Eco-environmental impact assessment of pre-leisure beach nourishment on the benthic invertebrate community at Anping coast

In recent years,owing to global warming and the rising sea levels,beach nourishment and groin building have been increasingly employed to protect coastal land from shoreline erosion.These actions may degrade beach habitats and reduce biomass and invertebrate density at sites where they were employed.We conducted an eco-environmental evaluation at the Anping artificial beach-nourishment project area.At this site,sand piles within a semi-enclosed spur groin have been enforced by use of eco-engineering concepts since 2003.Four sampling sites were monitored during the study period from July 2002 to September 2008.The environmental impact assessment and biological investigations that we conducted are presented here.The results from this study indicate that both biotic(number of species,number of individual organisms,and Shannon-Wiener diversity) and abiotic parameters(suspended solids,biological oxygen demand,chemical oxygen demand,dissolved inorganic nitrogen,dissolved inorganic phosphorus,total phosphorus,total organic carbon,median diameter,and water content) showed significant differences before and after beach engineering construction.Biological conditions became worse in the beginning stages of the engineering but improved after the restoration work completion.This study reveals that the composition of benthic invertebrates changed over the study period,and two groups of organisms,Bivalvia and Gastropoda,seemed to be particularly suitable to this habitat after the semi-enclosed artificial structures completion.     

Transient analysis for fluid injection into a dome reservoir

A dome-shaped layer can be selected as a storage site for fluid injection. In this study, we develop a mathematical model for simulating transient head distribution in a heterogeneous and anisotropic dome-shaped layer due to a constant-head injection in a fully penetrating well. In the model, a form of step change is adopted to approximate the upper and lower boundaries of the dome and then the layer is split into two regions. The Laplace-domain solution of the model is developed using the Laplace transform and method of separation of variables. The transient injection rate at wellbore can then be obtained based on Darcy’s law and Bromwich integral method. The predicted head contours from the head solution show significant vertical flow components near the location of step change in the dome reservoir. The results of sensitivity analysis indicate that the hydraulic conductivity is the most sensitive parameter and the specific storage is the least sensitive one to the injection rate after a short period of injection time. In addition, the injection rate for a dome reservoir is also very sensitive to the change of the height for the reservoir near the injection well (first region) at a very early injection time. In contrast, the injection rate is more sensitive to the change of the height of the second region than that of the first region at late time. This analytical solution may be used as a primary tool to assess the capacity of fluid injection to various dome reservoirs.     

A new prototype system for earthquake early warning in Taiwan

A new prototype earthquake early warning (EEW) system is being developed and tested using a real-time seismographic network currently in operation in Taiwan. This system is based on the Earthworm environment which carries out integrated analysis of real-time broadband, strong-motion and short-period signals. The peak amplitude of displacement in the three seconds after the P arrival, dubbed P_d, is used for the magnitude determination. Incoming signals are processed in real time. When a large earthquake occurs, P-wave arrival times and P_d will be estimated for location and magnitude determinations for EEW purpose. In a test of 54 felt earthquakes, this system can report earthquake information in 18.8±4.1 s after the earthquake occurrence with an average difference in epicenter locations of 6.3±5.7 km, and an average difference in depths of 7.9±6.6 km from catalogues. The magnitudes approach a 1:1 relationship to the reported magnitudes with a standard deviation of 0.51. Therefore, this system can provide early warning before the arrival of S-wave for metropolitan areas located 70 km away from the epicenter. This new system is still under development and being improved, with the hope of replacing the current operational EEW system in the future.     

Evaluating empirical regression equations for Vs and estimating Vs30 in northeastern Taiwan

The shear wave velocity of shallow sediments is very important in seismic wave amplification and thus Vs30 is a well-known parameter for site classification. Based on the relationship between Vs and soil indexes, the empirical regression equations were evaluated using more than 600 data sets from the Ilan area and the Taipei Basin. Multivariable analysis, which can increase the accuracy of regression equations, was used in this study. Three extrapolations were compared, and then the most accurate bottom-constant extrapolation was adopted to estimate Vs30 at 16 boreholes, none of which reached a depth of 30 m. Ultimately Vs30 was derived for 110 free-field strong motion stations, and the stations in northeastern Taiwan were reclassified according to the Vs30-based NEHRP provisions. Regression equations of Vs and the extrapolation of Vs30 were also applied to boreholes with only N-values and corresponding depths of less than 30 m for assessing the Vs30 and NEHRP class.     

Risk assessment on storm surges in the coastal area of Guangdong Province

The coastal area of Guangdong Province is one of the most developed regions in China. It is also often under severe risk of storm surges, as one of the few regions in China which are seriously threatened by storm surges. Based on the data of storm surges in the study area in the past 30 years, the return periods of 18 tide stations for storm surge are calculated separately. Using the spatial analysis technology of ArcGIS, combined with the topography data of the study area, the submerged scope for storm surge in the coastal area of Guangdong Province is determined, and the hazard assessment is carried out. According to the view of systematic point, this article quotes the result of vulnerability assessment which was done by the author in the previous research. Based on the hazard evaluation and vulnerability evaluation, risk assessment of storm surges in the study region is done, and the risk zoning map is drawn. According to the assessment, Zhuhai, Panyu and Taishan are classified as the highest risk to storm surges in Guangdong Province; Yangdong, Yangjiang and Haifeng are in higher risk to storm surges; Dongguan, Jiangmen, Baoan and Huidong are in middle risk to storm surges; Zhongshan, Enping, Shanwei, Huiyang, Longgang and Shenzhen are in lower risk of storm surges; Guangzhou, Shunde and Kaiping are in the lowest risk to storm surges. This study builds a complete process for risk assessment of storm surges. It reveals the risk of storm surges in the coastal cities, and it would guide the land use of coastal cities in the future and provide scientific advices to the government for the prevention and mitigation of storm surge disaster. It has important theoretical and practical significance.     

