准噶尔盆地腹部地区生烃增压定量化评价——东道海子北凹陷为例

目前准噶尔盆地腹部地区超压演化过程仅提供了相对时间、概念、定性的认识,并未达到定量化。本文以东道海子北凹陷为例,基于流体包裹体、单井一维和剖面二维烃源岩成熟生烃史模拟技术,采用生烃增压模型定量化评价了侏罗纪八道湾组顶部和底部烃源岩的生烃增压演化过程。研究结果表明侏罗纪八道湾组为东道海子北凹陷主力烃源岩,具有幕式排烃的特点。八道湾组底部烃源岩经历了3 次超压增加和两次超压释放的过程,顶部烃源岩经历了两次超压增加和一次超压释放的过程。八道湾底部烃源岩3 次超压增加的时间分别为距今170～70 Ma、55～23 Ma、10～0 Ma,对应最大压力系数均为2.0,最大剩余流体压力50 MPa,两次超压释放的时间分别为70～55 Ma、23～10 Ma;八道湾组顶部烃源岩两次超压增加的时间分别为130～40 Ma、23～0 Ma,对应流体最大压力系数最大亦可达2.0 左右,最大剩余流体压力44 MPa,超压释放的时间为40～23 Ma。     

Petrophysical characterisation of tight sandstone gas reservoirs using nuclear magnetic resonance: a case study of the upper Paleozoic strata in the Kangning area,eastern margin of the Ordos Basin,China

Residual and movable porosity are significant parameters for characterising petrophysical properties, especially in tight reservoirs. Eight tight sandstone samples from the upper Paleozoic gas-bearing strata in the Kangning area, from the eastern margin of the Ordos Basin, were analysed using nuclear magnetic resonance (NMR), scanning electron microscopy (SEM), petrography, and porosity and permeability tests. The lithology and pore types were identified and classified using petrography and SEM. The residual and movable porosity were obtained with NMR. In addition, NMR was used to visualise pore structure and pore size distribution. The results suggest that the upper Paleozoic sandstones in the study area mainly comprise feldspathic litharenite and litharenite. The sandstone porosity and permeability are low, with means of 5.9% and 0.549 mD, respectively. Four pore types exist in the tight sandstones: residual primary pores, grain dissolution pores, micropores (clay-dominated) and microfractures. The T₂ spectra under water-saturated conditions correlate with pore size and can be used to distinguish small and large pores based on the transverse relaxation time cutoff value of 10 ms, which corresponds to a pore diameter of 0.232 μm. Small pores account for 72% of the pores in the tight sandstones. The continuous bimodal T₂ spectra suggest good connectivity between small and large pores, despite the low porosity and permeability. In this study, the movable porosity of the major tight sandstone gas reservoirs is higher than the residual porosity, which confirms the effective evaluation of movable porosity to tight sandstone reservoirs, based on NMR experiments.     

Silver–bearing minerals in the Xinhua hydrothermal vein-type Pb-Zn deposit,South China

Mineralogy and Petrology - Electron probe microanalysis (EPMA) results are reported for newly identified silver–bearing minerals from the Xinhua deposit, Yunkaidashan area, South China. The...     

Real-time identification of urban rainstorm waterlogging disasters based on Weibo big data

With the acceleration of urbanisation in China, preventing and reducing the economic losses and casualties caused by urban rainstorm waterlogging disasters have become a critical and difficult issue that the government is concerned about. As urban storms are sudden, clustered, continuous, and cause huge economic losses, it is difficult to conduct emergency management. Developing a more scientific method for real-time disaster identification will help prevent losses over time. Examining social media big data is a feasible method for obtaining on-site disaster data and carrying out disaster risk assessments. This paper presents a real-time identification method for urban-storm disasters using Weibo data. Taking the June 2016 heavy rainstorm in Nanjing as an example, the obtained Weibo data are divided into eight parts for the training data set and two parts for the testing data set. It then performs text pre-processing using the Jieba segmentation module for word segmentation. Then, the term frequency–inverse document frequency method is used to calculate the feature items weights and extract the features. Hashing algorithms are introduced for processing high-dimensional sparse vector matrices. Finally, the naive Bayes, support vector machine, and random forest text classification algorithms are used to train the model, and a test set sample is introduced for testing the model to select the optimal classification algorithm. The experiments showed that the naive Bayes algorithm had the highest macro-average accuracy.     

