Small inflation sources producing seismic and infrasonic pulses during the 2000 eruptions of Miyake-jima, Japan

During the 2000 activity of Miyake-jima volcano, Japan, we detected long period seismic signals with initial pulse widths of 1-2 s, accompanied by infrasonic pulses with almost the same pulse widths. The seismic signals were observed from 13 July 2000, a day before the second summit eruption. The occurrences of the seismic signals were intermittent with a gradual increase in their magnitudes and numbers building toward a significant explosive eruption on 18 August. After the eruption, the seismic and infrasonic events ceased. The results of a waveform inversion show that the initial motions were excited by an isotropic inflation source beneath the south edge of the caldera at a depth of 1.4 km. On the other hand, the sources of the infrasonic pulses were located in the summit caldera area. The times at which the infrasonic pulses were emitted at the surface were delayed by about 3 s from the origin times of the seismic events. It is suggested that small isotropic inflations excited seismic waves in the crust and simultaneously caused acoustic waves that traveled in the conduit and produced infrasonic pulses at the crater bottom. Considering the observed time differences and gas temperatures emitted from the vent, the conduit should have been filled with vapor mixed with SO₂ gas and volcanic ash. The change of the time differences between the seismic and infrasonic signals suggests that the seismic source became shallower within half a day before the August 18 explosive eruption. We interpret the source process as a fragmentation process of magma in which gas bubbles burst and quickly released part of the pressure that had been sustained by the tensional strength of magma.     

Effects of demand estimates on the evaluation and optimality of service centre locations

Public service systems, such as emergency health care, police or fire brigades, are critical for day-to-day functioning of the society. To design and operate these systems efficiently much data needs to be collected and properly utilised. Here, we use the OpenStreetMap (OSM) data to model the demand points (DPs), which approximate the geographical location of customers, and the road network, which is used to access or distribute services. We consider all inhabitants as customers, and therefore to estimate the demand, we use the available population grids. People are changing their location in the course of the day and thus the demand for services is changing accordingly. In this paper, we investigate how the used demand estimate affects the optimal design of a public service system. We calculate and compare efficient designs corresponding to two demand models, a night-time demand model when the majority of inhabitants rest at home and the demand model derived from the 24-hour average of the population density. We propose a simple measure to quantify the differences between population grids and we estimate how the size of differences affects the optimal structure of a public service system. Our analyses reveal that the efficiency of the service system is not only dependent on the placement strategy, but an inappropriate demand model has significant effects when designing a system as well as when evaluating its efficiency.     

Eigen oscillation of a fluid sphere and source mechanism of harmonic volcanic tremor

The eigen oscillation of a fluid sphere embedded in an infinite elastic medium is analyzed to understand the source mechanism of volcanic tremor that vibrates nearly monotonically and attenuates slowly. The dimensionless eigen frequencies of the sinusoidal oscillation are calculated in a complex form with the attenuation factor in its imaginary part for various combinations of the three parameters: the contrasts of P-wave velocity, density and rigidity between the fluid and the country rock. Eigen oscillations consist of a high attenuation mode with a rapidly decaying pulsive wave at a low frequency and infinite number of regular modes with slowly decaying vibrations. For regular modes, the frequency of oscillation obtained from the real part of an eigen value is distributed in approximately regular intervals while the attenuation factor from the imaginary part is almost constant independent of the mode. Each eigen frequency of regular and high attenuation modes is degenerated with two independent eigen functions describing different distributions of displacement, velocity and stress. The theory is applied to harmonic volcanic tremor observed at Kusatsu-Shirane Volcano, central Japan. Observed spectral peaks of the tremor are explained by the eigen frequencies and attenuation factors of several lowest regular modes if the spherical fluid oscillator has a radius of dozens of meters and a P-wave velocity of about several hundred meters per second.     

Mesozoic radiolarians and radiolarian-bearing sequences in the circum-Pacific regions: A report of the symposium-'Radiolarians and Orogenic Belts'

Abstract This paper contains extended abstracts of the seven papers presented at the symposium 'Radiolarians and Orogenic Belts' held at the seventh meeting of the International Association of Radiolarian Paleontologists (INTERRAD). Important results of the symposium include the following: (1) Upper Paleozoic and Mesozoic cherts are widely distributed within accretionary complexes in the circum-Pacific orogenic belt. Radiolarian dating reveals that long durations of chert sedimentation in a pelagic environment are recorded on both sides of Pacific-rim accretionary complexes (e.g. New Zealand, Japan, Russian Far East, Canadian Cordillera). (2) Triassic radiolarian faunas from New Zealand and the Omolon Massif, northeast Siberia are similar in composition and are characterized by the absence of typical Tethyan elements. This suggests that radiolarian faunal provincialism may have been established as early as the Triassic. High-latitude radiolarian taxa exhibit a bi-polar distribution pattern. (3) The Lower Triassic interval in chert dominant pelagic sequences is mechanically weaker than other levels and acted as a décollement in accretionary events. This lithologic. contrast in physical property is considered to reflect radiolarian evolution, such as the end-Permian mass extinction.     

