_0.4Mg_0.6Al_1.6Si_0.4O₄ (40 % NaAlSiO₄–60 % MgAl₂O₄). Infrared laser annealing in the diamond anvil cell was performed to minimize the stress state of the sample and obtain the high-quality Brillouin spectra. The results show shear modulus at zero pressure G ₀ = 121.960 ± 0.087 GPa and its pressure derivative G’ = 1.961 ± 0.009 for the NAL phase, and G ₀ = 129.653 ± 0.059 GPa and G’ = 2.340 ± 0.004 for the CF phase. The zero-pressure shear velocities of the NAL and CF phases are obtained to be 5.601 ± 0.005 km/sec and 5.741 ± 0.001 km/sec, respectively. We also found that shear velocity increases by 2.5 % upon phase transition from NAL to CF at around 40 GPa.     

Cathodoluminescence microscopy and spectroscopy of forsterite from Kaba meteorite: An application to the study of hydrothermal alteration of parent body

Highly forsteritic olivine (Fo: 99.2–99.7) in the Kaba meteorite emits bright cathodoluminescence (CL). CL spectra of red luminescent forsterite grains have two broad emission bands at approximately 630 nm (impurity center of divalent Mn ions) in the red region and above 700 nm (trivalent Cr ions) in the red–IR region. The cores of the grains show CL blue luminescence giving a characteristic broad band emission at 400 nm, also associated with minor red emissions related to Mn and Cr ions. CL color variation of Kaba forsterite is attributed to structural defects. Electron probe microanalyzer (EPMA) analysis shows concentrations of Ca, Al, and Ti in the center of the forsterite grain. The migration of diffusible ions of Mn, Cr, and Fe to the rim of the Kaba meteoritic forsterite was controlled by the hydrothermal alteration at relatively low temperature (estimated at about 250 °C), while Ca and Al ions might still lie in the core. A very unusual phase of FeO (wüstite) was also observed, which may be a terrestrial alteration product of FeNi‐metal.     

Geochemical characteristics of deposits from the 2011 Tohoku‐oki tsunami at Hasunuma,Kujukuri coastal plain,Japan

We examined the geochemical characteristics and temporal changes of deposits associated with the 2011 Tohoku‐oki tsunami. Stable carbon isotope ratios, biomarkers, and water‐leachable ions were measured in a sandy tsunami deposit and associated soils sampled at Hasunuma, Kujukuri coastal plain, Japan, in 2011 and 2014. At this site, the 2011 tsunami formed a 10–30 cm ‐thick layer of very fine to medium sand. The tsunami deposit was organic‐poor, and no samples contained any detectable biomarkers of either terrigenous or marine origin. In the underlying soil, we identified hydrocarbons and sterols derived from terrestrial plants, but detected no biomarkers of marine origin. In the samples collected in 2011, concentrations of tsunami‐derived water‐leachable ions were highest in the soil immediately beneath the tsunami deposit and then decreased gradually with depth. Because of its finer texture and higher organic content, the soil has a higher water‐holding capacity than the sandy tsunami deposit. This distribution suggests that ions derived from the tsunami quickly penetrated the sand layer and became concentrated in the underlying soil. In the samples collected in 2014, concentrations of water‐leachable ions were very low in both soil and sand. We attribute the decrease in ion concentrations to post‐tsunami rainfall, seepage, and seasonal changes in groundwater level. Although water‐leachable ions derived from seawater were concentrated in the soil beneath the tsunami deposit following the tsunami inundation, they were not retained for more than a few years. To elucidate the behavior of geochemical characteristics associated with tsunamis, further research on organic‐rich muddy deposits (muddy tsunami deposits and soils beneath sandy tsunami deposits) as well as sandy tsunami deposits is required.     

