Geomorphological evidence for upslope canyon-forming processes on the northern KwaZulu-Natal shelf,SW Indian Ocean,South Africa

A geomorphological and statistical analysis of slope canyons from the northern KwaZulu-Natal continental margin is documented and compared with submarine canyons from the Atlantic margin of the USA. The northern KwaZulu-Natal margin is characterized by increasing upslope relief, concave slope-gradient profiles and features related to upslope growth of the canyon forms. Discounting slope-gradient profile, this morphology is strikingly similar to canyon systems of the New Jersey slope. Several phases of canyon incision indicate that downslope erosion is also an important factor in the evolution of the northern KwaZulu-Natal canyon systems. Despite the strong similarities between the northern KwaZulu-Natal and New Jersey slope-canyon systems, key differences are evident: (1) the concavity of the northern KwaZulu-Natal slope, contrasting with the ∼linear New Jersey slope; (2) the relative isolation of the northern KwaZulu-Natal canyons, rather than the dense clustering of the New Jersey canyons; and (3) the absence of strongly shelf-breaching canyons along the northern KwaZulu-Natal margin. In comparison with the New Jersey margin, we surmise a more youthful stage of canyon evolution, a result of either the canyons themselves being younger or the formative processes being less active. Less complicated patterns of erosion resulting from reduced sediment availability have developed in northern KwaZulu-Natal. The reduction in slope concavity on the New Jersey margin may be the result of grading of the upper slope by intensive headward erosion, a process more subdued—or less evident—on the KwaZulu-Natal margin.     

Magnetic anomalies in the canary basin and the Mesozoic evolution of the central North Atlantic

The data from a recent magnetic compilation by Verhoefet al. (1991) off west Africa were used in combination with data in the western Atlantic to review the Mesozoic plate kinematic evolution of the central North Atlantic. The magnetic profile data were analyzed to identify the M-series sea floor spreading anomalies on the African plate. Oceanic fracture zones were identified from magnetic anomalies and seismic and gravity measurements. The identified sea floor spreading anomalies on the African plate were combined with those on the North American plate to calculate reconstruction poles for this part of the central Atlantic. The total separation poles derived in this paper describe a smooth curve, suggesting that the motion of the pole through time was continuous. Although the new sea floor spreading history differs only slightly from the one presented by Klitgord and Schouten (1986), it predicts smoother flowlines. On the other hand, the sea floor spreading history as depicted by the flowlines for the eastern central Atlantic deviates substantially from that of Sundvik and Larson (1988). A revised spreading history is also presented for the Cretaceous Magnetic Quiet Zone, where large changes in spreading direction occurred, that can not be resolved when fitting magnetic isochrons only, but which are evident from fracture zone traces and directions of sea floor spreading topography.Deceased 11 November 1991     

Input of atmospheric lead to marine sediments in a south-east Pacific coastal area (approximately 36 degrees S)

Atmospheric input of Pb to coastal sediments in the south-east Pacific (approximately 36 degrees S) was estimated using: (1) a salt marsh (non-local emission sources) as a natural collector of atmospheric fluxes and (2) Pb concentrations in rain and air samples, both considered to be representative of the atmospheric input in the study area. A radioisotopic geochronology technique ((210)Pb) was used to estimate the total Pb atmospheric supply to the sediments. The results show that atmospheric input to Concepción Bay accounts for 13-68% of Pb in near shore sediments, evaluated through salt marsh and rain, both showing comparable results. Consequently, there are other relevant Pb sources to explain the higher concentrations in this area. Sediments in the shelf are subject to important influence of upwelling waters, estimated by Salamanca [Sources and sinks of (210)Pb in Concepción Bay, Chile (1993) PhD thesis, Marine Science Research Center, State University of New York at Stony Brook, USA] using (210)Pb. The atmospheric input, however, is mainly responsible for the total Pb input, since the salt marsh (natural atmospheric collector) shows similar Pb(xs) inventories than the shelf, corresponding to a regional-scale Pb emissions.     

