电性源时域地空电磁数据小波去噪方法研究

基于飞艇的时间域地空电磁探测系统,具有勘探深度大、效率高、空间分辨率高、飞行控制容易等优势.但在低空飞行测量过程中,飞艇飞行高度、航迹、姿态等受风向、大气气流、地形、地面局部温度场变化等影响而发生变化,导致固定在艇囊前端的接收线圈发生运动,切割大地磁场,产生了电磁噪声、运动噪声、基线漂移等,从而影响电磁数据的电阻率成像质量.因此,研究地空电磁信号中多种噪声的去除方法,对数据的反演解释非常重要.由于地空电磁信号中有效信号频带与部分噪声频带相重叠,使用传统滤波或消噪方法具有一定局限性.因此,本文提出一种综合小波去噪法:根据地空电磁信号的特点,采用sym8小波基;基于小波多分辨率分析原理,利用小波高尺度近似分量估计基线漂移,以校正电磁数据中的基线;基于小波阈值收缩原理,采用5层小波分解、极小极大阈值配合硬收缩函数的消噪方法,来压制数据中的其余噪声.最后,通过异常环模型的理论响应和实测数据进行算法的验证,结果表明这种综合消噪法对多种噪声均有很好的抑制作用,是一种实用有效的时间域地空电磁数据消噪方法.     

Earthquake response analyses of a full‐scale five‐story steel frame equipped with two types of dampers

The seismic performance tests of a full‐scale five‐story passively controlled steel building were conducted on the E‐Defense shaking table in Japan in March 2009. Before the tests, a blind prediction contest was held to allow researchers and practitioners from all over the world to construct analytical models and predict the dynamic responses of the steel frame specimen equipped with buckling‐restrained braces (BRBs) or viscous dampers (VDs). This paper presents the details of two refined prediction models made and results obtained before the tests. When the proposed analytical modeling techniques are adopted as in the two refined prediction models, the overall prediction accuracy is about 90%. Sensitivity studies conducted after the tests are also presented in this paper. The effects of varying each modeling feature on the response simulation accuracy have been investigated. The analytical results suggest that considering concrete full‐composite actions for beam members could improve prediction accuracy by about 20% against using the simplified bare steel beam model. Adopting refined BRB stiffness computed from incorporating finite‐element gusset stiffness only improves the overall prediction accuracy by 0.9%. Considering the BRB dynamic loading test results for analytical BRB strength reduces the error by 1.9%. For the VD frame, incorporating the brace and VD stiffness could improve the overall prediction accuracy by about 15%. Copyright © 2012 John Wiley & Sons, Ltd.     

Application of a multi‐temporal,LiDAR‐derived,digital terrain model in a landslide‐volume estimation

Sediments produced by landslides are crucial in the sediment yield of a catchment, debris flow forecasting, and related hazard assessment. On a regional scale, however, it is difficult and time consuming to measure the volumes of such sediment. This paper uses a LiDAR‐derived digital terrain model (DTM) taken in 2005 and 2010 (at 2 m resolution) to accurately obtain landslide‐induced sediment volumes that resulted from a single catastrophic typhoon event in a heavily forested mountainous area of Taiwan. The landslides induced by Typhoon Morakot are mapped by comparison of 25 cm resolution aerial photographs taken before and after the typhoon in an 83.6 km² study area. Each landslide volume is calculated by subtraction of the 2005 DTM from the 2010 DTM, and the scaling relationship between landslide area and its volume are further regressed. The relationship between volume and area are also determined for all the disturbed areas (V_L = 0.452A_L^1.242) and for the crown areas of the landslides (V_L = 2.510A_L^1.206). The uncertainty in estimated volume caused by use of the LiDAR DTMs is discussed, and the error in absolute volume estimation for landslides with an area >10⁵ m² is within 20%. The volume–area relationship obtained in this study is also validated in 11 small to medium‐sized catchments located outside the study area, and there is good agreement between the calculation from DTMs and the regression formula. By comparison of debris volumes estimated in this study with previous work, it is found that a wider volume variation exists that is directly proportional to the landslide area, especially under a higher scaling exponent. Copyright © 2013 John Wiley & Sons, Ltd.     

张家口—渤海地震活动带中东段地壳剪切波分裂研究

张家口—渤海地震活动带是我国华北地区一条重要的地震带.该区域的主压应力场方向为近EW向.本文利用2005年9月-2010年9月首都圈地区地震台站记录到的数字波形资料,采用SAM方法(剪切波分裂系统分析法),研究讨论张家口 渤海地震带中东段地壳介质各向异性的空间分布特征.结果显示:张渤活动带中部及以东区域总体的优势方向明显,为近EW方向.横跨张渤活动带两侧的快剪切波优势偏振方向的空间分布显示,地震带北侧燕山隆起区内、地震带范围内和地震带南侧华北盆地内的快剪切波优势偏振方向均为近EW方向,差异不大.     

