蚌埠五河地区金矿床成矿物质来源及其年代学研究——以河口和荣渡金矿床为例

安徽省蚌埠五河地区河口和荣渡金矿床是华北地台东南缘蚌埠台隆和五河台坳邻接区域的两个金矿床。本文通过对比研究河口和荣渡金矿床的地质特征、流体包裹体地球化学、Re-Os同位素以及H-O-S同位素特征,来厘定其形成时代、探讨其成矿物质来源和成矿过程。河口及荣渡金矿床矿体主要呈细脉浸染状、脉状和网脉状赋存于古太古代西堌堆地层中,成矿过程可划分为4个阶段:(1)石英脉阶段(早阶段);(2)石英-黄铁矿阶段(早阶段);(3)石英-多金属硫化物阶段(中阶段);(4)碳酸盐阶段(晚阶段);其中,中阶段为金的主要矿化时期。河口和荣渡金矿床早阶段(石英脉和石英-黄铁矿阶段)的石英内发育富液两相包裹体(WL型)、富气两相包裹体(WG)以及少量的含子晶的气液固三相包裹体(S型),均一温度为322～412℃,盐度介于5. 56%～15. 67%NaCleqv之间,属于高温中低盐度流体体系;中阶段(石英-多金属硫化物脉阶段)石英内发育有富液两相包裹体(WL型)、富气两相包裹体(WG),均一温度为257～357℃,盐度介于3. 06%～7. 45%NaCleqv之间,属于中高温低盐度流体体系。从成矿早阶段到主成矿阶段流体的盐度和温度都发生了较大程度的降低,推测矿化过程可能是由流体温度和盐度的降低引起的。成矿阶段石英中流体水的δ~(18)O值介于5. 01‰～7. 90‰之间,δD_(V-SMOW)值介于-89‰～-65‰之间,表明两个矿床的成矿流体为主要为岩浆水。河口金矿床矿石中的黄铁矿δ~(34)S值介于3. 89‰～9. 65‰之间,荣渡金矿床方铅矿δ~(34)S值为0. 76‰,表明河口及荣渡金矿床δ~(34)S值具有岩浆硫的特征,后期由于岩浆去气作用或地层硫的参与使矿石中的δ~(34)S值升高。因此,这两个金矿床可能是与岩浆热液有关的热液石英脉型金矿床。对荣渡金矿床矿石的黄铁矿进行Re-Os同位素定年,确定金矿床形成于134±19Ma,结合前人对该地区所做的岩浆岩定年工作,推测荣渡金矿床的成矿可能与区内130Ma左右的岩浆活动密切相关。     

CYS-300型全液压地热水井钻机的研制

本文介绍了CYS300型全液压地热水井钻机的性能参数、关键机械部件结构及液压系统的设计。钻机选用齿轮泵作为液压系统动力元件,配合液压多路阀实现对动力头双液压马达和给进油缸等执行元件液压油的合流,通过液控二速阀实现动力头双液压马达的串并联工作,输出4种转速和扭矩,在满足钻机性能参数设计要求的同时,简化液压系统的设计,减少液压系统能量损耗,降低维护和使用成本。钻机采用油缸三链条倍速机构实现动力头的给进提升,具有结构简单、性能可靠、抗冲击能力强、提升平稳等优点。现场工程施工应用表明：CYS300型全液压地热水井钻机性能稳定可靠,工艺和复杂地层适用能力强,操作安全舒适,钻进效率高。     

基坑全过程开挖及邻近地铁隧道变形实测分析

根据邻近已运营地铁隧道的基坑工程监测数据,对基坑开挖全阶段施工过程的深层土体侧向位移与邻近地铁隧道变形之间的规律展开研究,探讨基坑开挖的施工危险节点与重点影响区域。研究发现,基坑开挖前期围护结构施工和降水均对地层和邻近地铁产生了不容忽视的初始位移影响,围护结构长时间无支撑暴露是基坑侧移快速增长的危险时段;基坑开挖具有空间效应,中部侧向变形要大于边角,且单向开挖易造成后挖区土体的位移场和应力场叠加,引起邻近隧道的最大变形向后挖区偏移;基坑开挖深度与邻近地铁埋深相近时,隧道结构产生显著的水平位移和“横鸭蛋”式收敛变形,竖向位移波动不大;深层土体侧移曲线表现为“阶梯鼓肚形”,土体最大水平位移与隧道变形在小范围内呈线性关系,但随着侧移量的增大,隧道变形发生偏离拟合曲线的超线性增长,在工程中应值得关注。     

