Modeling the seismic response of basin-edge structure by a sequential waveform method

A sequential waveform method is developed to simulate the seismic response of basin-edge structure excited by a plane incident P-wave. The full procedure involves: (a) a previous parameterization of the investigated model using the seismic wave velocities and depths of the sedimentary stratifications; (b) an input motion determined from the records at stations installed on hard rock; (c) forward computation of the P-SV elastic wave field by means of a two-dimensional finite difference (FD) method; (d) the optimization of the model vector using simulated annealing technique and comparing the simulated seismic response of the tested structure with the observed wave field; (e) the correction of the initial model by trial-and-error by testing the differences between synthetics and observed data, and (f) the final solution obtained by iteration using the conjugate gradient algorithm. The search of an optimal basin-edge model has been parallel processed by varying the shapes and velocities of strata on the basis of the fitting of relative timing, amplitude and phase between the output and the observed data. The input motion and sensitivity have been checked and the validity of the method has been demonstrated by numeric analysis. Using the teleseismic records generated by 7 earthquakes recorded at 26 broadband seismic stations, we have studied the seismic velocity structure of the southern edge of the Jiyang depression located in the Bohai Bay basin, northern China. Two cross sections show an agreement between the velocity results and the geological sections available in the region. In addition, we obtain evidence of three hidden faults under the sections and features that suggest major extensions at the Paleogene.     

Food Deserts in the Prairies? Supermarket Accessibility and Neighborhood Need in Edmonton,Canada*

The U.S. and U.K. literatures have discussed “food deserts,” reflecting populated, typically urban, low‐income areas with limited access to full‐service supermarkets. Less is known about supermarket accessibility within Canadian cities. This article uses the minimum distance and coverage methods to determine supermarket accessibility within the city of Edmonton, Canada, with a focus on high‐need and inner‐city neighborhoods. The results show that for 1999 both of these areas generally had higher accessibility than the remainder of the city, but six high‐need neighborhoods had poor supermarket accessibility. We conclude by examining potential reasons for differences in supermarket accessibility between Canadian, U.S., and U.K. cities.     

基于微电子系统（MEMS）加速度地震勘探三分量数字检波器简介

基于微电子机械系统（MEMS）制成的微加速度三分量数字地震检波器。集数据采集、处理及传输功能干一体，在结构模型、工作原理、性能指标控制等方面不同于常规检波器，其信号幅值在低于自然频率范围内没有衰减。因其独特的制造技术，MEMS检波器具有超低噪声，大动态范围和极高的向量保真度性能。     

基于PGNAA技术在线分析系统的应用

近年来,随着核探测与分析技术的日趋成熟,使复杂γ谱的获取、解析达到了在线测量的要求,从而使在线PGNAA(中子活化瞬发γ射线分析)技术获得了飞速的发展。它可对一些工业生产过程中的全物料进行在线测量,其分析精度、可靠性等皆能满足在线元素含量分析的需要,因而显示出巨大的发展潜力和广阔的市场前景。这里介绍了基于PGNAA技术的在线分析系统的基本原理、组成和发展,并概述了它在水泥、煤炭等行业的应用情况。     

法国国家测绘局（IGN）述评

法国是世界测绘强国之一。法国国家测绘局（IGN）是法国测绘的领导机构。本文介绍了IGN的概况，并对IGN大地测量、地图制图、对外服务、研究机构等情况作了较详细的描述。在此基础上对IGN的未来发展特点提出了几点看法。     

MODIS数据在乌鲁木齐地区植被景观动态监测中的应用

根据EOS／MODIS卫星时次高覆盖面广的特征，选取从4．10月的MODIS晴空资料，对整个乌鲁木齐地区植被景观进行动态监测，利用植被指数最大合成法制作了每月植被指数专题图。为了能够结合物候更好地分析乌鲁木齐地区植被随季节变化趋势以及不同时期植被生长状况，我们还制作了植被景观专题图及其变化评价图。评价图的优势在于能直观地反映植被变化的趋势，并能将变化的程度数字化，还可以根据不同的评价图叠加DEM做相应的分析。为乌鲁木齐地区植被变化研究提供有效的依据。     

领导人才资源开发经营的实践与思考

人才资源是第一资源，谁拥有人才优势，谁就能抢占事业发展的制高点，因此，对人才资源开发与经营的效益要远远大于对其他资源开发的效益。对山西省气象局近几年来领导人才资源开发与经营的实践进行了详细的探讨和总结，指出领导人才资源开发与经营的基础环节是造拔优势年轻人才，中介环节是创新人才选拔机制，关键环节是优化配置人才资源。     

用逐步回归预测棉铃虫发生期和发生量

收集了1973年至2000年的气象，农作物、棉铃虫虫害等196年因子，以运城、汾阳和临汾为山西省代表站，利用最优二分割法把发生量分为10级，5级和不分级3种情况；使用逐步回归计算了219个模型，从中选出27个棉铃虫二、三代发生期，发生量最优模型，在农气服务中应用，预报准确率为95％，效果良好。     

阿尔金地区构造应力场及其对金属矿产分布的控制作用

构造应力场研究可以为区域矿产预测提供依据。主要根据节理、擦痕的测试分析，结合区域构造解析，确定阿尔金山东西向拉配泉－－红柳沟构造带经历了三期不同方向的应力作用：印支期以前的南北向挤压作用，印支－燕山期的北西－南东向的挤压和中生代晚期－新生代北东东－南南西向的挤压；并利用有限元数值模拟前两期构造应力场的演变过程，进而讨论了区域构造应力场对内生金属矿产分布规律的控制作用指出了区域寻找大型内生金属矿产的有利地段。     

Origin of a large breccia-vein system in the Sanerlin uranium deposit, southern China: a reinterpretation

The early Tertiary Sanerlin uranium deposit is located near the southwestern margin of the Chaling-Yongxing pull-apart basin defined by the Chaling-Yongxing and Chenxian-Linwu sinistral strike-slip faults in southern China. The uranium ores are hosted in 15 breccia-vein bodies, which are separately located in the cores of three secondary anticlines of the Upper Permian Dangchong Formation. Individual breccia-vein bodies are composed of fragments of silicified shale and sandstone from the Dangchong Formation, and quartz veinlets as cements. These fragments, together with quartz veins, form a mosaic texture. Hydrothermal pitchblende is the only commercial uranium mineral, mainly occurring as disseminated grains within quartz veins or coating fragments. Other metallic minerals include molybdenite, pyrite, chalcopyrite, galena, sphalerite, and red microcrystalline hematite. Fluid inclusions in quartz veins have homogenization temperatures ranging from 150 to 280 °C, and calculated salinity values between 5.6 and 13.4 wt% NaCl equivalent. Stable isotope analyses show that the mineralizing fluid was characterized by '¹⁸O values of -2.2 to +2.6‰ and 'D_H2O values of -134 to -110‰. These analytical data demonstrate that hydrothermal fluids were mainly derived from formation waters (brines) of the Chaling-Yongxing basin. Fluid overpressuring was caused by an abnormal geothermal gradient and impermeable shales in the deposit area. The geometry, texture, and structure of the breccia-vein system, along with the fluid pressure estimates, suggest that hydraulic fracturing generated the mineralized breccia-vein system. Pitchblende and associated minerals were deposited when gaseous phases were released abruptly from the ore fluids due to the hydraulic fracturing.