Diverse mineralogical and oxygen isotopic signatures recorded in CV3 carbonaceous chondrites

We describe the petrography and mineralogy of six CV3 carbonaceous chondrites. LAP02206, LAP02228, LAP04843, and GRA06101 are classified as oxidized Allende-like chondrites (CV3_oxA). RBT04143 and QUE97186 are classified as members of the reduced subtype (CV3_red). Chondrules in the CV3_oxA chondrites show extensive Fe–Mg zoning. Fe-rich olivine in the rims of the CV3_oxA chondrules are ¹⁶O-poor relative to Mg-rich olivine in the cores, suggesting that in addition to Fe and Mg, oxygen was exchanged between chondrules and matrix during weak thermal metamorphism. The CV3_red chondrites appear to have formed through various processes. QUE97186 shows chondrule flattening with a preferred orientation, which is interpreted to have resulted from shock impact at a pressure of ～20 GPa. The post-shock residual heat (～1000 °C) is likely to be responsible for the restricted Fe/Mg ratios of matrix olivine. Based on the degree of Fe–Mg homogenization of matrix olivines, we estimate the spatial scale of the shock-heated region to be ～1 m. RBT04143 is a breccia containing many clasts of two types of lithologies: reduced-type material and very weakly altered material.     

Coupling fluvial processes and landslide distribution toward geomorphological hazard assessment: a case study in a transient landscape in Japan

This study quantified the relationship among deep-seated gravitational slope deformations (DGSDs), landslides, and river rejuvenation in the upper reaches of the Kumano River in the Kii Mountains of Japan, an area of frequent bedrock landslides. River profiles and hillslope landforms were examined, and high-resolution digital elevation models (DEMs) were used to identify DGSDs and landslides. Many of the deep-seated landslides were associated with rainstorms in 1889 and 2011. Landslide volumes were related to landslide areas on the basis of 52 deep-seated landslides that failed during the 2011 rainfall, providing basic data for landscape denudation and sediment yield. River rejuvenation occurred stepwise, incising moderate relief paleosurfaces and forming two series of knickpoints and V-shaped inner gorges that are up to 400-m deep. More than 65% of DGSDs and 75% of the landslides were located in association with the incised inner gorges along the peripheries of the paleosurfaces or were entirely contained within the inner gorges. DGSDs and landslides associated with the incised inner valley slopes tended to be larger than those developed within the paleosurfaces and may be long-term transient hillslope responses to river incision. Hillslope undercutting caused by rejuvenated river incision may play an important role in long-term slope stability and distribution of mass movements, and could serve as an indicator of landslide hazard.     

Extreme aridity prior to lake expansion deciphered from facies evolution in the Miocene Ili Basin,south‐east Kazakhstan

Central Asia witnessed progressive aridification during the Miocene, commonly related to mountain uplift, the Paratethys retreat and global climate cooling. However, the formation of Miocene lakes in Central Asia seems to oppose drier conditions, suggesting that the precise timing, extent and forcing of the aridification is still not well constrained. This study presents a facies model for the alluvial–lacustrine part of the Middle to Late Miocene of the Ili Basin, obtained from two successions. The model enables the semi‐quantitative assessment of regional water level and salinity, and characterizes the control of water level on evaporite formation and diagenesis. Both the proximal Kendyrlisai and the distal Aktau successions show an overall increase in water availability from dry mudflat deposits to lacustrine sedimentation with a transitional playa phase. Increasing evaporation rates outpaced the water supply and caused groundwater salinization. Subsequent lake expansion coincided with a basin‐wide desalinization and required a shift to a positive water budget. A climatic control of the hydrological evolution is inferred due to abrupt salinization and a minor tectonic influence. The long‐term water accumulation is probably related to the hydrological closure of the basin in the early Middle Miocene (15·3 Ma). Starting at 14·3 Ma, the step‐wise salinization occurred simultaneously with the global cooling of the Miocene Climate Transition. The Miocene Climate Transition led to extreme aridity in the Ili Basin, highlighted by the early diagenetic formation of displacive anhydrite in the basin centre. The expansion of the freshwater lake (12·7 to 11·5 Ma) was possibly promoted by lower evaporation rates due to decreasing air temperatures in the Ili Basin after the Miocene Climate Transition. The extreme aridity in the Ili Basin is interpreted as a continental counterpart to the Badenian Salinity Crisis in the Central Paratethys. This emphasizes the role of atmospheric forcing on evaporite sedimentation across Eurasia during the Middle Miocene.