Orbital evolution of asteroids with the effects of mutual gravitational attraction

The effects of the mutual gravitational attraction between asteroids were analyzed by two N-body calculations, in which N=4,516 (the Sun, the nine planets, and 4,506 asteroids). In one calculation the gravity of the asteroids was taken into account, and in the other it was ignored. These calculations were carried out for a time period of about 100 years. The largest difference in the positions of the asteroids between these two calculations is about 10^–3 AU. For the orbital elements of the semimajor axis, the eccentricity, and the inclination, the largest differences were 9 × 10^–6 AU, 4 × 10^–6, and 5 × 10^–4 degrees, respectively. It was found that the distribution of the differences of the semimajor axis between the two calculations is quite similar to the Cauchy distribution.     

New technologies and systems for high quality citrus fruit production,labor-saving and orchard construction in mountain areas of Japan

Novel technologies have been necessary for improving fruit quality and productivity of citrus,labor-saving and orchard conservation on steep slope lands since aging of growers and decrease in the number of successors is remarkable in mountain areas of southwestern Japan. The purpose of this paper is to introduce new technologies for improving citrus production that have been developed in recent years. A new fruit quality control system using drip irrigation and liquid fertilization technique combined with year-round plastic mulching was developed, and it enables high quality and stable citrus fruit production. Water and/or nutrient solution is automatically supplied through drip tubes that are laid under the mulching sheets to give adequate water stress, so as to improve sugar and acid content of fruit. A new transportation system for steep sloping citrus orchards, which is a combination of the monorail system and contour narrow paths, was suggested. A small walking cultivator was developed to explain the procedure of narrow path excavation. After introducing the narrow path, working hours for fertilizer and chemicalherbicide application were reduced. Disasterpr evention mapping of citrus orchards on slope landswas developed based on computer-aided seepage estimation and topographic data. The mapping can show zones of both ascending flow and descendingflow of underground water during heavy rains incitrus orchards. The mapping is considered to be effective for the management of orchards andprevention of erosion on slope lands.     

Nutrients,light and phytoplankton production in the shallow,tropical coastal waters of Bandon Bay,Southern Thailand

Phytoplankton primary production and its regulation by light and nutrient availability were investigated in the shallow, tropical coastal waters of Bandon Bay, Southern Thailand. The bay was meso‐eutrophicated and highly turbid, receiving river water discharge. Water column stratification was consistently weak during both rainy and dry seasons. Dissolved inorganic nitrogen (DIN) was higher off the river mouth than in the other regions, suggesting that river water discharge was a main source of DIN. By contrast, dissolved inorganic phosphorus (DIP) showed a significant negative correlation with total water depth, implying that regeneration around the sea floor was an important source of DIP. Surface DIN and DIP showed positive correlations with surface primary production (PP) and water column primary productivity (ΣPP*), respectively. The combined correlation and model analyses indicate that total water depth had an ambivalent influence on water column primary production (ΣPP); shallower water depth induced more active regeneration of nutrients, but it also caused higher turbidity and lower light availability as a result of enhanced resuspension of sediments. Furthermore, there was a vertical constraint for phytoplankton during the rainy season: total water depth tended to be shallower than euphotic zone depth. In conclusion, light limitation and vertical constraint owing to shallow water depth appear to be more important than nutrient limitation for water column primary production in Bandon Bay.     

Large ageostrophic currents in the abyssal layer southeast of Kyushu, Japan, by direct measurement of LADCP

With full-depth LADCP velocity data collected in a wide area southeast of Kyushu, Japan, large velocity currents, occasionally exceeding 15 cm s^?1, were observed in a thick, 500–1,500 m, near-homogeneous density layer below approximately 3,000 m depth around the steep topographies. The currents were found not to flow along the topographic contours, and to be strongly ageostrophic. The directions of the bottom-layer currents are rather related with phase of the semi-diurnal tides, suggesting deeply intruded internal tides generated at the steep topographies.     

