船式支护在基坑中的应用

在深厚软土地区的基坑,对基坑底软土进行搅拌加固形成强度较高的底板而保证坑底稳定,侧壁采用支护桩支护保证侧壁的稳定使其不倾倒,支护桩与加固底板两者共同作用形成的船状结构支护体系类似轮船的船侧壁及船底板,以保证基坑的稳定。结合具体的工程实例,介绍了船式支护的侧壁及底板的设计方法。工程案例成功实施,监测结果表明,船式支护既可避免支护桩嵌固深度过长,又利于软土的土方施工及工程桩的保护,是安全可靠的,对类似工程有一定的参考意义。     

Slip-weakening constitutive relation and the structure in the vicinity of a shear crack tip

Shear-crack model with a cohesive zone (or breakdown zone) is appropriate for the analysis of a fault surface in which slip distribution is strongly nonuniform. As the slipped portion advances, slip-weakening occurs over the so-called cohesive zone, a distance behind the fault tip. For a prescribed strength vs. displacement constitutive relation, however, the zone structure is difficult to determine by an analytical method except for some simple cases, thus it often requires a certain numerical procedure. This work proposes a numerical procedure to obtain approximated solutions of the problem by combining a series of elastic solutions derived bySmith (1974). The series is linearly combined and the unknown coefficients are determined by a nonlinear least square method. This method can fit a wide range of prescribed strength vs. displacement relations which may be simple algebraic relations or curves obtained by laboratory tests. By examining the residual errors and in comparison with a derived result in which linear stress is assumed within the zone, it could be concluded that the results provide good accuracy. Moreover, because the results are written in formulae, they can be easily referred to or used. By fitting constitutive curves in many different shapes, it is found that the stress distribution within the zone is more sensitive to the constitutive curve shape than the displacement. The most interesting fact is that the zone size is not sensitive to the curve shape, i.e., the zone size can be estimated by $$R = 3\mu \zeta \upsilon _c /\{ 2(1 - \upsilon )(\tau _c - \tau _f )\}$$ with ζ=1±0.11 for most cases.     

Oil-generation kinetics for organic facies with Type-II and -IIS kerogen in the Menilite Shales of the Polish Carpathians

The Menilite Shales (Oligocene) of the Polish Carpathians are the source of low-sulfur oils in the thrust belt and some high-sulfur oils in the Carpathian Foredeep. These oil occurrences indicate that the high-sulfur oils in the Foredeep were generated and expelled before major thrusting and the low-sulfur oils in the thrust belt were generated and expelled during or after major thrusting. Two distinct organic facies have been observed in the Menilite Shales. One organic facies has a high clastic sediment input and contains Type-II kerogen. The other organic facies has a lower clastic sediment input and contains Type-IIS kerogen. Representative samples of both organic facies were used to determine kinetic parameters for immiscible oil generation by isothermal hydrous pyrolysis and S₂ generation by non-isothermal open-system pyrolysis. The derived kinetic parameters showed that timing of S₂ generation was not as different between the Type-IIS and -II kerogen based on open-system pyrolysis as compared with immiscible oil generation based on hydrous pyrolysis. Applying these kinetic parameters to a burial history in the Skole unit showed that some expelled oil would have been generated from the organic facies with Type-IIS kerogen before major thrusting with the hydrous-pyrolysis kinetic parameters but not with the open-system pyrolysis kinetic parameters. The inability of open-system pyrolysis to determine earlier petroleum generation from Type-IIS kerogen is attributed to the large polar-rich bitumen component in S₂ generation, rapid loss of sulfur free-radical initiators in the open system, and diminished radical selectivity and rate constant differences at higher temperatures. Hydrous-pyrolysis kinetic parameters are determined in the presence of water at lower temperatures in a closed system, which allows differentiation of bitumen and oil generation, interaction of free-radical initiators, greater radical selectivity, and more distinguishable rate constants as would occur during natural maturation. Kinetic parameters derived from hydrous pyrolysis show good correlations with one another (compensation effect) and kerogen organic-sulfur contents. These correlations allow for indirect determination of hydrous-pyrolysis kinetic parameters on the basis of the organic-sulfur mole fraction of an immature Type-II or -IIS kerogen.     

Strength and stability of frictional sliding of gabbro gouge at elevated temperatures

To investigate the strength of frictional sliding and stability of mafic lower crust, we conducted experiments on oven-dried gabbro gouge of 1 mm thick sandwiched between country rock pieces (with gouge inclined 35° to the sample axis) at slip rates of 1.22 × 10^− 3 mm/s and 1.22 × 10^− 4 mm/s and elevated temperatures up to 615 °C. Special attention has been paid to whether transition from velocity weakening to velocity strengthening occurs due to the elevation of temperature.Two series of experiments were conducted with normal stresses of 200 MPa and 300 MPa, respectively. For both normal stresses, the friction strengths are comparable at least up to 510 °C, with no significant weakening effect of increasing temperature. Comparison of our results with Byerlee's rule on a strike slip fault with a specific temperature profile in the Zhangbei region of North China shows that the strength given by experiments are around that given by Byerlee's rule and a little greater in the high temperature range.At 200 MPa normal stress, the steady-state rate dependence a − b shows only positive values, probably still in the “run-in” process where velocity strengthening is a common feature. With a normal stress of 300 MPa, the values of steady-state rate dependence decreases systematically with increasing temperature, and stick-slip occurred at 615 °C. Considering the limited displacement, limited normal stress applied and the effect of normal stress for the temperatures above 420 °C, it is inferred here that velocity weakening may be the typical behaviour at higher normal stress for temperature above 420 °C and at least up to 615 °C, which covers most of the temperature range in the lower crust of geologically stable continental interior. For a dry mafic lower crust in cool continental interiors where frictional sliding prevails over plastic flow, unstable slip nucleation may occur to generate earthquakes.     