Mineralogical and geochemical study of a newly discovered mafic granulite, northwest China: Implications for tectonic evolution of the Altay Orogenic Belt

Abstract A mafic granulite body was newly discovered in the Altay Orogenic Belt, northwest China. The rocks comprise a suite of coarse‐grained and fine‐grained granulites. Orthopyroxenes (hypersthenes) in the rocks have high X_Mg and low Al₂O₃ contents, whereas clinopyroxenes have low TiO₂ and Al₂O₃ contents. Amphiboles and biotites have a high Mg/(Mg + Fe²⁺) ratio and low contents of F and Cl. The peak metamorphic pressure–temperature (P–T) conditions are estimated as 750–780°C and 6–7 kbar, and retrograde P–T conditions are in the range of 590–620°C and 2.3–3.7 kbar, indicating significant decompression. Metamorphic reactions and P–T estimates define a clockwise P–T path. Geochemically, the rocks are high in Mg/(Mg + Fe) and Al₂O₃, depleted in U, Th, K and Rb, and characterized by light rare earth element enrichment and a weak positive Eu anomaly. The Altay mafic granulite shows depleted Nb, P and Ti contents in the mid‐oceanic ridge basalt normalized spider diagram. The geochemical characteristics suggest that the protolith of the Altay mafic granulite was calc‐alkaline basalt and andesite with an island‐arc affinity. The rock has a high ¹⁴³Nd/¹⁴⁴Nd ratio with ?Nd(0) > 0, indicating derivation from a mantle‐depleted source. In the present study, a two‐stage model for the evolution of the Altay mafic granulite is proposed: an early stage in which calc‐alkaline basalt and andesite with island‐arc affinity were subducted into a deeper level of the crust and subjected to granulite‐facies metamorphism generating the mafic granulite, followed by the later stage exhumation of the system into the upper crust by the late Paleozoic thrusting.     

Lithological and physical properties of core samples from the Sagara oil field: Oil occurrence in Sagara core samples

Abstract   A drilling and coring investigation of the Sagara oil field, central Honshu, Japan, was conducted to contribute to the understanding of hydrocarbon migration processes in a forearc basin. Core samples were analyzed to determine lithology, physical properties (specifically gas permeability) and the characteristics of oil occurrence. Gas permeability values greater than approximately 10⁻¹¹ m² constitute the basic precondition for any lithology to serve as a potential fluid conduit or reservoir in the Sagara oil field. Cores recovered from the 200.6-m-deep borehole were primarily composed of alternating siltstone, sandstone and conglomerate, all of which are correlated to the late Miocene Sagara Group. Both sandstone and conglomerate can be classified into two types, carbonate-cemented and poorly to non-cemented, based on matrix material characteristics. Oil stains are generally absent in the former lithology and more common in the latter. Variations in physical properties with respect to gas permeability values are directly related to the presence and character of carbonate cement, with higher permeabilities common in poorly to non-cemented rocks. The relationships between lithology, oil-staining, cementation and permeability indicate that cementation preceded oil infiltration and that cementation processes exerted significant control on the evolution of the reservoir.     

Effect of hydrostatic pressure on the lattice parameters of Fe2SiO4 olivine up to 70 kbar

The pressure dependence of the three lattice parameters and unit cell volume of fayalite (Fe₂SiO₄ olivine) was determined by X-ray diffraction under hydrostatic pressures up to 70 kbar. In order to eliminate stress inhomogeneity within a composite material consisting of a specimen mixed with an internal-pressure standard, a liquid (1 : 1 mixture of ethanol and methanol) was used as a pressure-transmitting medium. The isothermal bulk modulus calculated on the basis of the second-order Birch-Murnaghan equation of state gives the values K₀ = 1.19 ± 0.10 Mbar and K₀′ = 7 ± 4, and if we assume K₀′ = 5: K₀ = 1.24 ± 0.02 Mbar. Three axes of fayalite were found to be compressible in the following order, b >c >a. Comparisons with the results obtained under non-hydrostatic compression are made.     

A new technique for measuring diffusion coefficients of cations and anions in ionic crystals

A new technique has been developed for measuring the diffusion coefficient in ionic crystals. Based on Einstein's formula expressing the relation between diffusion coefficient and electric mobility, the electrical impedance of a diatomic ionic crystal is derived theoretically as a function of frequency of the applied electric field. In this method, the diffusion coefficients of both cations and anions are determined simultaneously by fitting the measured impedance to the theoretical relation. This method was applied to NaCl single crystals in the temperature range 370–780°C. The impedance was determined over the frequency range 0.01 Hz to 1 kHz, at constant temperature. The diffusion coefficients thus obtained for NaCl agree reasonably well with previous data by means of a radioactive isotope technique. The activation energies for Na⁺ and Cl^? obtained are 1.97±0.03 eV and 2.08±0.06 eV, respectively, in the intrinsic region, and 0.92±0.02 eV and 1.06±0.02 eV in the extrinsic region. It was discovered that there are diffusion blocks of approximately 2 μm width, which obstruct free migration of ions in a single crystal.