Numerical and simplified methods for the calculation of the total horizontal wave force on a perforated caisson with a top cover

The VOF method and the k–ε model, combined with the equation of state of air at constant temperature, have been used to calculate the total horizontal wave force caused by monochromatic waves acting on a perforated caisson with a top cover. From comparison of various parameters, such as the total horizontal force, the pressure difference on the front wall, the pressure on the back wall and the pressure on the top cover, between the numerical results and test data, it can be seen that the numerical results agree well with the test data. It is concluded that the method described in this paper can be utilized to calculate wave forces acting on perforated caissons with a top cover in the case of nonovertopping, nonbreaking waves. A simplified method to calculate the total horizontal force has been developed, based on test data, using a least-squares method. A comparison between the numerical results and the values calculated from the simplified equations shows good agreement. Therefore the simplified equations can be used in engineering applications to evaluate the total horizontal force on a perforated caisson with a top cover.     

A climatology of mesoscale model simulated low-level wind jets over Cook Inlet and Shelikof Strait, Alaska

Weather in the North Gulf of Alaska is characterized by a high frequency of deep synoptic-scale low-pressure systems, especially during the cold season. The strong pressure gradients of these storms interact with the extremely rugged terrain of the coastal mountains to produce a variety of channeled flows. These surface wind regimes are not well documented in the scientific community, due to the paucity of observations. Modeling of these phenomena in regions of complex terrain is of great interest to those working with hydrodynamic, wave, and pollutant transport models in coastal and shelf areas. Such models, when coupled with ocean and coastal-ecology counterparts, give a broad view of the role surface winds play in shaping local coastal marine ecosystem in this region. This paper presents a climatology of simulated low-level wind jets over the domain of Cook Inlet and Shelikof Strait along Alaska's south-central coast. Daily simulations using the RAMS model were conducted in a 36-h forecast mode for the cold-season period 10/1/03 to 3/31/04. Systematic analysis of the resulting simulated low-level wind field makes it possible to characterize these jets and gap flows in spatial and temporal detail. The comparison between the RAMS winds and the Synthetic Aperture Radar (SAR)-derived winds when available verifies the existence of these wind jets and the capability of the model to simulate these cases. Clearly, the results of a study in this region depend on the fidelity of the model at these scales (O[5 km]). The SAR comparisons attempt to help establish this. From the 6 months of simulations over Cook Inlet and Shelikof Strait, the low-level wind jets are classified into 10 different regimes by location and orientation. These regimes are categorized into four more general groups: cross-channel westerly, easterly, and up and down Inlet flows. The nature of a particular regime is largely a function of pressure gradient orientation and local topography. Jets in the same group have a similar occurrence distribution with time. Some form of jet occurred in the study region almost daily each month of the period, with December 2003 having the highest frequency of wind jets.     

Effects of chemical ecological adjustment and control experiment on phytoplankton community in the Aoshan Bay

There is a low nutrient level in the Aoshan Bay. In June 1999, the chemical adjustmentand control experiment was made in the Aoshan Bay. Following tracts investigation was carried out before the experiment and on the 1st, 2nd, 4th, 5th, 6th and 45th day/after the experiment. While the variance of amount of phytoplankton, the replacement of superior species and the species composition of phytoplankton were researched. The results show that the amount of phytoplankton in the Aoshan Bay rises gradually after the experiment. Ceratium macroceros Cleve of pyrophyta was the dominant species before the experiment, its dominant index was 37.7％. Six days after the experiment, its dominant index dropped to 17.6％ . Meanwhile the dominant index of Asterionella japanics Cleve rose from 7.1％ to 39.2％ , it became the first dominant species. Forty-five days after the experiment, the amount of phytoplankton in the Aoshan Bay was 5.15 to 137.32 times more than that in 1997.     

