城市大气环境边界层观测试验

城市大气环境边界层观测试验工程提出了城市区域大范围大气污染"空气穹隆"动力过程三维结构,首次揭示出北京周边地形"山谷风"与城市"热岛"效应相互作用对城市大气环境影响的综合特征.试验采用卫星遥感-地面观测相结合的技术方案,揭示北京周边地区污染贡献及其气溶胶远距离输送轨迹特征,提出建立北京及其周边地区点-面结合、卫星遥感-地面观测相结合立体综合监测网的设计新方案.该项目被世界气象组织专家组工作会议评为国际城市大气环境观测优秀示范计划,项目研究成果于2002年作为特邀撰稿发表于美国<环境与健康>(SCI),研究成果在北京市及有关省市推广应用.     

Particle size dependent response of aerosol counters

During an international workshop at the Institute for Experimental Physics of the University of Vienna, Austria, which was coordinated within the Committee on Nucleation and Atmospheric Aerosols (IAMAS-IUGG), 10 instruments for aerosol number concentration measurement were studied, covering a wide range of methods based on various different measuring principles. In order to investigate the detection limits of the instruments considered with respect to particle size, simultaneous number concentration measurements were performed for monodispersed aerosols with particle sizes ranging from 1.5 to 50 nm diameter and various compositions.The instruments considered show quite different response characteristics, apparently related to the different vapors used in the various counters to enlarge the particles to an optically detectable size. A strong dependence of the 50% cutoff diameter on the particle composition in correlation with the type of vapor used in the specific instrument was found. An enhanced detection efficiency for ultrafine hygroscopic sodium chloride aerosols was observed with water operated systems, an analogous trend was found for n-butanol operated systems with nonhygroscopic silver and tungsten oxide particles.     

地震作用下的灰坝液化特征及其动力稳定性分析--以安阳电厂为例

根据安阳电厂灰坝岩土工程性质及其动力学特性,建立了适合灰坝工程的动力分析模型并采用有限元法进行了动力分析.在此基础上,在不同工况条件下对灰坝进行了抗液化安全评价及抗震稳定性分析.研究表明,在不设碎石桩、无排渗体条件下,粉煤灰子坝的抗液化安全系数Ks＜1.25,将发生液化;在设碎石桩、有排渗体条件下,粉煤灰子坝的抗液化安全系数明显提高,Ks≥1.25,不会发生液化.抗震稳定性分析表明,在上述两种工况条件下灰坝是稳定的.     

岷江上游干扰岸坡主要表生地质灾害分布特征及成因浅析

岷江上游地处我国著名的南北向地震带的中段，因其特定的地质环境导致区内表生地质灾害极为严重。通过对岷江上游（汶川以上）河段的崩塌、滑坡、泥石流等表生地质灾害的调查研究，其分布沿岷江两岸具有明显的分段特征与河谷地貌分段基本一致，它们形成发展与特定地形地貌、易崩滑或软弱地层、特殊的构造部位、降雨等密切相关。     

长江三峡工程奉节库岸边坡地下水渗流场模拟分析

长江三峡工程正常蓄水位为175m，在蓄水过程中随着库水位的抬升，必然会引起库岸边坡地下水渗流场的变化。运用3D－Modflow软件模拟了三峡工程的蓄水过程中奉节库段边坡岩土体内部地下水位的动态变化，为长江三峡工程奉节库区段移民迁建地质灾害预测与防治提供科学依据。     

雷达遥感在澜沧江中下游地区锰矿调查评价中的应用

澜沧江吓游地区地处热带-亚热带，植被及第四系覆盖严重，应用雷达遥感技术可以初步揭露植覆盖，利用SAR图像识别主要岩石类型和构造形式，并圈定了主要含锰岩系，进而确定了成锰有利地段。     

基于MAPGIS的军事标图系统的设计

军事领域是一个非常特殊的行业，信息的安全性和空间数据的多样性是应用开发的重要问题。在全球信息化日趋高速发展和逐步成熟的今天，军队信息化建设也必须与GIS技术紧密结合，跟上时代前进的步伐。较系统地研究了GIS技术在军事标图绘制中的应用和集成问题，并提供了相应的理论方法和实现系统。在此基础上介绍了以MAPGIS为开发平台的军事标绘系统的实用功能和特点。首先分析了军事信息系统对地理信息数据的要求，并且评述了相关领域的研究现状。然后较为系统地介绍了军事标图系统的总体设计，根据军事标绘对象的数据特征，设计符合要求的应用系统提出了面向对象和无缝交互工具等的设计思想。对军标对象数据模型和操作模型进行了详细地阐述和说明，并将这些模型在系统中进行了实现。最后介绍了军事标图系统的主要模块和功能，探讨了今后GIS研究和发展的方向。     

A mathematical hysteretic model for elastomeric isolation bearings

An analytical model for high damping elastomeric isolation bearings is presented in this paper. The model is used to describe mathematically the damping force and restoring force of the rubber material and bearing. Ten parameters to be identified from cyclic loading tests are included in the model. The sensitivity of the ten parameters in affecting the model is examined. These ten parameters are functions of a number of influence factors on the elastomer such as the rubber compound, Mullins effect, scragging effect, frequency, temperature and axial load. In this study, however, only the Mullins effect, scragging effect, frequency and temperature are investigated. Both material tests and shaking table tests were performed to validate the proposed model. Based on the comparison between the experimental and the analytical results, it is found that the proposed analytical model is capable of predicting the shear force–displacement hysteresis very accurately for both rubber material and bearing under cyclic loading reversals. The seismic response time histories of the bearing can also be captured, using the proposed analytical model, with a practically acceptable precision. Copyright © 2002 John Wiley & Sons, Ltd.     

Optimal design of passive energy dissipation systems based on H∞ and H2 performances

Passive energy dissipation devices (EDDs), such as viscous dampers, viscoelastic dampers, etc., have been used to effectively reduce the dynamic response of civil infrastructures, such as buildings and bridges, subject to earthquakes and strong winds. The design of these passive energy dissipation devices (EDDs) involves the determination of the optimal locations and the corresponding capacities. In this paper, we present two optimal design methodologies for passive EDDs based on active control theories, including H_∞ and H₂ performances, respectively. The optimal design methodologies presented are capable of determining the optimal locations and the corresponding capacities of EDDs. Emphasis is placed on the application of linear matrix inequality (LMI) for the effective design of passive EDDs using the popular MATLAB toolboxes. One important advantage of the proposed approaches is that the computation of the structural response is not needed in the design process. The proposed optimal design methodologies have been applied to: (i) a 10‐storey building and a 24‐storey building both subject to earthquake excitations, and (ii) a 76‐storey wind‐excited benchmark building, to demonstrate the advantages of the proposed design methodologies over the conventional equal capacity design. Copyright © 2002 John Wiley & Sons, Ltd.     

Parameter identification of inelastic structures under dynamic loads

The generalized model of differential hysteresis contains 13 control parameters with which it can curve‐fit practically any hysteretic trace. Three identification algorithms are developed to estimate the control parameters of hysteresis for different classes of inelastic structures. These algorithms are based upon the simplex, extended Kalman filter, and generalized reduced gradient methods. Novel techniques such as global search and internal constraints are incorporated to facilitate convergence and stability. Effectiveness of the devised algorithms is demonstrated through simulations of two inelastic systems with both pinching and degradation characteristics in their hysteretic traces. Owing to very modest computing requirements, these identification algorithms may become acceptable as a design tool for mapping the hysteretic traces of inelastic structures. Copyright © 2002 John Wiley & Sons, Ltd.