U–Pb zircon ages and Sr-Nd-Pb isotopic compositions for Permian–Jurassic plutons in the Ogcheon belt and Ryeongnam massif, Korea: Tectonic implications and correlation with the China Qinling–Dabie belt and the Japan Hida belt

Abstract The Ogcheon fold belt and the Ryeongnam massif in the Korean Peninsula are made up of Precambrian igneous and sedimentary rocks that have been metamorphosed, tectonically deformed and extensively intruded by mafic to felsic plutonic rocks of Permian to Jurassic age. In the present study, we report seven new U–Pb zircon ages and Sr‐Nd‐Pb isotopic data for Permian to Jurassic plutons in the Ogcheon belt and the Ryeongnam massif. In the Ogcheon belt, these are: the Cheongsan porphyritic granite (217 ± 3.1 My), the Baegrog foliated granodiorite (206.4 ± 3.6 My), the Sani granite (178.8 ± 2.9 My) and the Yeonggwang foliated granite (173.0 ± 1.7 My). For the Ryeongnam massif, we report on the Yeongdeog foliated granodiorite (252.2 ± 2.9 My), the Sancheong gabbro (203.8 ± 3.3 My) and the Baegseogri foliated granodiorite (177.8 ± 2.4 My). All of these ages are lower concordia intercepts; the upper concordia intercepts indicate derivation from a Precambrian protolith. Sr, Nd and Pb isotopes also reveal that much of the Permian–Jurassic (252–173 Ma) plutonism in Korea was generated by recycling of Precambrian rocks. These new ages, together with other published zircon ages indicate that the plutonism in the Ogcheon fold belt is coeval with that in the Ryeongnam massif, but based on the Sr‐Nd‐Pb isotopic evidence, they are not cogenetic. In addition, zircon ages provide information on the movement along the Honam shear zone, which cuts across the whole Korean Peninsula and along most of its length provides the boundary between the Ogcheon fold belt and the Ryeongnam massif. It has a prolonged history of movement and deformation and appears to have been active from the Precambrian through to the Mesozoic, from before 1924 Ma to at least 180 Ma. The Permian–Jurassic igneous and tectonic activity in Korea is a manifestation of the more extensive orogenic activities that affected the East Asian continent at that time. In China, ultra high‐pressure rocks of the Qinling–Dabie belt formed between 210 and 230 Ma as result of the collision between the South China block and the North China block. In central Japan, corresponding plutonic activity is dated as 175 to 231 Ma. The absence of ultra high‐pressure rocks in Korea and Japan precludes a simple extension of the Qinling–Dabie belt eastwards; however, the effects of the continental collision eastwards are apparent from the igneous and tectonic activity.     

Tectonic controls on spatio-temporal development of depositional systems and generation of fining-upward basin fills in a strike-slip setting: Kyokpori Formation (Cretaceous), south-west Korea

Abstract The Kyokpori Formation (Cretaceous), south‐west Korea, represents a small‐scale lacustrine strike‐slip basin and consists of an ≈ 290 m thick siliciclastic succession with abundant volcaniclasts. The succession can be organized into eight facies associations representing distinctive depositional environments: (I) subaqueous talus; (II) delta plain; (III) steep‐gradient large‐scale delta slope; (IV) base of delta slope to prodelta; (V) small‐scale nested Gilbert‐type delta; (VI) small‐scale delta‐lobe system; (VII) subaqueous fan; and (VIII) basin plain. Facies associations I, III and IV together constitute a large‐scale steep‐sloped delta system. Correlation of the sedimentary succession indicates that the formation comprises two depositional sequences: the lower coarsening‐ to fining‐upward succession (up to 215 m thick) and the upper fining‐upward succession (up to 75 m thick). Based on facies distribution, architecture and correlation of depositional sequences, three stages of basin evolution are reconstructed. Stage 1 is represented by thick coarse‐grained deposits in the lower succession that form subaqueous breccia talus and steep‐sloped gravelly delta systems along the northern and southern basin margins, respectively, and a sandy subaqueous fan system inside the basin, abutting against a basement high. This asymmetric facies distribution suggests a half‐graben structure for the basin, and the thick accumulation of coarse‐grained deposits most likely reflects rapid subsidence of the basin floor during the transtensional opening of the basin. Stage 2 is marked by sandy black shale deposits in the upper part of the lower succession. The black shale is readily correlated across the basin margins, indicating a basinwide transgression probably resulting from large‐scale dip slip suppressing the lateral slip component on basin‐bounding faults. Stage 3 is characterized by gravelly delta‐lobe deposits in the upper succession that are smaller in dimension and located more basinward than the deposits of marginal systems of the lower succession. This lakeward shift of depocentre suggests a loss of accommodation in the basin margins and quiescence of fault movements. This basin evolution model suggests that the rate of dip‐slip displacement on basin‐margin faults can be regarded as the prime control for determining stacking patterns of such basin fills. The resultant basinwide fining‐upward sequences deviate from the coarsening‐upward cycles of other transtensional basins and reveal the variety of stratigraphic architecture in strike‐slip basins controlled by the changes in relative sense and magnitude of fault movements at the basin margins.     

