临汾"8.26"区域性大暴雨过程分析

利用micaps业务平台常规资料、数值预报产品、卫星云图，对临汾市2003年8月26日区域性暴雨和大暴雨的环流背景、影响系统、热带低压登陆副热带高压东退以及物理量条件进行了诊断分析，探讨了副热带高压进退及台风登陆位置在这次大暴雨过程中起到了非常重要的作用。分析结果在暴雨预报业务及暴雨研究中有一定的指示意义。     

晋中市人工防雹减灾系统研究

利用雷达探测信息、地面气象观测资料和高空探测资料 ,通过计算机分析处理 ,对冰雹天气的发生、发展进行分析预报 ,并计算多单体任意雹云核心部位的覆盖面积 ,对不同地理位置的各炮点 ,经过极坐标和三维直角坐标系的变换 ,确定雹云相对于不同空间位置的各炮点的准确位置 ,并对各炮点不同弹型的弹道方程进行连续模拟和分析计算 ,最终确定在炮控范围内的雹云体内弹着点的准确位置 ,并通过计算云中含水量、零度层高度、云体体积 ,准确得出各个炮点的射击诸元 (射击仰角、方位、扇面和射击剂量等 ) ,通过通讯网络 ,通知各有关炮点实施作业     

水位下降卸荷诱发库岸边坡快速失稳机理分析

本文以某工程现场岩质边坡为例，采用与传统裂隙水压力分布不同的水压力分布方式和边坡裂隙中可能发生的水锤效应相耦合，分析研究了岩质边坡发生滑动的机理及稳定性。研究表明，本文所采用的水压力分布方式较为符合边坡中的水压力分布实际情况，可以给出一个较为合理的稳定系数。当考虑水锤效应时，岩质边坡的稳定系数大大降低，说明水锤效应加剧了边坡破坏失稳的过程。本文所采用的水压力分布方式与边坡裂隙中的水锤效应相耦合的计算方法，在边坡稳定性分析中具有参考意义。     

元谋干热河谷坡耕地土壤侵蚀造成的土地退化

在元谋干热河谷土壤侵蚀特征分析的基础上，对坡耕地土壤侵蚀造成的土地退化进行了模拟研究。结果表明，土壤侵蚀造成表层耕作土壤的物理性能下降、养分流失和水分入渗能力降低。表层耕作土壤的容重比下层土壤低12．7％，总孔隙度高10．9％，有机质高37．3％，120min累计入渗总量是下层土壤的1．6-2．2倍。模拟土壤侵蚀与土地生产力关系的小区试验结果显示，坡耕地每流失1cm表土，土地生产力水平平均下降4．54％。     

工业测量数据的可视化方法研究

简要介绍了测量获取离散点数据的一般手段，阐述了3维曲面重建的NURBS方法和空间Delauany三角剖分方法，简要说明了使用OpenGL进行3维开发的机制，并给出了3维空间交互和查询的实现步骤。为有效地发掘测量数据潜在的信息和规律提供了一条新的途径。     

季节指数及其在季节性监测资料分析和预报中的应用

基于灰色模型的诸多优点，作者选用GM(1，1)模型分析和预报形变监测序列。然而直接应用GM(1，1)灰色模型分析和预报具有季节性的监测序列时往往精度不高。因此，作者提出运用基于季节指数的“去季节波动”法与GM(1，1)混合建模，对监测资料进行分析与预报。基于均方差和平均绝对误差两个精度准则，作者对此方法与周期函数拟合模型进行了比较。结果表明，此方法提高了具有季节性波动监测序列的预报精度，且建模方法简便、快捷。     

西风带研究动态

本文较为详细地介绍了影响我国气候的重要因子——西风带的一些国内外最新研究动态,这些研究动态和研究成果将对山西省的气候研究起到积极作用。     

陕西省信用联社市县级计算机网络防雷工程设计分析

“山西省卫星农网”依托其省、市、县三级专门服务于农业的信息交流平台,能够及时地让农户了解国家和地方的农业政策及办事程序等,成为农户和政府间的信息桥梁,为广大农村提供准确的各类气象信息,有效地指导了农业生产,大大地减小了天气灾害损失。山西卫星农网作为山西省规模较大的农业专业网站,其影响和作用正逐步地发挥出来。     

Gas accumulation from oil cracking in the eastern Tarim Basin: A case study of the YN2 gas field

