Variation and temporal patterns in the composition of the surface ichthyoplankton in the southern Bay of Biscay (W. Atlantic)

From September 2000 to December 2006, surface plankton samples were collected on a monthly basis, from a station located in the southern Bay of Biscay (43°37N; 1°43W France), near the deep Capbreton canyon. In this paper, the results for the ichthyoplankton assemblage are presented. Among the 62 taxa recorded, only 35 were present in the larval stage whilst only 10 were represented by their eggs. Taxa represented by both stages (eggs+larvae; N=17) had the highest abundance. The presence in the surface plankton assemblage of species, at either or both stage, is interpreted within the context of the bathymetric distribution of species. The maxima in abundance and diversity occurred in February–March, for eggs, and May–June, for larvae. This 3-month time-lag between the stages is proposed to be related to the timing of egg spawning and larval recruitment to the pelagic environment. Mean egg abundances (82.4±29.8 eggs/10 m²) were 10-fold higher than the larval abundances (7.1±1.8 larvae/10 m²). Despite pronounced monthly variability, no statistically significant decrease in either egg or larvae abundance was observed during this 6-year study period. Compared with previous published studies, this study shows that the peak in ichthyoplankton diversity occurred two months earlier. In addition, the spawning period occurred over the whole year, even during autumn and winter. Using ordination techniques, the annual sequence appearance of taxa are described at the study site: Gadiforms, Ammodytidae and Pleuronectiforms were present during the winter whilst Sparidae, Blennidae, Labridae and Gobiidae, formed the summer group. Only three species, European anchovy Engraulis encrasicolus, European pilchard Sardina pilchardus and Atlantic horse mackerel Trachurus trachurus were recorded throughout the year.     

Sediment transport pattern at the Barra Nova inlet, south Portugal: a conceptual model

The Barra Nova inlet, in south Portugal, is known to migrate progressively southeastwards under wave action. The morphodynamics of this system during a representative year suggests that this long-term evolution is dependent on a seasonal behavior of the tidal inlet which can be described through a three-stage model of post-storm, transition and extended fair-weather conditions. Processes involved in this evolution indicate that the historical migration of the Barra Nova is not dependent on the longshore drift forcing constricting the channel on the updrift coast, but rather on the adjustment of the system to a major erosion of the downdrift coast during short storm events.     

Geomorphologic approach for modelling the surface features of arid environments in a model of dust emissions: application to the Sahara desert

Abstract

Mineral dust emissions from arid regions are influenced by the surface features encountered in the source regions. These surface features control both the erosion threshold and the intensity of the dust flux. Recently, a soil-derived dust emission scheme has been designed in order to provide an explicit representation of the mineral dust accounting for the influence of the surface features on the dust emissions. This physical scheme has been validated with micro-scale field measurements. Its large scale application has required the development of additional relations to estimate the input parameters from more accessible data: the mean height and the covering rate of the roughness elements and the min-eralogical soil type. The determination of these surface data has been based on a geomorphologic approach which describes the surface features of arid areas in a 1 × l° grid. Inside each square degree, up to five different areas characterised by different surface features have been distinguished. However, these areas have not been located inside the square degree. Each area can be constituted by several combined surface features, including roughness, vegetation, granulometry. Five main types of landscapes and eight main types of surface features have been distinguished. This approach is based on the combination of various data, mainly topographical, geological maps and climatological analysis. In addition to the problem of scale transfer, the main constraints to obtain a quantitative assessment are the confidence level of the existing data and the number of parameters to document. On the opposite, with this method, the fine scale required by the dust modelling can be separated from the scale accessible by the mapping approach, of the order of the square degree. This method can also be easily improved by aggregating new data and can be extended to other deserts. An example of application is given for the north-west of the Algerian Sahara where the method has been elaborated. The data provided by the modelling of the surface have been used to simulate dust emissions for 1990, 1991 and 1992 over the central and western Sahara. Over these three years, the mean annual dust emission is about 760 Mt-year^?1 Although a significant interannual variability exists (mainly due to changes in the wind pattern), the most intensive emissions remain quite constant in terms of location. The percentage of agreement with satellite observations higher than 0.7 is 74 %, but only 32 % when using a model having a single threshold function for dust emission (i.e. the same surface feature for the whole Sahara) (cf. later Marticorena et al., 1997). © 2000 Éditions scientifiques et médicales Elsevier SAS     

Rupture behavior and deformation localization of the Kunlunshan earthquake (<Emphasis Type="Italic">M</Emphasis><Subscript><Emphasis Type="Italic">w</Emphasis></Subscript>7.8) and their tectonic implications

Earthquake surface rupture is the result of transformation from crustal elastic strain accumulation to permanent tectonic deformation. The surface rupture zone produced by the 2001 Kunlunshan earthquake (M _w 7.8) on the Kusaihu segment of the Kunlun fault extends over 426 km. It consists of three relatively independent surface rupture sections: the western strike-slip section, the middle transtensional section and the eastern strike-slip section. Hence this implies that the Kunlunshan earthquake is composed of three earthquake rupturing events, i.e. the M _w =6.8, M _w =6.2 and M _w ⩽=7.8 events, respectively. The M _w =7.8 earthquake, along the eastern section, is the main shock of the Kunlunshan earthquake, further decomposed into four rupturing subevents. Field measurements indicate that the width of a single surface break on different sections ranges from several meters to 15 m, with a maximum value of less than 30 m. The width of the surface rupture zone that consists of en echelon breaks depends on its geometric structures, especially the stepover width of the secondary surface rupture zones in en echelon, displaying a basic feature of deformation localization. Consistency between the Quaternary geologic slip rate, the GPS-monitored strain rate and the localization of the surface ruptures of the 2001 Kunlunshan earthquake may indicate that the tectonic deformation between the Bayan Har block and Qilian-Qaidam block in the northern Tibetan Plateau is characterized by strike-slip faulting along the limited width of the Kunlun fault, while the blocks themselves on both sides of the Kunlun fault are characterized by block motion. The localization of earthquake surface rupture zone is of great significance to determine the width of the fault-surface-rupture hazard zone, along which direct destruction will be caused by co-seismic surface rupturing along a strike-slip fault, that should be considered before the major engineering project, residental buildings and life line construction. Supported by the National Natural Science Foundation of China (Grant No. 40474037) and the National Basic Research Program of China (Grant No. 2004CB418401)     