Radiaxial fibrous calcites as low-magnesian calcite cement precipitated in a marine-meteoric mixing zone

Abstract Radiaxial fibrous calcite (RFC) has previously been interpreted as a marine or replacive cement. Study of the Dongjeom Formation (Early Ordovician), Korea, shows that RFC can form in marine‐meteoric mixing zones as a low‐magnesian calcite (LMC) cement. RFC in the shallow‐marine Dongjeom Formation occurs in arenaceous limestones at the top of a transgressive facies overlying a regressive facies. It shows well‐developed growth zonation, and lighter oxygen isotope values and more radiogenic strontium isotope ratios than those of Early Ordovician marine calcite. Such petrographic and chemical evidence indicates that the RFC was precipitated as a primary LMC cement in a marine and meteoric mixing zone. Owing to the unique environment of formation, the Dongjeom RFC is characterized by growth zonal fabric comprising alternating subzones, which may indicate precipitation from varying fluids. In addition, this study documents the importance of substrate for development of RFC. Early ‘nucleation’ for RFC occurred mainly on microcrystalline skeletal grains and internal sediments, whereas on homogeneously altered substrates, thin‐coated banding structure developed, ultimately forming coarse crystalline spar. This suggests that microcrystalline substrates are preferred sites for nucleation of RFC.     

Interaction between groundwater quality and hydraulic head in an area around an underground LPG storage cavern,Korea

The interactive influence between groundwater flow and salinization that occurs in an underground LPG cavern site in Korea was investigated using chemical analysis data and cross-correlation analysis between hydraulic head and operating pressure data. The concentration of the major cations and anions showed a large difference between rainy and dry seasons due to the seasonal intrusion of highly saline water into the cavern area. However, the Cl/Br ratio and '¹⁸O-Cl relationship showed that two types of saline water (seawater and halite-dissolved solution) influenced the groundwater salinization of the study area. The cross-correlation results revealed that a positive relationship between hydraulic head and cavern operating pressure was far more conspicuous in the propane cavern area (89-91% of correlation coefficients), and tidal change influenced the head variation in the butane cavern area. That is, continuous intrusion of seawater near the South Sea could bring about a high concentration of major cations and anions in the butane seepage waters and groundwaters near the coastal area, and seasonal variation in the operating pressure at the propane cavern played an important driving force in fast infiltration of halite-dissolved solution from surface halite stock and a subsequent increase in Na and Cl concentration during the dry season.     

Microscopic observation and contact stress analysis of granite under compression

To study the damage process of microscale to macroscale in coarse-grained granite specimen under uniaxial compressive stress, we have observed micro-damage localization and propagation by using a newly developed experimental system that allows us to observe the damaging process continuously.

The results showed that pre-existing microcracks lead to macroscopic shear fracture through the damage development process. The mechanism of micro-damage initiation in a granite specimen under uniaxial compressive stress may be considered for two cases. One is that two grains such as quartz and feldspar contact each other in the same direction as the axial stress, and the other is that a biotite grain inclined to the axial stress direction is surrounded by feldspar grains. The homogenization theory was applied to verify numerically the micromechanics of stress-induced damage in the mineral contacts. Local stress distribution in the periodic-micro structure was also calculated by the homogenization theory. It is shown that this analysis, which takes into account the initial state of the specimen, is well adapted to the behavior of two grains for which microcracking is the fundamental mechanism of damage.     

