西北地区太阳辐射量变化的研究

根据西北地区１５个日射甲种站观测的近３０年来到达地面的太阳辐射量观测资料，经方差分析表明：太阳散射辐射量有２／５的地区在增加，２／５的地区在减少，还有１／５的地区太阳散射、直接辐射量在时间变化上差异都不明显；太阳直接辐射量有４／５的地区在显著减减少；太阳总辐射量几乎各地都在减少，这种减少趋势大致从１９７８年开始，并且用太阳辐射倾向率的形式概括出３种太阳辐射量季节变化类型。     

我国太阳辐射量区域性变化特征研究*

对我国近35年来到达地面的太阳辐射量观测资料进行方差分析和统计检验,结果表明:从70年代开始,我国太阳直接辐射和总辐射量普遍减少,变化趋势分别为-246MJ/m2·10a和-16.8MJ/m2·10a,减少量最大中心在长江流域。太阳散射辐射量在东北、华北以及南方地区增加,在长江流域和西北地区减少。此外,用太阳辐射量倾向率的形式归纳出我国四种典型的区域性太阳辐射量季节变化特征。     

GRIB2介绍及解码初探

由于气象数据种类不断增多,对数量和质量的要求越来越高,而字符编码的局限性使得字符编码不能很好地满足这样的需求。WMO建议逐渐由字符编码向表格驱动码过渡。该文介绍了表格驱动码中的一种,即二进制格点加工数据(GRIB码)。首先介绍GRIB码的第1个版本(GRIB1)的编码格式,使用的模板技术及GRIB1目前在使用过程中的一些缺陷。然后着重分析了GRIB码的第2个版本(GRIB2)新的编码格式和特点,以及GRIB2在表示丰富的数据方面的优越性,最后对GRIB2解码过程中需要注意的一些问题进行了阐述。     

顾及地球引力摄动的卫星和卫星星下点位置计算

本文叙述了顾及地球引力摄动的卫星化置计算方法；利用天球坐标系与地球坐标系之间的坐标变换关系，给出了由卫星位置计算卫星星下点位置的严密计算公式。     

应用深层平板载荷试验选择桩端持力层

深层平板载荷试验是一种新兴的原位测试方法。通过安阳某工程人工挖孔扩底灌注桩深层平板载荷试验的现场实践,确定了不同土层地基土的承载力特征值,为设计单位选择持力层提供数据,并为甲方节省了大量建设资金。     

MOPITT观测的CO分布规律及与瓦里关地面观测结果的比较

利用TERRA/MOPITT仪器测量的2000年3月—2004年5月的CO数据,分析了CO的时空分布特征及其变化趋势,并且与美国国家海洋大气管理局气候监测与诊断实验室(CMDL/NOAA)在瓦里关站的CO观测结果进行比较和验证。结果表明:CO的高值区在北半球主要位于东亚、西欧和北美,而在南半球主要位于非洲中西部和南美洲的赤道地区;CO的分布随季节变化显著,春季北半球的CO浓度最高,而秋季南半球的CO浓度偏高;东亚的CO高值区主要是位于中国东部沿海地区和日本列岛一带。对于北京和瓦里关CO的趋势分析明表:这两个地区的CO浓度在这4年内都是呈上升趋势。结合CMDL的观测资料与卫星观测结果进行比较和检验发现,瓦里关站卫星观测结果和CMDL的结果在时间序列的变化趋势一致,卫星柱总量的观测数据和CMDL数据的相关性非常好。     

Geochronology and geochemistry of Yanchangbeishan biotite Adamellite of Lenghu area in Qinghai and their geological significanceEI北大核心CSCD

The Yanchangbeishan biotite adamellite in the Lenghu area of Qinghai is located in the west segment of the north margin of Qaidam. The rocks have high SiO2 (73.92%-75.98%) and K2O contents (3.71%-4.78%), but low MgO and CaO contents. The alumina saturation index (A/CNK) varies from 1.03 to 1.11, indicating the biotite adamellite is peraluminous. The chondrite-normalized REE patterns of the rocks are right dipping and display weak Eu anomalies. The rock contains the Al-rich mineral like garnet and possesses normative corundum contents of 1%. It has low Th and Y contents which are negatively correlated with Rb, suggesting the source rock was sedimentary rock. Thus, the biotite adamellite belongs to S-type granite. The granite was produced by partial melting of the crust material due to the underplating of mantle-derived magma. LA-ICP-MS zircon U-Pb dating shows that the formation age of the rock is 254±4 Ma. Based on the regional geological background and the geochemical characteristics of the rocks, we consider that the formation of the Yanchangbeishan biotite adamellite was related to subduction, which is illustrated by the characteristics similar to those of the island-arc igneous rocks. Therefore, the results reveal that the north margin of Qaidam was in active continental margin tectonic environment during Late Permian epoch. ©, 2015, Science Press. All right reserved.     