南海东北部表层沉积中生源和矿物碎屑组分分析及其古环境意义

通过对南海东北部128个表层沉积样品的定量研究，揭示隆源和矿物碎屑各组分的分布，也显示了组分分析作为一种简单、快速的研究方法在海洋古环境研究中的潜力，研究区生源碎屑的分布明显受与水深相关的深海溶解作用所控制，水深3500-4000m的现代南海CCD以下，钙质生物的含量急剧减少，而硅质生物的含量急剧增加，研究区表层沉积中的碎屑矿物主要来源于亚洲大陆，吕宋镐的风化产物只起次要作用，且其分布主要受与离岸距离远近和海流相关的搬运作用所控制。     

科学大洋钻探与深部生物圈

从深海钻探计划(DSDP)在20世纪70年代最早提出海洋沉积物中细菌活动性的证据到90年代大洋钻探计划(ODP)获得了令人信服的海底深部生物的存在证据，并成为即将启动的综合大洋钻探计划(IODP)的一个优先研究领域，深部生物圈成为科学大洋钻探近年来最为重大的发现之一，同时它也将有效地促进地球科学和生物学等其他学科的交叉。     

Numerical simulation of solitary wave scattering by a circular cylinder array

The interaction of a solitary wave with an array of surface-piercing vertical circular cylinders is investigated numerically. The wave motion is modeled by a set of generalized Boussinesq equations. The governing equations are discretized using a finite element method. The numerical model is validated against the experimental data of solitary wave reflection from a vertical wall and solitary wave scattering by a vertical circular cylinder respectively. The predicted wave surface elevation and the wave forces on the cylinder agree well with the experimental data. The numerical model is then employed to study solitary wave scattering by arrays of two circular cylinders and four circular cylinders respectively. The effect of wave direction on the wave forces and the wave runup on the cylinders is quantified.     

Numerical simulation of the hydrodynamic behaviour of submerged plane nets in current

The aim of this paper is to investigate the shape and tension distribution of fishing nets in current. A numerical model is developed, based on lumped mass method to simplify the net. The motion equation is set up for each lumped mass. The Runge–Kutta–Verner fifth-order and sixth-order method is used to solve these simultaneous equations, and then the displacement and tension of each lumped mass are obtained. In order to verify the validity of the numerical method, model tests have been carried out. The results by the numerical simulation agree well with the experimental data.     

新型全封闭刀口联合式管口封的设计及应用

重力活塞取样器是海洋地质调查不可缺少的调查设备，而管口封又是重力活塞取样器的重要部件。管口封的好坏不但影响到取样器的贯入深度和取芯丰，还影响到所取岩芯的质量．介绍了一种最近研制成功的新型全封闭刀口联合式管口封。海上实验在特定海区成功的获取了17．11m的长岩芯，取样率达91．3％，创造了我国海洋地质调查用重力活塞取样器获取岩心的最长记录。该设计已通过国家知识产权局批准授予实用新型专利。     

Resistant performance of perforation of multi-layered targets using an estimation procedure with marine application

Recently, multi-layered targets have become commonplace in both military and civilian applications, such as marine hulls, armored vehicle bodies, outside structures of bulletproof cars, and aerospace vessels. This paper studies the resistant performance of perforation in multi-layered targets. An estimation procedure is established based on the concepts of the conservation of momentum, impulse-momentum law, and conservation of energy. Experimental results of the test of Almohandes et al. are adopted to check the residual velocity of multi-layered targets. The results of the verification are good in terms of agreement for impact velocities ranging from 700 to 800 m/s, when the ratio of the projectile length to the projectile diameter (i.e. L/D) is 4.2, and the average residual velocity error of single, double- or triple-layered targets range approximately from 4.42 to 8.40%. The ballistic performance is best for the double target when the ratio of the first layer thickness to the total thickness (i.e. t₁/(t₁+t₂)) is about 0.75, and the worse performance occurs when the ratio t₁/(t₁+t₂) is 0.5. An air gap slightly influences the resistant performance of perforation in multi-layered targets. These results may serve as a useful reference for designers.