Synchronous structure control of superlarge ore deposits

The control of synchronous structures on formation of superlarge stratabound ore deposits is immense. Based on studies of ore deposits in South Qiniing, northern Guangdong, Langshan and other areas, three new ideas in comparison with examples of ore control of synchronous structures both in China and abroad are proposed: (i) multiorder ore control of synchronous structures, which means that synchronous structures of different orders display different controls on ore deposits; (ii) synchronous structures in different stages of basin evolution display different controls on basin fluid system and ore-forming system; (iii) synchronous strurture accompanying hydrothermal mineralization as a preexisting weak surface in earth crust often reactivate in later tcctono-thermal event to be a channelway for magma or thermal fluids which superimposed on and reformed preexisting ore beds to form large or superlarge composite ore deposits.     

活性炭从硫脲浸出液中回收金的工艺研究

本文研究了在酸性硫脲浸出液中活性炭回收金的工艺过程,实验表明,在该浸出液中活性炭对金具有较高的吸附速度、吸附率和吸附容量并易于解吸,为工业应用提供了可靠的技术依据。     

Metallographic cooling rates and origin of IVA iron meteorites

We have determined the metallographic cooling rates for 13 IVA irons using the most recent and most accurate metallographic cooling rate model. Group IVA irons have cooling rates that vary from 6600 °C/Myr at the low-Ni end of the group to 100 °C/Myr at the high-Ni end of the group. This large cooling rate range is totally incompatible with cooling in a mantled core which should have a uniform cooling rate. Thermal and fractional crystallization models have been used to describe the cooling and solidification of the IVA asteroid. The thermal model indicates that a metallic body of 150 ± 50 km in radius with less than 1 km of silicate on the outside of the body has a range of cooling rates that match the metallographic cooling rates in IVA irons in the temperature range 700-400 °C where the Widmanstätten pattern formed. The fractional crystallization model for Ni with initial S contents between 3 and 9 wt% is consistent with the measured variation of cooling rate with bulk Ni and the thermal model. New models for impacts in the early solar system and the evolution of the primordial asteroid belt allow us to propose that the IVA irons crystallized and cooled in a metallic body that was derived from a differentiated protoplanet during a grazing impact. Other large magmatic iron groups, IIAB, IIIAB, and IVB, also show significant cooling rate ranges and are very likely to share a similar history.     

Porphyry Molybdenum Prospectivity in the Zhongdian Arc,SW China: Use of Singularity and Factor Analyses for Resource Assessment

Natural Resources Research - The Zhongdian arc is an important mineral province in southwest China that hosts significant Cu- and Mo-rich ore deposits. These are mainly present as Late Triassic...     

Petrogenetic and Metallogenetic Background of the Dajing Cu–Sn–Ag–Pb–Zn Ore Deposit, Inner Mongolia, and Characteristics of the Mineralizing Fluid

Abstract: The Dajing Cu–Sn–Ag–Pb–Zn ore deposit, Inner Mongolia of China, is a fissure‐filling hydrothermal ore deposit that occurs within the Upper Permian Linxi group. No magmatic pluton and volcanic rocks outcrop on the surface of the deposit. Most of ore veins show clear‐cut boundary with country rocks. Wallrock alterations that include silicification, carbonation, chlori–tization, and sericitization are generally weak and occur in the close vicinity of ore veins. Mineralization is divided into three stages: (1) cassiterite–arsenopyrite–quartz stage, (2) sulfide stage, and (3) Pb–Zn–Ag–carbonate stage. These mineralization stages have distinct ranges of homogenization temperatures, 290–350C for Stage 1, 260–320C for Stage 2, and 150–250C for Stage 3. However, salinities for Stages 1, 2, and 3 overlap and range between 2.2 and 10.4 wt % NaCl equivalent. The dD values relative to V‐SMOW of inclusion water from quartz are lower than –88% and centered at –100 to –130%. The δ³⁴S values relative to CDT of sulfide ore minerals and δ¹³C values relative to PDB of carbonate gangue minerals, vary from –0.3 to +2.6%, and from –7.0 to –2.9%, respectively. Integrated isotopic data point to two major contributions to the mineralizing fluid that include a dominant meteoric‐derived water and the other from hypogene magma for sulfur and carbon species. Analyses of inclusion gas and liquid compositions are performed. The H₂O and CO₂ are the two most abundant gaseous components, whereas SO₄^2‐ and Cl^‐, and Na⁺, Ca²⁺, and K⁺ are the major anions and cations, respectively. A linear trend is shown on the gaseous H₂O versus CO₂ plot. Phase separation is excluded as cause for the trend on the basis of isotope data and fluid inclusion microthermometry. In addition, a weak wallrock alteration does not support fluid‐rock interaction as an efficient mechanism. Hence, the linear H₂O–CO₂ trend is interpreted in terms of absorption or dilution of CO₂–dominant magmatic vapor by meteoric‐derived water. Cooling effects resulting from dilution may have caused precipitation of ore minerals. Major and trace element compositions of regional granites show a high‐K calc–alkaline characteristics and an arc–affinity. Lead isotopic compositions of galena samples from the Dajing deposit exhibit elevated U/Pb and Th/Pb ratios. These characteristics indicate a common source of supra subduction zone mantle wedge for regional granites and metals from the Dajing deposit.     