Effects of scattering and resonance on energy dissipation of an internal tide in a narrow shelf

The effects of scattering and resonance on the energy dissipation of an internal tide were investigated using a two-dimensional model which is a reassembled version of the theoretical generation model devised by Rattray et al. (1969) for internal tide. The basic character of the scattering process at the step bottom was first investigated with a wide shelf model. When the internal wave incited from a deep region (Region II) into the shallow shelf region (Region I), a passing wave into the shallow region, a reflected wave into the deep region, and a beam-like wave, i.e. a scattered wave (SW), emanated at the step bottom. The SW, which consists of the superposition of numerous internal modes, propagated upward/downward into both regions. The general properties of the SW were well expressed around the shelf edge, even in the present model with viscosity effect. The amplitude of the SW decreased dramatically when the depth of the velocity maximum of the incident internal wave in Region II corresponded with the depth of the shelf edge. In the narrow shelf model, where the decay distance of the internal wave in Region I is longer than the shelf width, the incident internal wave reflected at the coast to form a standing wave. When the internal wave in Region I is enhanced by the resonance, the energy of the SW in Region II is also intensified. Furthermore, the energy of the modes in Region II predominated when the velocity maximum is identical to that of the dominant mode in Region I. These results suggest that the spatial scale of shelf region is a very important factor governing the energy dissipation of the internal tide through reflection and scattering in a narrow shelf.     

Effects of salinity downshock on dimethylsulfide production

During time-series observations in Sagami Bay, Japan, the concentration of dissolved dimethylsulfoniopropionate (DMSP_d), a precursor of dimethylsulfide (DMS), was negatively correlated with salinity. In the laboratory, low-salinity shock reduced DMS production rates of the natural bacterial community and induced rapid DMSP release from a dinophyte, Heterocapsa triquetra, suggesting that low-salinity shock reduced DMSP_d consumption but enhanced DMSP_d production, which agrees with the negative correlation between DMSP_d and salinity observed in Sagami bay. In addition, low-salinity shock did not affect DMSP lyase activity of H. triquetra. Low-salinity shock would increase the contribution from algae in DMS production, leading to an increase in potential DMS productivity in the environment.     

Longshore drift estimation using fluorescent tracers: New insights from an experiment at Comporta Beach, Portugal

A fluorescent sand-tracer experiment was performed at Comporta Beach (Portugal) with the aim of acquiring longshore sediment transport data on a reflective beach, the optimization of field and laboratory tracer procedures and the improvement of the conceptual model used to support tracer data interpretation.

The field experiment was performed on a mesotidal reflective beach face in low energetic conditions (significant wave height between 0.4 and 0.5 m). Two different colour tracers (orange and blue) were injected at low tide and sampled in the two subsequent low tides using a high resolution 3D grid extending 450 m alongshore and 30 m cross-shore. Marked sand was detected using an automatic digital image processing system developed in the scope of the present experiment.

Results for the two colour tracers show a remarkable coherence, with high recovery rates attesting data validity. Sand tracer displayed a high advection velocity, but with distinct vertical distribution patterns in the two tides: in the first tide there was a clear decrease in tracer advection velocity with depth while in the second tide, the tracer exhibited an almost uniform vertical velocity distribution. This differing behaviour suggests that, in the first tide, the tracer had not reached equilibrium within the transport system, pointing to a considerable time lag between injection and complete mixing. This issue has important implications for the interpretation of tracer data, indicating that short term tracer experiments tend to overestimate transport rates. In this work, therefore, longshore estimates were based on tracer results obtained during the second tide.

The estimated total longshore transport rate at Comporta Beach was 2 × 10^− 3 m³/s, more than four times larger than predicted using standard empirical longshore formulas. This discrepancy, which results from the unusually large active moving layer observed during the experiment, confirms the idea that most common longshore transport equations under-estimate total sediment transport in plunging/surging waves.     

Algorithm for HF radar vector current measurements

A new algorithm is proposed, called the stream function method (SFM) for producing vector current maps from radial data measured by dual-site high frequency surface wave radar (HFSWR). In SFM, a scalar stream function is constructed under some oceanographic assumptions. The function describes the two-dimensional (2-D) ocean surface water motion and is used to obtain the distribution of vector currents. The performance of SFM is evaluated using simulated radial data, which demonstrates that SFM has advantages over typical vectorial combination methods (VCM) both in error acceptance and robustness, and excels another method based on least-squares fitting (LSF) in recovering the complicated current models. Furthermore, SFM is capable of providing the total currents based on radials from single-site radar. We also test the assumptions of horizontal non-divergence in the simulation. The new algorithm is applied to the field experiment data of Wuhan University’s ocean state measuring and analyzing radar (OSMAR), collected in the coastal East China Sea during April 11–17, 2004. Quantitative comparisons are given between radar results by three current algorithms and in-situ current meter measurements. Preliminary analysis of the vertical current shear is given based on the current meter measurements.     