Modeling the sediment yield from landslides in the Shihmen Reservoir watershed,Taiwan

Landslides generate enormous volumes of sediment in mountainous watersheds; however, quantifying the downstream transport of landslide‐derived sediment remains a challenge. Landslide erosion and sediment delivery to the Shihmen Reservoir watershed in Taiwan was estimated using empirical landslide frequency–area and volume–area relationships, empirical landslide runout models, and the Hydrological Simulation Program‐ FORTRAN (HSPF). Landslide erosion rates ranged from 0.4 mm yr^‐1 to 2.2 mm yr^‐1 during the period 1986–2003, but increased to 7.9 mm yr^‐1 following Typhoon Aere in 2004. The percentage of landslide sediment delivered to streams decreased from 78% during the period 1986–1997 to 55% in 2004. Although the delivery ratio was lower, the volume of landslide sediment delivered to streams was 2.81 × 10⁶ Mg yr^‐1 in 1986–1997 and 8.60 × 10⁶ Mg yr^‐1 in 2004. Model simulations indicate that only a small proportion of the landslide material was delivered downstream. An average of 13% of the landslide material delivered to rivers was moved downstream during the period 1986–1997. In 2004, the period including Typhoon Aere, the annual fluvial sediment yield accounted for approximately 23% of the landslide material delivered to streams. In general, the transfer of sediment in the fluvial system in the Shihmen Reservoir watershed is dominantly transport limited. The imbalance between sediment supply and transport capacity has resulted in a considerable quantity of landslide material remaining in the upper‐stream regions of the watershed. Copyright © 2012 John Wiley & Sons, Ltd.     

Contribution to the Global Warming Mitigation of Marshlands Conversion to Croplands in the Sanjiang Plain,Northeast China

Based on the estimation of greenhouse gases (GHG) emissions and carbon sequestration of the total conversion of marshlands (TMC), marshlands conversion to paddy fields (MCPFs) and marshlands conversion to uplands (MCULs), this study revealed the contribution to the global warming mitigation (CGWM) of paddy fields versus uplands converted from marshlands in the Sanjiang Plain (excluding the Muling‐Xingkai Plain on south of Wanda Mountain), Heilongjiang Province, northeast China. The results showed that the total area of MCPFs and MCULs was 504.23 × 10³ ha between 1982 and 2005. The CGWM per unit area was 45.53 t CO₂eq/ha for MCPFs and that was 23.95 t CO₂eq/ha for MCULs, with an obvious 47.40% reduction. The MCPFs and MCULs ecosystems acted as the carbon sink all of the year. As far as CGWM per unit area is concerned, MCPFs mitigated the greenhouse effect which was greater than MCULs. And it was effective that the implementation of the uplands transformed into paddy fields in Northeast China with regard to marshlands protection and croplands (including paddy fields and uplands) reclamation.     

卧龙湖煤矿岩浆侵入特征及控制因素分析

岩浆侵入对煤矿生产影响极大,淮北煤田卧龙湖煤矿是受岩浆侵入较严重的矿井之一,其地质构造是控制岩浆侵入和岩浆岩展布的重要因素。卧龙湖煤矿自侏罗纪以来岩浆活动剧烈,发生了中性岩浆的侵入,多以岩床形式顺层侵入煤层顶底板及煤层中间。本文基于矿区钻孔数据揭露的岩浆岩分布情况,分析了结果表明卧龙湖矿区岩浆侵入规律,受煤层的形态、结构、理化性质以及产状的控制。     

基于“天地图”的位置服务平台的设计与实现

在位置服务平台建设过程中,为了解决全国性地图数据源、标准统一、详实性、现势性等问题,设计在地图数据源上采用国家、省、市三级的"天地图"地图服务。并且介绍了平台的分布式架构、多服务器集群服务技术、多终端协议集成服务技术及"天地图"接入实现应用的方法。     

青藏高原东北缘上地幔地震各向异性:来自SKS、PKS和SKKS震相分裂的证据

基于青藏高原东北缘甘肃区域台网41个宽频带地震台站的远震记录资料,通过PKS、SKS和SKKS震相的剪切波分裂分析,获取了台站下方介质的各向异性分裂参数,得到该地区上地幔各向异性分布图像,并结合GPS速度场和地壳剪切波各向异性分析青藏高原东北缘各向异性形成机制及壳幔各向异性特征.分析结果认为,在阿尔金断裂带西侧,各向异性快波偏振呈NWW-SEE方向,与断裂带走向有一定夹角,与塔里木盆地向柴达木盆地俯冲方向一致,说明该地区上地幔物质变形主要受古构造运动的影响,属于"化石"各向异性.在祁连山-河西走廊构造区,XKS快波偏振呈NW-SE方向,一致性较好,与区域断层走向方向相同;由区域小震的地壳剪切波分裂分析得到的地壳剪切波快波偏振在该区域呈NE-SW方向,与相对于稳定欧亚大陆GPS运动速率一致,地壳和地幔快波偏振方向的差异表明壳幔变形可能有不同的形变机制.在陇中盆地及其周缘,由于处于活跃青藏地块与稳定鄂尔多斯地块之间的过渡带,相对于其他区域具有更加复杂的构造背景,地壳快波偏振和地幔快波偏振总体上呈NWW-SEE方向,说明壳幔变形机制可能相同;但不同台站结果之间存在一定离散性,推测是由于受局部构造特征差异性造成.     

条件随机场的多极化InSAR联合相位解缠算法

提出一种基于CRF模型的多极化InSAR联合相位解缠算法,用于在多极化方式的InSAR中选择最优通道的解缠相位计算高程。其中,缠绕相位的联合条件概率的倒数用作一元似然能量项,全变分对应的解缠相位的平滑度用作二元先验能量项,通过将两者统一的能量函数进行计算并优化,减少了相位解缠和单通道的噪声引起的误差。试验证明,该方法获得的高程精度优于最大似然估计高程。