A study of the factors influencing the occurrence of landslides in the Wushan area

Due to the complex natural geological conditions, many slope-related geological hazards occur in the Three Gorges Reservoir area in China. This study focuses on the characteristics of landslide development and their underlying mechanisms in this area. A statistical analysis is conducted to determine the characteristics of landslide development in the Wushan area, including the landslide distribution as a function of the elevation, slope, landslide material composition, scale, lithology, boundary conditions, instability mechanism, stratigraphic age, attitude, and sliding direction. The mechanisms of slope instability and the effect on the occurrence of landslides are analyzed. This study provides important reference material for landslide research in the Three Gorges Reservoir area and similar stratigraphic areas.     

Potential water sources for Late Quaternary Megalake Jilantai-Hetao,China, inferred from mollusk shell <Superscript>87</Superscript>Sr/<Superscript>86</Superscript>Sr ratios

Lake Jilantai-Hetao, a megalake, was formed some time before 60–50 ka, along the Great North Bend of the Yellow River. The basin is now dry, with most of the area covered by aeolian sand. We are investigating this profound hydrologic change using a number of research approaches. Paleoshorelines of this megalake are best preserved in the Jilantai area in the southwestern portion of the megalake basin. We collected aquatic mollusk shells from littoral sediments at different altitudes around Jilantai and measured their strontium isotope compositions. ⁸⁷Sr/⁸⁶Sr ratios in shell carbonates are different between the high lake phase (~1,080–1,050 m altitude) and the low lake phase (~1,044–1,030 m altitude), with a small shift in average strontium ratios to more radiogenic values during the low lake phase. Based on regional hydrology and physical geography, we conclude that water from the Yellow River was the dominant water source supplying this megalake. ⁸⁷Sr/⁸⁶Sr ratios of modern water samples suggest the Yellow River was the dominant water source during the high lake phase, but that the relative contribution of Yellow River water to the megalake was reduced, and that the relative contributions of local precipitation and groundwater increased, during the low lake phase.     

专题地图图面要素自动配置方法的研究

实现地图图面要素配置的自动化是地图制图自动化中的一个重要部分,能够帮助制图人员提高制图效率。文中在分析国内外有关研究成果的基础上,利用地图图面配置规律和视觉平衡理论,提出一种自动搜寻地图图面要素合适位置的方法。该方法从专题地图生产的实际需要出发,考虑了纸张大小和地图比例尺等因素,用矩形框表示图面要素的大小和位置,简化设计过程。最后,在CorelDRAW环境下,利用VBA技术实现文中所提出的方法。该软件提供了多种地图图面要素配置模板供地图设计人员选择,能进行地图图面要素位置的自动冲突探测,可以为地图设计人员提供一个标准化地图图面配置模板。     

Examining human heat stress with remote sensing technology

Heat stress as an environmental hazard which can seriously affect productivity, health, or even survival of individuals has long been studied. Despite the endeavors that have been made to address the issue quantitatively with various heat stress indices, they are often measured at scatter sites. This research devotes to revealing human heat stress within continuous space with remote sensing technology. The study began with the retrieval of dry-bulb temperature from land surface temperature (LST) with empirical models. As wet-bulb temperature was calculated from dry-bulb temperature and relative humidity, discomfort index (DI) as an indicator of heat stress was revealed for the study area at 1 km spatial resolution for three summer days. Results indicated that DI can be derived within continuous space with remotely sensed data, and its spatial distribution can be dramatically affected by relative humidity. Further comparison between DI and LST indicated that LST as a widely utilized indicator of surface thermal condition fails to address human heat stress as environmental factors such as relative humidity are not taken into account.