Oil and gas exploration in eastern Tarim Basin, NW China has been successful in recent years, with several commercial gas accumulations being discovered in a thermally mature to over-mature region. The Yingnan2 (YN2) gas field, situated in the Yingnan structure of the Yingjisu Depression, produces gases that are relatively enriched in nitrogen and C₂₊ alkanes. The δ¹³C₁ (−38.6‰ to −36.2‰) and δ¹³C₂ values (−30.9‰ to −34.7‰) of these gases are characteristic of marine sourced gases with relatively high maturity levels. The distributions of biomarkers in the associated condensates suggest close affinities with the Cambrian–Lower Ordovician source rocks which, in the Yingjisu Sag, are currently over-mature (with 3–4%Ro). Burial and thermal maturity modeling results indicate that paleo-temperatures of the Cambrian–Lower Ordovician source rocks had increased from 90 to 210 °C during the late Caledonian orogeny (458–438 Ma), due to rapid subsidence and sediment loading. By the end of Ordovician, hydrocarbon potential in these source rocks had been largely exhausted. The homogenization temperatures of hydrocarbon fluid inclusions identified from the Jurassic reservoirs of the YN2 gas field suggest a hydrocarbon emplacement time as recent as about 10 Ma, when the maturity levels of Middle–Lower Jurassic source rocks in the study area were too low (<0.7%Ro) to form a large quantity of oil and gas. The presence of abundant diamondoid hydrocarbons in the associated condensates and the relatively heavy isotopic values of the oils indicate that the gases were derived from thermal cracking of early-formed oils. Estimation from the stable carbon isotope ratios of gaseous alkanes suggests that the gases may have been formed at temperatures well above 190 °C. Thus, the oil and gas accumulation history in the study area can be reconstructed as follows: (1) during the late Caledonian orogeny, the Cambrian–Lower Ordovician marine source rocks had gone through the peak oil, wet gas and dry gas generation stages, with the generated oil and gas migrating upwards along faults and fractures to form early oil and gas accumulations in the Middle–Upper Ordovician and Silurian sandstone reservoirs; (2) since the late Yanshanian orogeny, the early oil accumulations have been buried deeper and oil has undergone thermal cracking to form gas; (3) during the late Himalayan orogeny, the seals for the deep reservoirs were breached; and the gas and condensates migrated upward and eventually accumulating in the relatively shallow Jurassic reservoirs.     

Mineralogy and geochemistry of a Late Permian coal in the Dafang Coalfield, Guizhou, China: influence from siliceous and iron-rich calcic hydrothermal fluids

This paper describes the influence of siliceous and iron-rich calcic low-temperature hydrothermal fluids (LTHF) on the mineralogy and geochemistry of the Late Permian No. 11 Coal (anthracitic, R_r=2.85%) in the Dafang Coalfield in northwestern Guizhou Province, China. The No. 11 Coal has high contents of vein ankerite (10.2 vol.%) and vein quartz (11.4 vol.%), with formation temperatures of 85 and 180 °C, respectively, indicating that vein ankerite and vein quartz were derived from low-temperature calcic and siliceous hydrothermal fluids in two epigenetic episodes. The vein quartz appears to have formed earlier than vein ankerite did, and at least three distinct stages of ankerite formation with different Ca/Sr and Fe/Mn ratios were observed.The two types of mineral veins are sources of different suites of major and trace metals. Scanning electron microscope and sequential extraction studies show that, in addition to Fe, Mg, and Ca, vein ankerite is the dominant source of Mn, Cu, Ni, Pb, and Zn in the coal, and the contents of these five elements are as high as 0.09% and 74.0, 33.6, 185, and 289 μg/g, respectively. In contrast, vein quartz is the main carrier mineral for platinum-group elements (PGEs) Pd, Pt, and Ir in the coal, and the contents of Pd, Pt, and Ir are 1.57, 0.15, and 0.007 μg/g, respectively. Sequential extraction showed a high PGE content in the silicate fraction, up to 10.4 μg/g Pd, 1.23 μg/g Pt, and 0.05 μg/g Ir, respectively. It is concluded that the formation of ankerite and quartz and the anomalous enrichment of trace elements in the No. 11 Coal in the Dafang Coalfield, Guizhou, result from the influx of calcic and siliceous low-temperature hydrothermal fluids.