点蚀损伤下桩基式平台腿柱轴压极限承载力研究

采用圆柱体点蚀损伤模型,建立含细观尺度点蚀损伤的桩基式平台腿柱多尺度精细化数值模型,研究壁厚损伤度、点蚀损伤强度以及点蚀体积损伤强度影响平台腿柱轴压极限承载力的规律。研究结果表明,壁厚损伤度及点蚀损伤强度明显削弱平台腿柱的极限强度,且随点蚀损伤强度增大壁厚损伤度的影响加剧;点蚀体积损伤强度由于综合考虑了壁厚损伤度和点蚀损伤强度的耦合因素,相比于独立考虑后两者,其更能合理地描述点蚀损伤对平台腿柱极限强度的影响,故点蚀体积损伤强度体现了点蚀损伤的关键特征。本方法不仅适用于研究点蚀损伤构件的极限承载力,其所提出的点蚀损伤模型的构建方法,可拓展于研究受点蚀损伤的整体平台结构的极限承载力,且确定点蚀体积损伤强度为描述点蚀损伤特征的关键参数后,有望将其用于修正点蚀损伤平台腿柱的承载力设计公式。     

An experimental study on major element release from the sediments in the Changjiang (Yangtze River) Estuary

With the enhanced warming and acidification of global ocean, whether and to what extent the naturally-weathered fluvial sediment into the sea can release elements and thus influence the geochemical pro...     

2021年5月云南漾濞MS 6.4地震序列发震构造及破裂过程初探

北京时间2021年5月21日21时48分36秒,云南省大理州漾濞县发生M_S 6.4地震。利用云南数字地震台网2021年5月18日至8月22日的震相报告,采用双差地震定位法,对漾濞M_S 6.4地震序列进行重新定位。重新定位结果显示序列呈NW向优势分布,破裂长约20 km,宽约7 km,对重新定位结果进行误差分析,水平方向定位误差约为0.8 km,垂直方向定位误差约为1.0 km,定位结果具有较好的稳定性。依据震中分布的走向将序列划分为NW向的主断层与NNW向的分支断层,主断层存在较为明显的分段现象,分支断层呈雁列状分布。根据小震丛集性发生在大震断层面及其附近的原则,利用重新定位后的小震震源位置反演得到漾濞M_S 6.4序列主断层走向约320°,倾角约89°,深度范围3～13 km。根据拟合得到的断层在地表的投影位置,推测本次地震的发震断层为维西-乔后断裂西侧的草坪断裂。基于断层滑动量分布识别出3个凹凸体,结合序列时空演化特征,分析了漾濞M_S 6.4地震序列的破裂过程,结果显示断层中段的凹凸体发生初始破裂...     

空间加权的孤立森林高光谱影像异常目标检测

针对孤立森林算法在高光谱影像异常目标检测中易产生大量虚警的问题,该文将异常目标在空间分布的稀缺性与 目标光谱的差异性两个先验结合,提出了一种空间加权的孤立森林异常目标检测方法.首先利用孤立森林算法计算目标的光谱异常度,得到初步的检测结果;然后分析初步结果中目标区域的连通面积,以连通域面积为变量,基于高斯核计算目标的空间稀缺性,得到目标的空间权重属性;最后将表达空间稀缺性的属性与光谱异常度加权相乘,实现了对异常目标的准确检测.在五组高光谱数据集上的实验结果表明,该方法具有较好的检测性能.     