T -distributed Random Fields: A Parametric Model for Heavy-tailedWell-log Data1

Histograms of observations from spatial phenomena are often found to be more heavy-tailed than Gaussian distributions, which makes the Gaussian random field model unsuited. A T-distributed random field model with heavy-tailed marginal probability density functions is defined. The model is a generalization of the familiar Student-T distribution, and it may be given a Bayesian interpretation. The increased variability appears cross-realizations, contrary to in-realizations, since all realizations are Gaussian-like with varying variance between realizations. The T-distributed random field model is analytically tractable and the conditional model is developed, which provides algorithms for conditional simulation and prediction, so-called T-kriging. The model compares favourably with most previously defined random field models. The Gaussian random field model appears as a special, limiting case of the T-distributed random field model. The model is particularly useful whenever multiple, sparsely sampled realizations of the random field are available, and is clearly favourable to the Gaussian model in this case. The properties of the T-distributed random field model is demonstrated on well log observations from the Gullfaks field in the North Sea. The predictions correspond to traditional kriging predictions, while the associated prediction variances are more representative, as they are layer specific and include uncertainty caused by using variance estimates.     

Vertical distribution and water solubility of phosphorus and heavy metals in sediments of the St. Lucie Estuary, South Florida, USA

Accumulation and distribution of heavy metals and phosphorus in sediments impact water quality. There has been an increasing concern regarding fish health in the St. Lucie Estuary, which is related to increased inputs of nutrients and metals in recent decades. To investigate vertical changes of contaminants (P, Cd, Cr, Co, Cu, Ni, Pb, Zn, and Mn) in sediments of the St. Lucie Estuary in South Florida, 117 layer samples from six of the 210 to 420 cm depth cores were analyzed for their total and water-soluble P and heavy metals, clay, total Fe, Al, K, Ca, Mg, Na, and pH. Principal component analysis (PCA) was used in two sets of analytical data (total and water-soluble contaminant concentrations) to document changes of contaminants in each core of sediments. The PCA of total contaminants and minerals resulted in two factors (principal components). The first and second factors accounted for 61.7 and 17.2 % of the total variation in all variables, and contrast indicators associated with contaminants of P, Cd, Co, Cr, Ni, Pb, Zn, and Mn and accumulation of Fe and Al oxides, respectively. The first factor could be used for overall assessment of P and heavy metal contamination, and was higher in the upper 45–90 cm than the lower depths of each core. The concentrations of P and heavy metals in the surface layers of sediments significantly increased, as compared with those in the sediments deeper than 45–90 cm. The PCA of water-soluble contaminants developed two factors. The second factor (Cu–P) was higher in the upper than the lower depths of the sediment, whereas the highest score of the first factor (Cd–Co–Cr–Ni–Pb–Zn–Mn) occurred below 100 cm. The water-soluble Cu and P concentrations were mainly dependent on their total concentrations in the sediments, whereas the water-soluble Cd, Co, Cr, Ni, Pb, Zn, and Mn concentrations were mainly controlled by pH.     

吉林伊通盆地莫里青断陷古近系双阳组储集层成岩作用研究

古近系双阳组是在吉林省伊通盆地莫里青断陷中，油气赋存的主要层位,储层主要为湖底扇和扇三角洲的砂体。依据双阳组储层的大量薄片、扫描电镜、粘土矿物分析的资料研究了该储集层的成岩作用。研究结果表明双阳组储集层：成岩作用经历了压实、压溶、胶结、交代和溶解6方面的作用。双储集层中的自生粘土矿物蒙皂石向伊利石转化具有明显的特征：主要演化过程经历了蒙皂石渐变带，第一迅速转化带和第二迅速转化带，相应的成岩作用阶段可划分为早成岩阶段B期、晚成岩阶段A1期和晚成岩阶段A2期。依据在垂向上的成岩变化,建立了莫里青断陷双阳组储集层的成岩作用演化序列。在垂向上成岩作用的类型和强度均存在明显的差异，造成了储层物性的垂向分带。     

龙永煤田危机矿山资源接替的几种勘探模式

通过龙永煤田现有煤矿状况调查分析发现：许多矿井已步入“花甲之年”，接近矿井服务年限。为了保障我省能源安全，应当采用有效勘探方法，方能使它们“返老还童”。研究发现危机矿山延长服务年限的几种勘探模式是：其一为扩大（延伸）勘探模式；其二为小型井田（块段）勘探模式；其三为资料分析研究模式。经探采对比发现，采用这三种勘探模式后，产生了巨大的经济效益，使一大批老矿井青春再度焕发。     

REE characteristics of the Fanshan alunite deposit in Zhejiang Province, China

1 Introduction Alunite [KAl3(SO4)2(OH)6] is a very important non-ferrous metal resource, so many countries throughout the world have made great investments in research on the mechanism of its formation, its geological characteristics and applications. O…