Strontium isotope disequilibrium of plagioclase in the Upper Critical Zone of the Bushveld Complex: evidence for mixing of crystal slurries

We report in situ Sr isotope data for plagioclase of the Bushveld Complex. We found disequilibrium Sr isotopic compositions on several scales, (1) between cores and rims of plagioclase grains in the Merensky pyroxenite, the Bastard anorthosite, and the UG1 unit and its noritic footwall, (2) between cores of different plagioclase grains within thin sections of anorthosite and pyroxenite of the Merensky unit, the footwall anorthosite of the Merensky reef and the footwall norite of the UG1 chromitite. The data are consistent with a model of co-accumulation of cumulus plagioclase grains that had crystallized from different magmas, followed by late-stage overgrowth of the cumulus grains in a residual liquid derived from a different level of the compacting cumulate pile. We propose that the rocks formed through slumping of semi-consolidated crystal slurries at the top of the Critical Zone during subsidence of the center of the intrusion. Slumping led to sorting of crystals based on density differences, resulting in a layered interval of pyroxenites, norites and anorthosites.     

Annual fossil organic carbon delivery due to mechanical and chemical weathering of marly badlands areas

A key issue in the study of the carbon cycle is constraining the stocks and fluxes in and between C‐reservoirs. Among these, the role and importance of fossil organic carbon (FOC) release by weathering of outcropping sedimentary rocks on continental surfaces is still debated and remains poorly constrained. Our work focuses on FOC fluxes due to chemical and mechanical weathering of marls in two experimental watersheds with typical badlands geomorphology (Draix watersheds, Laval and Moulin, Alpes de Haute Provence, France). Organic matter from bedrock, soil litter and riverine particles are characterized by Rock‐Eval 6 pyrolysis. FOC fluxes due to mechanical weathering are then estimated by monitoring the annual particulate solid exports at the outlets of the watersheds (1985–2005 period). FOC fluxes from chemical weathering were calculated using Ca²⁺ concentrations in dissolved loads (year 2002) to assess the amount of FOC released by the dissolution of the carbonate matrix. Results show that FOC delivery is mainly driven by mechanical weathering, with a yield ranging from 30 to 59 t km^‐2 yr^‐1 in the Moulin (0.08 km²) and Laval (0.86 km²) catchments, respectively, (1985–2005 average). The release of FOC attributed to chemical weathering was 2.2 to 4.2 t km^‐2 for the year 2002. These high FOC fluxes from badlands are similar to those observed in tectonically active mountain catchments. At a regional scale, badland outcropping within the Durance watershed does not exceed 0.25% in area of the Rhône catchment, but could annually deliver 12 000 t yr^‐1 of FOC. This flux could correspond to 27% of the total particulate organic carbon (POC) load exported by the Rhône River to the Mediterranean Sea. At a global scale, our findings suggest that erosion of badlands may contribute significantly to the transfer of FOC from continental surfaces to depositional environments. Copyright © 2012 John Wiley & Sons, Ltd.     

Mapping ethnic diversity in highland Northern Vietnam

In this paper we initially present a critical review of a range of ethnological maps produced over the last 130 years for highland northern Vietnam. In particular we illustrate the many difficulties faced when trying to represent mosaics of ethnic highland minority groups on two dimensional maps. Such historical maps included no attempts to bring topographic details into the picture, an idea that would have been virtually impossible anyway, given the cartographic technologies at the time. Yet by not including such details or not representing them clearly, a partial image of these populations has been created that, over time, has become a standardised representation. Therefore, as a more systematic approach to the analysis of these highland minority groups, we present recent attempts to create more functional maps and models for the northern Vietnam province of Lao Cai, using modern cartographic techniques and geographic information systems. Utilising tools such as digital cartography and digital elevation models a wealth of information can be gained which has the potential, amongst other possible uses, to allow for a greater understanding and sensitivity regarding ethnic minority groups in Northern Vietnam, and their use of the local environment. This revised version was published online in July 2006 with corrections to the Cover Date.     

Sur l'assimilation variationnelle de données par un modèle d'écosystème marin de type NPZ

A variational data assimilation method is applied to a simplified marine ecosystem model of NPZ (Nutrient Phytoplankton Zooplankton) type, which implies five parameters. The method allows us to optimise these parameters by an iterative process of minimisation of a cost function which quantifies the quadratic discrepancy between observations and simulation results. The first part of this note describes how to obtain the adjoint model of the NPZ model allowing us to compute the gradient of the cost function relative to the parameters. Two experiments of artificial data assimilation then show the efficiency of this method, but also its limitations because of non-linearities and sensitivity problems of the model relative to the parameters. To cite this article: Y. Leredde et al., C. R. Geoscience 337 (2005).     

Multibody approach for reactive transport modeling in discontinuous-heterogeneous porous media

Computational Geosciences - In the context of long-term degradation of porous media, the coupling between fracture mechanics and reactive transport is investigated. A reactive transport model in a...