Bearing capacity of strip foundation on geogrid-reinforced sand

Results of small-scale laboratory model tests to determine the ultimate bearing capacity of a strip foundation supported by sand with multiple layers of geogrid reinforcement are presented. Tests were conducted with only one type of geogrid and a sand compacted to one relative density. The embedment ratio of the foundation was varied from zero to 0.6. It is found that, for the given reinforcement-depth ratio, the bearing capacity ratio with respect to ultimate load increases with embedment. The relationship between the bearing capacity ratio at ultimate load and at limited levels of settlement (less than or equal to 5% of foundation width) is also presented. The bearing capacity ratio at limited levels of settlement is smaller than the value at ultimate load.     

Effect of boundary element details on the seismic deformation capacity of structural walls

The objective of this study is to investigate the effect of boundary element details of structural walls on their deformation capacities. Structural walls considered in this study have different sectional shapes and/or transverse reinforcement content at the boundaries of the walls (called boundary element details hereafter). Four full‐scale wall specimens (3000mm (h_w)×1500mm (l_w)×200mm (T)) were fabricated and tested. Three specimens are rectangular in section and the other specimen has a barbell‐shaped cross‐section (a wall with boundary columns). The rectangular wall specimens are reinforced according to the common practice used for reinforced concrete residence buildings in Korea and Chile. In this study, the primary variable for these rectangular specimens is the content of transverse reinforcement to confine the boundary elements of a wall. The barbell‐shaped specimen was designed in compliance with ACI 318‐95. The response of the barbell‐shaped specimen is compared with those of other rectangular specimens. The effective aspect ratio of the specimens is set to two in this study. Based on the experimental results, it is found that the deformation capacities of walls, which are represented by displacement ductility, drift ratio and energy dissipation capacities, are affected by the boundary element details. Copyright © 2002 John Wiley & Sons, Ltd.     

Hydrological Studies and Water Resource Concerns in Southeast Asia

Water supply shortage has become a pressing issue in Southeast Asia in recent years. While on the one hand water demand is escalating with rapid economic development, urbanisation and related population concentrations, on the other, surface water supply sources are increasingly being threatened by the resultant land use changes. Therefore, any understanding of the region's water supply concerns necessarily takes into account the hydrological processes and changes consequent to human interference of the natural environment. Changes to the environment that curtail the quantity of water supply and affect its quality will in turn have implications for water resource issues in megacities and other urban areas. Equally critical to the supply of water are water resource and management issues, in particular, the adequate provision of safe water for human consumption, regarded as not only meeting a basic need but also a human right. This paper provides an overview of hydrological processes and water resource concerns and suggests the scope for further investigation, particularly by geographers.     

Fluid Households,Complex Families: The Impacts of Children's Migration as a Response to HIV/AIDS in Southern Africa*

The fluidity of southern African families is related to a long history of internal and external migration. Currently, HIV/AIDS is having a dramatic impact on extended family structures, with the migration of individual members employed as a coping strategy. Children's migration is one aspect of this that is often distinct from that undertaken by other household members. This article is based on qualitative research conducted in Lesotho and Malawi with young migrants and the households that receive them. It examines the processes of fragmentation and re‐formation of households through the movements of children that are taking place in response to HIV/AIDS, and explores the impacts these processes have on young migrants and the households they join.     

Measurements Of Thermal Updraft Intensity Over Complex Terrain Using American White Pelicans And A Simple Boundary-Layer Forecast Model

An examination of boundary-layer meteorological and avian aerodynamic theories suggests that soaring birds can be used to measure the magnitude of vertical air motions within the boundary layer. These theories are applied to obtain mixed-layer normalized thermal updraft intensity over both flat and complex terrain from the climb rates of soaring American white pelicans and from diagnostic boundary-layer model-produced estimates of the boundary-layer depth z_i and the convective velocity scale w_*. Comparison of the flatland data with the profiles of normalized updraft velocity obtained from previous studies reveals that the pelican-derived measurements of thermal updraft intensity are in close agreement with those obtained using traditional research aircraft and large eddy simulation (LES) in the height range of 0.2 to 0.8 z_i. Given the success of this method, the profiles of thermal vertical velocity over the flatland and the nearby mountains are compared. This comparison shows that these profiles are statistically indistinguishable over this height range, indicating that the profile for thermal updraft intensity varies little over this sample of complex terrain. These observations support the findings of a recent LES study that explored the turbulent structure of the boundary layer using a range of terrain specifications. For terrain similar in scale to that encountered in this study, results of the LES suggest that the terrain caused less than an 11% variation in the standard deviation of vertical velocity.