中更新世转型时期南海北部上层水体结构演化特征——ODP1146站浮游有孔虫稳定同位素记录

文章以南海北部ODP1146站沉积物岩芯为研究材料,利用浮游有孔虫次表层水种Pulleniatina obliquiloculata壳体的氧、碳稳定同位素,结合该站位浮游及底栖有孔虫氧碳同位素数据,分析中更新世以来南海北部上层水体结构的演化。1.2 Ma以来ODP1146站P.obliquiloculata壳体δ^18O的变化可分3个阶段:1)1.2~0.9 Ma,冰期-间冰期变化幅度较小、主导周期为41 ka斜率周期;2)0.9~0.6 Ma,冰期旋回变化幅度逐渐增强、100 ka偏心率周期开始强化;3)0.6 Ma以来,冰期旋回呈现稳定且幅度较大的100 ka周期变化。0.9 Ma以来南海北部上层海水δ^18O的冰期旋回变幅增强,可能反映东亚冬季风在0.9 Ma之后显著强化。其中,表层水体δ^18O只在冰期变幅增强,P.obliquiloculata所反映的次表层水体δ^18O的变化幅度在冰期和间冰期都显著增强。约0.9 Ma浮游和底栖有孔虫δ^18O的100 ka周期几乎同时显现;但在0.9~0.6 Ma时期P.obliquiloculata的δ^18O偏心率周期更为显著、斜率周期的强度也更高。因此,冰期旋回周期转型及幅度变化两方面的证据共同反映温跃层结构演化在南海北部中更新世转型(MPT)气候转变过程中的特殊性。1.2 Ma以来ODP1146站P.obliquiloculata的δ^13C在0.02 Ma、0.49 Ma和0.99 Ma左右呈明显的碳重值,同时表层种-次表层种之间的δ^13C差值减小到近于0,可以解读为碳重值事件期间南海北部生产力相对减弱。     

元素地球化学揭示的长江中游鄱阳湖地区中更新世以来粉尘堆积的物源特征及其环境意义

位于长江中游的鄱阳湖地区深受东亚季风影响,因其特殊的地理、地貌与水文、水系特征,自中更新世以来随着冬季风的加强,在大姑组、九江组砾石层之上风成堆积广泛发育。该区域中、上更新统表现为网纹红土、均质红土和下蜀黄土的独特沉积序列,厘清这三套独特沉积序列的物质来源对于我们认识东亚季风演化及其区域环境响应至关重要。本文选择了长江中游鄱阳湖地区10个典型剖面,基于<20μm颗粒组分的元素地球化学特征,研究了该地区中、上更新统粉尘堆积的特点,并将其与黄土高原西峰黄土和东秦岭黄土做了对比分析。研究认为,长江中游鄱阳湖地区这套独特的沉积序列,元素特征基本相似,具有贫Co、Pb,富Zr、Hf,低Eu/Eu^*(0.53~0.62)、LaN/YbN(4~8)、Ta/Zr(0~0.006)、Nb/Zr(0~0.09),高Y/Ho(28~30)、Zr/Hf(36~48)等特点,与黄土高原与东秦岭黄土有显著区别。基于Hf-Th-Co、Th-Sc-Zr/10和Th-Sc-La蜘蛛图投影分析,鄱阳湖地区第四纪粉尘物质的源岩接近于石英岩类,为被动大陆边缘构造背景下的产物,显著区别于黄土高原与东秦岭黄土(源岩接近于页岩,形成于大陆岛弧构造背景)。进一步分析认为,网纹红土、均质红土的母质均与区域下蜀黄土类似,推测它们均来自于其冬季风上风方向的长江或赣江的古河谷漫滩,这套独特的沉积序列是第四纪以来长江中游现代格局的水系贯通后,冬季风增强,吹蚀大江大河广阔的古河谷漫滩而形成的区域粉尘堆积的结果;是湿热的亚热带季风区对于中更新世以来在轨道尺度上冬夏季风均加强的背景下独特的区域响应。     