点蚀损伤下桩基式平台腿柱轴压极限承载力研究

采用圆柱体点蚀损伤模型,建立含细观尺度点蚀损伤的桩基式平台腿柱多尺度精细化数值模型,研究壁厚损伤度、点蚀损伤强度以及点蚀体积损伤强度影响平台腿柱轴压极限承载力的规律。研究结果表明,壁厚损伤度及点蚀损伤强度明显削弱平台腿柱的极限强度,且随点蚀损伤强度增大壁厚损伤度的影响加剧;点蚀体积损伤强度由于综合考虑了壁厚损伤度和点蚀损伤强度的耦合因素,相比于独立考虑后两者,其更能合理地描述点蚀损伤对平台腿柱极限强度的影响,故点蚀体积损伤强度体现了点蚀损伤的关键特征。本方法不仅适用于研究点蚀损伤构件的极限承载力,其所提出的点蚀损伤模型的构建方法,可拓展于研究受点蚀损伤的整体平台结构的极限承载力,且确定点蚀体积损伤强度为描述点蚀损伤特征的关键参数后,有望将其用于修正点蚀损伤平台腿柱的承载力设计公式。     

空间加权的孤立森林高光谱影像异常目标检测

针对孤立森林算法在高光谱影像异常目标检测中易产生大量虚警的问题,该文将异常目标在空间分布的稀缺性与 目标光谱的差异性两个先验结合,提出了一种空间加权的孤立森林异常目标检测方法.首先利用孤立森林算法计算目标的光谱异常度,得到初步的检测结果;然后分析初步结果中目标区域的连通面积,以连通域面积为变量,基于高斯核计算目标的空间稀缺性,得到目标的空间权重属性;最后将表达空间稀缺性的属性与光谱异常度加权相乘,实现了对异常目标的准确检测.在五组高光谱数据集上的实验结果表明,该方法具有较好的检测性能.     

An experimental study of effect of pre‐existing fabric on deformation of foliated mylonite at high temperature and pressure

We performed deformation experiments on a foliated mylonite under high temperature and pressure conditions in this study. To investigate the effect of pre‐existing fabric on the rheology of rocks, our samples were drilled from natural mylonite with the cylinder axis parallel to the foliation (PAR) and perpendicular to the foliation (PER). We performed 25 tests on seven PAR samples and 21 tests on seven PER samples at temperatures ranging from 600 to 890 °C, confining pressures ranging from 800 to 1400 MPa, and steady‐state strain rates of 1 × 10⁻⁴, 1 × 10⁻⁵ and 2.5 × 10⁻⁶ s⁻¹. In the temperatures of 600–700 °C, the deformation is accommodated by semi‐brittle flow, with the average stress exponent being 6–7 assuming power law flow; in the temperature range of 800–890 °C, deformation is mainly by plastic flow, with an average stress exponent of n = 3 and activation energies of Q = 354 ± 52 kJ/mol (PER and PAR samples). The experimental results show that the strengths of PER samples are higher than those of PAR samples. Deformation microstructures have been studied by optical and electron microscopy. The original foliation of PER samples is destroyed by deformation and replaced by a new foliation, but the deformation of PAR samples followed the original foliation. Electron backscatter diffraction (EBSD) measurements show a strong lattice preferred orientation (LPO) of the quartz c axis fabrics of the starting samples and deformed PER and PAR samples. However, the c axis fabric of quartz in experimentally deformed PER and PAR samples varied with temperature and strain rate is different from that seen in the starting mylonite sample. The initial quartz c axis fabric of the starting mylonite sample has been transformed into a new fabric during experimental deformation. Dehydration melting of biotite and hornblende occurred in both PER and PAR samples at temperatures of 800–890 °C. Copyright © 2014 John Wiley & Sons, Ltd.