Tectonic core of a sedimentary drift: a potential ridge propagation feature beneath the Blake Outer Ridge

The Blake Outer Ridge is a 480–kilometer long linear sedimentary drift ridge striking perpendicular to the North American coastline. By modeling free-air gravity anomalies we tested for the presence of a crustal feature that may control the location and orientation of the Blake Outer Ridge. Most of our crustal density models that match observed gravity anomalies require an increase in oceanic crustal thickness of 1–3 km on the southwest side of the Blake Outer Ridge relative to the northeast side. Most of these models also require 1–4 km of crustal thinning in zone 20–30 km southwest of the crest of the Blake Outer Ridge. Although these features are consistent with the structure of oceanic fracture zones, the Blake Outer Ridge is not parallel to adjacent known fracture zones. Magnetic anomalies suggest that the ocean crust beneath this feature formed during a period of mid-ocean ridge reorganization, and that the Blake Outer Ridge may be built upon the bathymetric expression of an oblique extensional feature associated with ridge propagation. It is likely that the orientation of this trough acted as a catalyst for sediment deposition with the start of the Western Boundary Undercurrent in the mid-Oligocene.     

Microphytobenthos vertical migratory photoresponse as characterised by light-response curves of surface biomass

The migratory response of intertidal microphytobenthos to changes in irradiance was studied on undisturbed estuarine sediments. Two non-destructive optical techniques were used to trace variations in vivo of surface biomass: PAM fluorometry, for measuring the minimum fluorescence level (F_o); and spectral reflectance analysis, for quantifying the normalized difference vegetation index (NDVI). Following the formation of a dense biofilm at the surface, replicated sediment samples were simultaneously exposed to six different irradiance levels, ranging from 50 to 1500 μmol m⁻² s⁻¹, during a period of 120 min. The migratory photoresponse of the biofilms was characterised by constructing biomass vs. light curves (BLC), relating the accumulation of microalgal biomass after that period (estimated by F_o or NDVI) to the irradiance level incident on the surface. BLCs allow characterising the main features of the migratory photoresponse of intact biofilms. Typical BLC showed a clear biphasic pattern, with an increase in microalgal accumulation under irradiances below 100 μmol m⁻² s⁻¹, maximum values under 100–250 μmol m⁻² s⁻¹, and a gradual decrease of surface biomass under higher irradiances, indicating a strong photophobic downward migratory response. Similar BLC patterns were obtained when measuring F_o or NDVI. The construction of BLCs for biofilms from intertidal sites with distinctive sediment characteristics and diatom taxonomic composition allowed to detected significant differences in the migratory photoresponse. Biofilms from a muddy sediment exhibited considerably larger amplitude in the migratory photoresponse than the biofilms from a sandy mud site, especially under high irradiances. The photophobic migratory response to high light was found to vary among diatom species, particularly in the case of the biofilms from the muddy sediments.     

Jellyfish patch formation investigated by aerial photography and drifter experiment

Jellyfish patch formation is investigated by conducting a drifter experiment combined with aerial photography of a sustained patch of the moon jellyfish in Hokezu Bay, Japan. Jellyfish patches are aggregations of individuals that are caused by a combination of swimming (active influence) and advection by currents (passive influence). The drifter experiment involved the injection of 49 drifters around a distinct surface patch of jellyfish within an area of approximately 300 m × 300 m. The drifters’ motion, caused only by the passive influence, was recorded in a series of 38 aerial photographs taken over approximately 1 h. The ambient uniform current field larger than the patch scale was estimated from the movement of the centroid position of drifters, while the distribution of horizontal divergence and relative vorticity around the patch was estimated from the time-derivative in areas of triangles formed by the drifters. The centroid positions of both drifters and patches moved stably toward the bay head at different speeds. The difference vector between the patch and drifter centroids was directed to the sun, and was opposite to the ambient current. The distributions of vorticity and divergence around patches exhibited inhomogeneity within the patch scale, and the drifters in this nonuniform current field aggregated near the convergence area within 1 h. The results suggest that horizontal patch formation is predominantly influenced by passive factors at the surface of Hokezu Bay. Furthermore, the upward swimming against downwelling may make sustained patch in surface layer.