湖南宝山铜铅锌多金属矿床控矿构造特征研究

宝山铜铅锌多金属矿床位于南岭成矿带中段北缘,分为中区的矽卡岩型铜钼矿、外围的热液型铅锌银矿床,具有明显的水平矿化分带性,矿体受构造控制。通过野外工作及室内综合研究认为,宝山铜铅锌多金属矿床的形成具有多期性。矽卡岩形成时期的控矿构造为F₀断层,金属硫化物形成时期的控矿构造为F₂₁与F₂₅断层。F₀、F₂₁、F₂₅断层为含矿热液运移的主要通道,倒转背斜、向斜构造则为含矿热液的富集成矿提供了良好的空间。     

Basaltic and Solution Reference Materials for Iron,Copper and Zinc Isotope Measurements

Iron, Cu and Zn stable isotope systems are applied in constraining a variety of geochemical and environmental processes. Secondary reference materials have been developed by the Institute of Geology, Chinese Academy of Geological Sciences (CAGS), in collaboration with other participating laboratories, comprising three solutions (CAGS‐Fe, CAGS‐Cu and CAGS‐Zn) and one basalt (CAGS‐Basalt). These materials exhibit sufficient homogeneity and stability for application in Fe, Cu and Zn isotopic ratio determinations. Reference values were determined by inter‐laboratory analytical comparisons involving up to eight participating laboratories employing MC‐ICP‐MS techniques, based on the unweighted means of submitted results. Isotopic compositions are reported in per mil notation, based on reference materials IRMM‐014 for Fe, NIST SRM 976 for Cu and IRMM‐3702 for Zn. Respective reference values of CAGS‐Fe, CAGS‐Cu and CAGS‐Zn solutions are as follows: δ⁵⁶Fe = 0.83 ± 0.07 and δ⁵⁷Fe = 1.20 ± 0.13, δ⁶⁵Cu = 0.57 ± 0.06, and δ⁶⁶Zn = ?0.79 ± 0.12 and δ⁶⁸Zn = ?1.65 ± 0.24, respectively. Those of CAGS‐Basalt are δ⁵⁶Fe = 0.15 ± 0.07, δ⁵⁷Fe = 0.22 ± 0.10, δ⁶⁵Cu = 0.12 ± 0.08, δ⁶⁶Zn = 0.17 ± 0.13, and δ⁶⁸Zn = 0.34 ± 0.26 (2s).     

Thermo-mechanical performance of layered transversely isotropic media around a cylindrical/tubular heat source

We develop a new numerical model based on a precise integration method to investigate the coupled thermo-mechanical performance of layered transversely isotropic media around a cylindrical/tubular heat source. To obtain the relational matrices of the extended precise integration method, we first convert the governing equations of the problem into ordinary differential matrix equations through the Laplace–Hankel transform. Then, the cylindrical heat source is divided into a series of plane heat sources, and the plane temperature load term is added to the state vector between layer elements. By combining the layer elements, we build a layered transversely isotropic numerical model containing a cylindrical heat source in the transformed domain. Finally, we solve the model in the transformed domain and obtain the solution of the problem in the real domain through the Laplace–Hankel transform inversion. The accuracy of this method is verified by comparing the solutions with the results of the analytical method and the finite element method. Then, we study the influence of the anisotropy of thermal parameters, the embedded depth, the length/radius ratio, the type of heat source and the stratification of the medium on the thermo-mechanical coupled performance.

     

Crustal structure beneath the central Tien Shan from ambient noise tomography

Through analysis of seismic ambient noise recorded by the GHENGIS array, we constructed a high‐resolution 3‐D crustal shear‐wave velocity model for the central Tien Shan. The obtained shear‐wave velocity model provides insight into the detailed crustal structure beneath the Tien Shan. The results obtained at shallow depths are well correlated with known subsurface geological features. Low velocities are found mainly beneath sedimentary basins, whereas high velocities are mainly associated with mountain ranges. At greater depths of ~43–45 km, high velocities were observed beneath the Tarim Basin and Kazakh Shield; these high velocities extend forward in opposite directions and tilt down towards the central Tien Shan to a depth of in excess of 50 km, most likely reflecting lateral variations in crustal thickness beneath the Tien Shan and surrounding platforms.     

Machine-Learning-Aided Determination of Post-blast Ore Boundary for Controlling Ore Loss and Dilution

Natural Resources Research - In the process of open-pit bench blasting for many mines, rock fragments move in the direction of loose space after fragmentation under explosive energy, leading to ore...