An eddy-driven abyssal circulation in a bowl-shaped basin due to deep water formation

Numerical experiments were performed to investigate the effects of eddies generated in deep water formation processes on an abyssal circulation in a closed bowl-shaped basin. Two sets of experiments were performed. One set was eddy-restricted experiments in which only a volume-driven (upwelling-driven) circulation was simulated and the other set was eddy-permitted experiments in which both a volume-driven circulation and an eddy-driven circulation were simulated. In the two layer experiment where the lower layer water is formed, a mean along-slope current is formed in the lower layer for both the eddy-restricted and eddy-permitted experiments. The direction of the current was not unique in the eddy-restricted experiment, but it was cyclonic in the eddy-permitted experiment. In the three layer experiments where water of the intermediate layer is formed, the mean along-slope current in the lowest layer is negligibly small in the eddy-restricted experiment, while it is large and cyclonic in the eddy-permitted experiment. The driving forcings of the eddy-driven circulation are quantified in terms of eddy fluxes of relative vorticity (Reynolds stress) and layer thickness (bolus velocity). These terms increase as the volume of the newly formed water increases, but they do not change greatly with the slope height. The magnitude of these terms changes with the slope width, but the sum of these terms does not vary greatly. As a result, the intensity of the eddy-driven circulation depends primarily on the volume of newly formed water. These dependences of eddy fluxes were interpreted using downgradient diffusion of potential vorticity.     

Evolution processes of Ordovician–Devonian arc system in the South‐Kitakami Massif and its relevance to the Ordovician ophiolite pulse

The South Kitakami Massif is one of the oldest geological domains in Japan having Silurian strata with acidic pyroclastic rocks and Ordovician–Silurian granodiorite–tonalite basement, suggesting that it was matured enough to develop acidic volcanisms in the Silurian period. On the northern and western margin of the South Kitakami Massif, an Ordovician arc ophiolite (Hayachine–Miyamori Ophiolite) and high‐pressure and low‐temperature metamorphic rocks (Motai metamorphic rocks) exhumed sometime in the Ordovician–Devonian periods are distributed. Chronological, geological, and petrochemical studies on the Hayachine–Miyamori Ophiolite, Motai metamorphic rocks, and other early Paleozoic geological units of the South Kitakami Massif are reviewed for reconstruction of the South Kitakami arc system during Ordovician to Devonian times with supplementary new data. The reconstruction suggests a change in the convergence polarity from eastward‐ to westward‐dipping subduction sometime before the Late Devonian period. The Hayachine–Miyamori Ophiolite was developed above the eastward‐dipping subduction through three distinctive stages. Two separate stages of overriding plate extension inducing decompressional melting with minor involvement of slab‐derived fluid occurred before and after a stage of melting under strong influence of slab‐derived fluids. The first overriding plate extension took place in the back‐arc side forming a back‐arc basin. The second one took place immediately before the ophiolite exhumation and near the fore‐arc region. We postulate that the second decompressional melting was triggered by slab breakoff, which was preceded by slab rollback inducing trench‐parallel wedge mantle flow and non‐steady fluid and heat transport leaving exceptionally hydrous residual mantle. The formation history of the Hayachine–Miyamori Ophiolite implies that weaker plate coupling may provide preferential conditions for exhumation of very hydrous mantle. Very hydrous peridotites involved in arc magmatism have not yet been discovered except for in the Cambrian–Ordovician periods, suggesting its implications for global geodynamics, such as the thermal state and water circulation in the mantle.     

Mixing of magmatic CO2 into volcano groundwater flow at Aso volcano assessed combining carbon and water stable isotopes

To understand deep groundwater flow systems and their interaction with CO₂ emanated from magma at depth in a volcanic edifice, deep groundwater samples were collected from hot spring wells in the Aso volcanic area for hydrogen, oxygen and carbon isotope analyses and measurements of the stable carbon isotope ratios and concentrations of dissolved inorganic carbon (DIC). Relations between the stable carbon isotope ratio (δ¹³C_DIC) and DIC concentrations of the sampled waters show that magma-derived CO₂ mixed into the deep groundwater. Furthermore, groundwaters of deeper areas, except samples from fumarolic areas, show higher δ¹³C_DIC values. The waters' stable hydrogen and oxygen isotope ratios (δD and δ¹⁸O) reflect the meteoric-water origin of that region's deep groundwater. A negative correlation was found between the altitude of the well bottom and the altitude of groundwater recharge as calculated using the equation of the recharge-water line and δD value. This applies especially in the Aso-dani area, where deeper groundwater correlates with higher recharge. Groundwater recharged at high altitude has higher δ¹³C_DIC of than groundwater recharged at low altitude, strongly suggesting that magmatic CO₂ is present to a much greater degree in deeper groundwater. These results indicate that magmatic CO₂ mixes into deeper groundwater flowing nearer the magma conduit or chamber.     