Critical conditions for natural gas charging and delineation of effective gas source rocks for tight sandstone reservoirs

Although it has been shown that the potential of tight‐sand gas resources is large, the research into the mechanisms of hydrocarbon charging of tight sandstone reservoirs has been relatively sparse. Researchers have found that there is a force balance during hydrocarbon charging, but discriminant models still have not been established. Based on the force balance conditions observed during gas migration from source rocks to tight sandstone reservoirs, a calculation formula was established. A formula for identifying effective source rocks was developed with the gas expulsion intensity as the discrimination parameter. The critical gas expulsion intensity under conditions of various burial depths, temperatures, and pressures can be obtained using the calculation formula. This method was applied in the Jurassic tight sandstone reservoirs of the eastern Kuqa Depression, Tarim Basin, and it was calculated that the critical expulsion intensity range from 6.05 × 10⁸ m³/km² to 10.07 × 10⁸ m³/km². The critical gas charging force first increases with depth and later decreases with greater depths. The distribution range of effective gas source rocks and total expelled gas volume can be determined based on this threshold. This method provides new insight into and method for predicting favourable tight‐sand gas‐bearing regions and estimating their resource potentials. Copyright © 2014 John Wiley & Sons, Ltd.     

An experimental study of effect of pre‐existing fabric on deformation of foliated mylonite at high temperature and pressure

We performed deformation experiments on a foliated mylonite under high temperature and pressure conditions in this study. To investigate the effect of pre‐existing fabric on the rheology of rocks, our samples were drilled from natural mylonite with the cylinder axis parallel to the foliation (PAR) and perpendicular to the foliation (PER). We performed 25 tests on seven PAR samples and 21 tests on seven PER samples at temperatures ranging from 600 to 890 °C, confining pressures ranging from 800 to 1400 MPa, and steady‐state strain rates of 1 × 10⁻⁴, 1 × 10⁻⁵ and 2.5 × 10⁻⁶ s⁻¹. In the temperatures of 600–700 °C, the deformation is accommodated by semi‐brittle flow, with the average stress exponent being 6–7 assuming power law flow; in the temperature range of 800–890 °C, deformation is mainly by plastic flow, with an average stress exponent of n = 3 and activation energies of Q = 354 ± 52 kJ/mol (PER and PAR samples). The experimental results show that the strengths of PER samples are higher than those of PAR samples. Deformation microstructures have been studied by optical and electron microscopy. The original foliation of PER samples is destroyed by deformation and replaced by a new foliation, but the deformation of PAR samples followed the original foliation. Electron backscatter diffraction (EBSD) measurements show a strong lattice preferred orientation (LPO) of the quartz c axis fabrics of the starting samples and deformed PER and PAR samples. However, the c axis fabric of quartz in experimentally deformed PER and PAR samples varied with temperature and strain rate is different from that seen in the starting mylonite sample. The initial quartz c axis fabric of the starting mylonite sample has been transformed into a new fabric during experimental deformation. Dehydration melting of biotite and hornblende occurred in both PER and PAR samples at temperatures of 800–890 °C. Copyright © 2014 John Wiley & Sons, Ltd.     

Hydrocarbon generation and expulsion characteristics of Lower Permian P1f source rocks in the Fengcheng area,northwest margin,Junggar Basin,NW China: implications for tight oil accumulation potential assessment

Combined with the actual geological settings, tight oil is the oil that occurs in shale or tight reservoirs, which has permeability less than 1 mD and is interbedded with or close to shale, including tight dolomitic oil and shale oil. The Fengcheng area (FA), at the northwest margin of the Junggar Basin, northwest China, has made significant progress in the tight oil exploration of the Fengcheng (P₁f) Formation recently, which indicates that the tight oil resources have good exploration prospects. Whereas the lack of recognition of hydrocarbon generation and expulsion characteristics of Permian P₁f source rocks results in the misunderstanding of tight oil resource potential. Based on the comprehensive analysis of geological and geochemical characteristics of wells, seismic inversion, sedimentary facies, tectonic burial depth, etc., the characteristics of P₁f source rocks were investigated, and the horizontal distributions of the following aspects were predicted: the thickness of source rocks, abundance and type of organic matter. And on this basis, an improved hydrocarbon generation potential methodology together with basin simulation techniques was applied to unravel the petroleum generation and expulsion characteristics of P₁f source rocks in FA. Results show that the P₁f source rocks distribute widely (up to 2039 km²), are thick (up to 260 m), have high total organic content (TOC, ranging from 0.15 to 4 wt%), are dominated by type II kerogen and have entered into low mature–mature stage. The modeling results indicate that the source rocks reached hydrocarbon generation threshold and hydrocarbon expulsion threshold at 0.5% Ro and 0.85% Ro and the comprehensive hydrocarbon expulsion efficiency was about 46%. The amount of generation and expulsion from the P₁f source rocks was 31.85 × 10⁸ and 15.31 × 10⁸ t, respectively, with a residual amount of 16.54 × 10⁸ t within the source rocks. Volumetrically, the geological resource of shale oil is up to 15.65 × 10⁸ t. Small differences between the amounts calculated by the volumetric method compared with that by hydrocarbon generation potential methodology may be due to other oil accumulations present within interbedded sands associated with the oil shales. Copyright © 2015 John Wiley & Sons, Ltd.     