广东省典型花岗岩成土剖面元素垂向分布特征

对广东省南部花岗岩广泛发育地区的两个花岗岩风化剖面进行部分主量元素和重金属元素含量变化的研究表明:研究区成土过程是Na、Mg、K、Ca持续风化淋失的过程,且风化程度较高,土壤剖面中重金属元素与主量元素含量的变化趋势一致.研究区两土壤剖面的淋溶作用较强,淋溶层深达200 cm,淀积层深度为100～300 cm.在淀积层内,随着Ca、K、Na、Mg等主量元素的新生矿物沉淀,As、Cd、Pb、Zn、Ni等元素也相对富集,是广东地区深层土壤As、Pb等元素含量高于表层土壤的可能成因之一.     

Improvement of earthquake locations with the Marine Cable Hosted Observatory (MACHO) offshore NE Taiwan

In order to improve the locating capability for offshore earthquakes and tsunamis monitored off northeastern Taiwan, a cable-based ocean bottom seismographic observatory named “Marine Cable Hosted Observatory” (MACHO) was constructed and began operation at the end of 2011. The installed instruments of the observatory include a broadband seismometer, a strong-motion seismometer and a pressure gauge. In addition, various scientific instruments could be deployed for other purposes as well. At present, the seismic data are transmitted in real-time via a fiber cable, and integrated into the current inland seismographic network in Taiwan. The ocean bottom station has contributed to provide high quality seismic data already. According to observations from January 2012 to June 2013, there were a total of 15,168 earthquakes recorded by the system. By using the data from the ocean bottom station, the number of relocated earthquakes with an azimuth gap less than 180 degrees substantially increase about 34 %. Meanwhile, the root–mean–square of the time residual, the error in epicenter, and the error in depth of the earthquake locations decrease. Therefore, the implementation of MACHO has the advantage of extending the coverage of existing the Taiwan seismic network to the offshore, providing more accurate and real-time seismic data for offshore earthquakes monitoring. The results show that MACHO is crucial and necessary for monitoring seismic activities in northeastern Taiwan.     

Analytical and experimental studies on midstory isolated buildings with modal coupling effect

In a midstory isolated building, the isolation system is incorporated into the midstory rather than the base of the building. Because of the flexibility of the substructure below the isolation system in a midstory isolated building, the contribution of higher modes to the seismic responses of the midstory isolated structure may not be negligible, especially when the coupling of higher modes exists. To investigate this modal coupling effect, a simplified three‐lumped‐mass structural model of the midstory isolated building is assumed in this study. Through the equivalent linear analysis and shaking table tests, it is found that the coupling of higher modes may lead to enlarged acceleration responses at the super‐floor and superstructure above the isolation layer. Accordingly, a simple method to prevent the midstory isolation design from the coupling of higher modes attributed to the improper design of the substructure and superstructure is proposed in this paper. Copyright © 2012 John Wiley & Sons, Ltd.     

Determining transition reaches between torrents and downstream rivers using a valley morphology index in a mountainous landscape

Dividing rivers into homogeneous reaches is key for river processes and watershed management. In contrast to downstream fluvially dominated rivers, upstream debris-flow dominated torrents have steeper channel slopes and smaller valley width/depth ratios. Investigating transition reaches between torrents and fluvially dominated rivers, not only explores the structure of the landscape, but also contributes to hazard management. This study proposed a valley morphology index combining two variables, channel slope and valley width/depth ratio, to determine transition reaches between torrents and rivers. The methodology was applied to 41 mountain streams in Taiwan using a Geographic Information System (GIS)-based topographic analysis. Plots of valley width/depth ratio versus channel slope were used to determine boundary values of the valley morphology index (I_v) separating torrents from rivers. The plots showed that about 80% of the river basins present “L-shaped” curves, which indicate sharp decreases in slope for upstream sections and dramatic increases of valley width/depth ratio for downstream sections. Results further demonstrated an average value of I_v 0.0047 across the study sites. Spatial comparison between geographic regions indicated that transition reaches in eastern rivers tend to occur lower in the drainage basin due, in part, to higher terrain. Local factors, such as tributary confluences and landslides promote the transition from torrents to fluvially dominated rivers. Satellite images verified that the approach correctly identified transition reaches, suggesting that it may provide a useful reference for river management.     

Cyclic behavior of precast segmental concrete bridge columns with high performance or conventional steel reinforcing bars as energy dissipation bars

The cyclic behavior of precast segmental concrete bridge columns with high performance (HP) steel reinforcing bars and that with conventional steel reinforcing bars as energy dissipation (ED) bars were investigated. The HP steel reinforcing bars are characterized by higher strength, greater ductility, and superior corrosion resistance compared with the conventional steel reinforcing bars. Three large‐scale columns were tested. One was designed with the HP ED bars and two with the conventional ED bars. The HP ED bars were fully bonded to the concrete. The conventional ED bars were fully bonded to the concrete for one column, whereas unbonded for a length to delay fracture of the bars and to increase energy dissipation for the other column. Test results showed that the column with the HP ED bars had greater drift capacity, higher lateral strength, and larger energy dissipation than that with fully bonded conventional ED bars. The column with unbonded conventional ED bars achieved the same drift capacity and similar energy dissipation capacity as that with the HP ED bars. All the three columns showed good self‐centering capability with residual drifts not greater than 0.4% drift. An analytical model referred to as joint bar‐slip rotation method for pushover analysis of segmental columns with ED bars is proposed. The model calculates joint rotation from the slip of the ED bars from two sides of the joint. Good agreement was found between analytical predictions and the envelope responses of the three columns. Copyright © 2010 John Wiley & Sons, Ltd.