Magmatic unmixing in spinel from late Precambrian concentrically-zoned mafic–ultramafic intrusions, Eastern Desert, Egypt

Spinel is widespread in the ultramafic core rocks of zoned late Precambrian mafic–ultramafic complexes from the Eastern Desert of Egypt. These complexes; Gabbro Akarem, Genina Gharbia and Abu Hamamid are Precambrian analogues of Alaskan-type complexes, they are not metamorphosed although weakly altered. Each intrusion is composed of a predotite core enveloped by pyroxenites and gabbros at the margin. Silicate mineralogy and chemistry suggest formation by crystal fractionation from a hydrous magma. Relatively high Cr₂O₃ contents are recorded in pyroxenes (up to 1.1 wt.%) and amphiboles (up to 1.4 wt.%) from the three plutons. The chrome spinel crystallized at different stages of melt evolution; as early cumulus inclusions in olivine, inclusions in pyroxenes and amphiboles and late-magmatic intercumulus phase. The intercumulus chrome spinel is homogenous with narrow-range of chemical composition, mainly Fe³⁺-rich spinel. Spinel inclusions in clinopyroxene and amphibole reveal a wide range of Al (27–44 wt.% Al₂O₃) and Mg (6–13 wt.% MgO) contents and are commonly zoned. The different chemistries of those spinels reflect various stages of melt evolution and re-equilibration with the host minerals. The early cumulus chrome spinel reveals a complex unmixing structures and compositions. Three types of unmixed spinels are recognized; crystallographically oriented, irregular and complete separation. Unmixing products are Al-rich (Type I) and Fe³⁺-rich (Type II) spinels with an extensive solid solution between the two end members. The compositions of the unmixed spinels define a miscibility gap with respect to Cr–Al–Fe³⁺, extending from the Fe³⁺–Al join towards the Cr corner. Spinel unmixing occurs in response to cooling and the increase in oxidation state. The chemistry and grain size of the initial spinel and the cooling rate control the type of unmixing and the chemistry of the final products. Causes of spinel unmixing during late-magmatic stage are analogous to those in metamorphosed complexes. The chemistry of the unmixed spinels is completely different from the initial spinel composition and is not useful in petrogenetic interpretations. Spinels from oxidized magmas are likely to re-equilibrate during cooling and are not good tools for genetic considerations.     

Seismic behaviour of pile groups by hybrid experiments

Non-linear seismic soil-pile interaction was studied with a hybrid procedure that used a pseudo-dynamic testing (PDT) method modified to account for frequency dependence and developed for foundation-soil systems. The numerical scheme used in the conventional PDT was improved by the introduction of a time-dependent pseudo-forcing function derived from the frequency-dependent dynamic characteristics of the system by Hilbert transformation in the frequency domain. Single, 2-, 3- and 9-pile group foundation models were used, their mechanical characteristics later being determined from static and forced vibration dynamic tests. Amplitude scaling was used for three recorded accelerograms. Data recorded during an earthquake at the site of the experiments revealed that the proposed methodology predicts well seismic nonlinear interaction and accounts for frequency dependence and non-linearity in the time domain.     

Hybrid experiments on non-linear earthquake-induced soil-structure interaction

Non-linear seismic soil-structure interaction is studied through a hybrid procedure using the pseudo-dynamic testing (PDT) method which is modified to take into account frequency dependence and developed for foundation-soil systems. The numerical scheme used in conventional PDT is improved by introduction of a time-dependent pseudo-forcing function which is derived from frequency-dependent dynamic characteristics of the system by means of Hilbert transformation in the frequency domain. Surface, shallow and caisson foundation models that differed in size and depth of embedment were used. The mechanical characteristics of the systems were determined from static and forced vibration dynamic tests. An amplitude scaling technique was used for three recorded accelerograms.