2011年江苏南部两场大暴雨对比分析

利用高分辨率的加密气象自动站资料、FY2D卫星资料、多普勒雷达资料、常规观测资料以及6 h 1次的NCEP再分析资料等,对2011年6月18日和2011年7月18日江苏地区分别发生在梅雨期开始阶段和结束阶段的两场暴雨进行中尺度天气系统演变和雷达回波参数等特征的对比分析。结果表明:(1)6月18日的天气形势是典型的梅雨期降水形势,在梅雨锋附近产生了区域性暴雨。水汽输送主要是对流层中低层的西南暖湿气流。7月18日的局地暴雨则是出现在低压倒槽顶端右侧的偏东气流中。(2)两次暴雨过程强降水发生前都存在对流层低层辐合快速增强的过程。7月18日暴雨强降水发生前散度值下降则更为迅速。(3)两次暴雨过程中强降水区都出现在地面辐合系统附近的东北气流中,且随着地面辐合系统移动。(4)两次暴雨过程都出现了T_BB低于-62℃的强对流云团。(5)6月18日,与多个线性排列的"逆风区"对应的强回波中心形成了"列车效应";7月18日,对流回波带上单体不断流入,在低空急流左前端合并成团状强对流区,分别是形成两次暴雨的重要原因。     

新型GPS探空仪与业务GTS1 2探空仪对比分析

2012年8月,中国气象局气象探测中心在广东阳江开展自动探空系统新型GPS探空仪比对试验,对比分析其技术改进后的准确性,试验结果表明：温度测量性明显优于GTS1 2型探空仪。湿度测量结果与RS92型探空仪一致性较好,系统误差在15%RH内,标准偏差在12%RH内。气压系统误差全量程在±10 hPa内,标准偏差在08 hPa内。位势高度系统误差在±20 gpm以内,标准偏差在70 gpm内。GPS定位测风性能优于GTS1 2型探空仪配合L波段二次测风雷达测风性能结果。     

利用树轮宽度重建黄河源区1618—2009年5—6月最高气温

利用采集自青海省雪山乡的祁连圆柏建立树轮宽度标准年表,将标准年表与黄河源区内4个气象站各气象要素作相关分析,结果显示整个源区5—6月最高气温与标准年表相关性最显著,相关系数为-0.65。根据相关分析结果,重建了黄河源区1618—2009年5—6月最高气温距平序列,重建方程经过逐一剔除检验,方差解释量达42.2%,具有一定的可靠性。重建序列在近400年间先后经历了8个较暖时间段和8个较冷时间段,暖期时段有1644—1656、1727—1746、1786—1797、1817—1835、1860—1885、1916—1934、1952—1968和1992—2005年,冷期的时段分别为1632—1643、1657—1696、1747—1764、1798—1816、1836—1859、1898—1915、1935—1951和1969—1991年。对比本次重建序列与杂多、青藏高原东部以及长江源的气温重建序列,发现以上序列在公共时段变化趋势一致,另外,一些文献和历史记载也证实了此次重建的可靠性。