三维地震技术在煤层顶板稳定性研究中的应用

龙固井田为全隐蔽的华北型煤田,位于巨野煤田中部,其首采扩大区主采煤层为3号煤层。考虑3煤层顶板稳定性主要受其顶板的构造信息和岩性信息影响,因此首先依据三维地震勘探综合解释成果及波阻抗反演解释成果对二者进行定量化,然后对波阻抗数据进行归一化处理,使得波阻抗数据和量化后的构造数据具有相同的变化范围及等量贡献。在此距离范围内构造和岩性的权值各为0．5,依此生成综合因素煤层顶板稳定性隶属度。分析3煤层顶板以上10m、20m处的综合因素煤层顶板稳定性隶属度图可以发现,该区3煤层顶板稳定性比较好。且其稳定性主要是受构造因素控制,岩性因素相对影响较小。     

DS600和MAX6612在温度传感器中的试验应用

DS600和MAX6612是MAX(美国美信公司)新出的两款模拟温度传感器产品。这两款芯片在性能上各有其优越性,本文主要就其特征、参数、结构、功能等分别进行了研究,并结合实践情况进行了试验和应用。     

SOMATOM AR.C型CT机复位故障检修

本文介绍了由电源故障引起的不可逆转故障,并讨论了维修和故障的排除。     

Planetary boundary layer and surface layer sensitivity to land surface parameters

The sensitivity of the development of the convective planetary boundary layer (PBL) and the surface layer are examined using a coupled surface parameterization and detailed PBL model. First, the coupling is verified against observations from the First ISLSCP (International Satellite Land Surface Climatology Project) Field Experiment (FIFE). Results of the sensitivity experiments indicate that the PBL is most sensitive to the amount of soil water content, and the proximity of the soil water content to critical soil texture values (field capacity and wilting point). While vegetation cover is not the most sensitive parameter at the surface, its influence on the surface energy and hydrologic balance is crucial. Model sensitivity to minimum stomatal resistance, type of soil parameterization and canopy height (surface roughness and displacement depth) is also discussed.     

山东省德州市“中华碘泉”矿泉水的发现与开发

在山东省德州市首次探明国内稀有含碘饮用用天然矿泉水－－“中华碘泉”,研究表明,矿泉水是在新生代断陷盆地的构造背景和弱碱氧化的水文地球化学环境条件下,地下水与含水介南长期水－岩反应中经溶滤形成的,矿泉水水量丰富,水质优良,为含碘水苏打型矿泉水,但氟含量偏讥;为合理开发这一富足资源,可选用电渗析,倾析方法降低氟含量,并将其作为规模化含碘矿泉水生产的技术工艺。     

Oil-generation kinetics for organic facies with Type-II and -IIS kerogen in the Menilite Shales of the Polish Carpathians

The Menilite Shales (Oligocene) of the Polish Carpathians are the source of low-sulfur oils in the thrust belt and some high-sulfur oils in the Carpathian Foredeep. These oil occurrences indicate that the high-sulfur oils in the Foredeep were generated and expelled before major thrusting and the low-sulfur oils in the thrust belt were generated and expelled during or after major thrusting. Two distinct organic facies have been observed in the Menilite Shales. One organic facies has a high clastic sediment input and contains Type-II kerogen. The other organic facies has a lower clastic sediment input and contains Type-IIS kerogen. Representative samples of both organic facies were used to determine kinetic parameters for immiscible oil generation by isothermal hydrous pyrolysis and S₂ generation by non-isothermal open-system pyrolysis. The derived kinetic parameters showed that timing of S₂ generation was not as different between the Type-IIS and -II kerogen based on open-system pyrolysis as compared with immiscible oil generation based on hydrous pyrolysis. Applying these kinetic parameters to a burial history in the Skole unit showed that some expelled oil would have been generated from the organic facies with Type-IIS kerogen before major thrusting with the hydrous-pyrolysis kinetic parameters but not with the open-system pyrolysis kinetic parameters. The inability of open-system pyrolysis to determine earlier petroleum generation from Type-IIS kerogen is attributed to the large polar-rich bitumen component in S₂ generation, rapid loss of sulfur free-radical initiators in the open system, and diminished radical selectivity and rate constant differences at higher temperatures. Hydrous-pyrolysis kinetic parameters are determined in the presence of water at lower temperatures in a closed system, which allows differentiation of bitumen and oil generation, interaction of free-radical initiators, greater radical selectivity, and more distinguishable rate constants as would occur during natural maturation. Kinetic parameters derived from hydrous pyrolysis show good correlations with one another (compensation effect) and kerogen organic-sulfur contents. These correlations allow for indirect determination of hydrous-pyrolysis kinetic parameters on the basis of the organic-sulfur mole fraction of an immature Type-II or -IIS kerogen.     

Are the South and North Liaohe Groups of North China Craton different exotic terranes? Nd isotope constraints

The Liaohe Group is an important Paleoproterozoic stratigraphic unit in the northeastern part of the North China Craton and is traditionally subdivided into the North and South Liaohe Groups. Associated with both the North and South Liaohe Groups are voluminous Paleoproterozoic granitoid rocks, named the Liaoji granitoids. Different tectonic models, including terrane amalgamation, continent–arc collision and rift closure, have been proposed to interpret the tectonic setting and evolution of the North and South Liaohe Groups and associated Liaoji granitoids. At the centre of the controversy between these models is whether or not the North and South Liaohe Groups developed on the same Archean basement. Nd isotopic geochemistry of the Liaoji granitoids provides important constraints on this controversial issue. The Liaoji granitoids associated with the North and South Liaohe Groups display similar ε_Nd values, restricted to a narrow range from 0 to 2, implying that these granitoid rocks were derived from the same or a similar magma source. Moreover, the Liaoji granitoids associated with the North and South Liaohe Groups have similar Nd model ages (T_DM), ranging from 2.4 to 2.6 Ga, suggesting that the protoliths of the Liaoji granitoids associated with both groups may have formed simultaneously, and that the basement rocks underneath the Liaoji granitoids and associated North and South Liaohe Groups belong to the same continental block rather than two different blocks. Combining lithological, structural and geochronological considerations, we interpret the North and South Liaohe Groups as having developed on a single late Archean basement that underwent Paleoproterozoic rifting associated with the intrusion of the Liaoji granitoids and the formation of the Liaohe Group, and closed upon itself in the Paleoproterozoic.     

Production of carbonate and silica nano-particles in stirred bead milling

This paper presents the experimental results of the mechanical production of silica and carbonate colloidal particles below 100 nm using two types of stirred bead mills (i.e., DCP Superflow 12 and PML H/V). It is shown that the stirred bead mill with very small beads can be used as an efficient equipment for the production of the colloidal particles in nanoscale from the feed materials of several microns in sizes at high energy consumptions. The DCP Superflow mill with high power densities is superior for the effective size reduction and production rate, compared to the conventional PML H/V mill with lower power densities. The smaller particles could be produced by the DCP Superflow mill at the same level of high energy inputs as from the PML H/V mill. The “grinding limit” for the processes in the mills has been discussed.     

Water–rock interaction during the process of steam stimulation exploitation of viscous crude oil in Liaohe Shuguang Oil Field, Liaoning, China

In the process of steam stimulation exploitation of viscous crude oil, the injected water, at high temperature and under high pressure, reacts intensively with the host rock. This kind of water–rock interaction in Liaohe Shuguang Oil Field was studied on the basis of analysis of water composition changes, laboratory experiments, mineral saturation indices analysis, and mass balance calculation. Compared with the injected water, the changes of the composition of discharged water are mainly the distinct decrease of pH, Na⁺, SiO₂ and Cl⁻, as well as the increase of K⁺, Ca²⁺, Mg²⁺, SO ₄ ²⁻ and HCO ₃ ⁻ . Laboratory experiments under field conditions showed: the dissolution sequence of minerals quantitatively is quartz>potassium feldspar>albite, and the main change of clay minerals is the conversion of kaolinite to analcime. Mass balance calculation indicated during the process of steam stimulation, large quantities of analcime are precipitated with the dissolution of large amounts of quartz, kaolinite, potassium feldspar, and CO₂. These results correlated very well with the experimental results. The calculated results of Liaohe Shuguang Oil Field showed that during the steam stimulation for viscous crude oil, the amounts of minerals dissolved (precipitated) are huge. To control the clogging of pore spaces of oil reservoirs, increased study of water–rock interaction is needed.     

T -distributed Random Fields: A Parametric Model for Heavy-tailedWell-log Data1

Histograms of observations from spatial phenomena are often found to be more heavy-tailed than Gaussian distributions, which makes the Gaussian random field model unsuited. A T-distributed random field model with heavy-tailed marginal probability density functions is defined. The model is a generalization of the familiar Student-T distribution, and it may be given a Bayesian interpretation. The increased variability appears cross-realizations, contrary to in-realizations, since all realizations are Gaussian-like with varying variance between realizations. The T-distributed random field model is analytically tractable and the conditional model is developed, which provides algorithms for conditional simulation and prediction, so-called T-kriging. The model compares favourably with most previously defined random field models. The Gaussian random field model appears as a special, limiting case of the T-distributed random field model. The model is particularly useful whenever multiple, sparsely sampled realizations of the random field are available, and is clearly favourable to the Gaussian model in this case. The properties of the T-distributed random field model is demonstrated on well log observations from the Gullfaks field in the North Sea. The predictions correspond to traditional kriging predictions, while the associated prediction variances are more representative, as they are layer specific and include uncertainty caused by using variance estimates.