Water system characteristics of Karst river basins in South China and their driving mechanisms of hydrological drought

Natural Hazards - It is common knowledge that drought is considered one of the most damaging natural disasters in terms of economic costs, societal problems, and ecological impacts. In this study,...     

鄂尔多斯盆地西峰和姬塬油田长81段低渗透储层迥异性

利用岩芯、薄片、测井等资料,从储层特征及孔隙演化角度对比分析了西峰和姬塬油田长8₁低渗透储层的迥异性。分析结果表明,两地区长8₁储层的共性为:1）储层砂体为浅水三角洲前缘的多期叠加的水下分流河道厚层砂体,且在空间上具有良好的连续性;2）砂体为岩屑长石砂岩和长石岩屑砂岩,属于细砂岩和极细砂岩,分选以较好为主;3）储层孔隙类型以粒间孔和溶蚀孔为主,原始孔隙度约38%,压实作用、胶结作用孔隙损失率约35%,最终储层孔隙度约7%。两地区长8₁储层存在以下差异:1）姬塬地区长8₁水下分流河道砂体叠加期次不明显,为"连续退积式"沉积模式,而西峰地区具有明显的垂向加积特征,为"顶牛"沉积模式;2）粒间孔、岩屑溶孔、晶间孔姬塬地区低于西峰地区,而溶蚀孔姬塬地区高于西峰地区;3）储层后期成岩演化过程中,姬塬和西峰地区长8₁砂体平均胶结孔隙度损失率为13.87%和11.99%,姬塬地区胶结孔隙度损失程度高于西峰地区,而溶蚀增孔率分别为3.71%和2.79%,姬塬地区溶蚀增孔率高于西峰地区。     

高亚洲地区冰崩灾害的研究进展

在全球气候变化的背景下,冰崩灾害极有可能成为人类面临的新常态。特别是在高亚洲地区,冰崩灾害事件严重威胁"亚洲水塔"的命运和"第三极"的生态安全。因此,研究冰崩灾害事件对于保障"一带一路"国家战略的顺利实施和保护"一带一路"沿线国家的生产与生存环境具有重要的现实意义。通过梳理历史上有记录的几次冰崩灾害事件,系统介绍冰崩的发生过程;再从冰崩体的物质组成、冰崩体的运动特征、冰崩发生的可能原因以及冰崩的影响等方面总结了冰崩的研究内容;重点阐述了冰崩的研究方法;最后讨论了当前冰崩研究存在的问题,并从冰崩研究方法等角度展望了未来冰崩灾害事件的研究方向。     

新特提斯洋俯冲起始的地质记录:土耳其南部蛇绿岩和变质底板

在现行板块构造理论的框架下,板块的初始俯冲是岩浆活动和构造运动发生转变的重要过程,亦是理解板块运动的关键节点。在俯冲起始过程中,主要存在四个方面的地质记录,分别为一系列地球化学成分多样的岩浆活动、SSZ型蛇绿岩、变质底板和玻安岩及其对应的铬铁矿床。特提斯造山带作为公认的研究板块构造理论尤其是初始俯冲的关键场所,一直备受地学界的重视。而土耳其南部构造带作为特提斯造山带的重要组成部分,亦是确定亚欧板块和阿拉伯板块之间缝合线存在的重要标志。该南部构造带是研究新特提斯洋俯冲起始的理想场所,上述关于俯冲初始的四个地质记录均保存良好,且有如下方面的重要特点:1)不同地区的镁铁质岩石甚至同一地区的镁铁质岩石具有不同的地球化学特征,从似洋中脊玄武岩,到过渡型岩石类型和玻安质岩石均有发育; 2)大部分蛇绿岩具有完整的序列,各单元及变质底板岩石中普遍发育侵入的基性岩脉,产状多变,是多期岩浆事件的产物; 3)蛇绿岩下部通常发育一套角闪岩相变质底板,且其年龄与蛇绿岩的形成年龄基本一致; 4)蛇绿岩中普遍发育铬铁矿床,以高Cr型为主,部分蛇绿岩中还赋存高Al-高Cr的过渡型铬铁矿,均被认为是幔源岩浆与地幔橄榄岩反应的产物。因而,这些地质体完整记录了新特提斯洋形成-俯冲-消减的演化过程。     

Study on the Development Laws of Bed-Separation Under the Hard-Thick Magmatic Rock and its Fracture Disaster-Causing Mechanism

Based on the analysis of dynamic phenomena under the condition of high-located hard-thick (HLHT) stratum of one coal mine, along with the similar material simulation and theoretical analysis, the characteristics of bed separation development and cracks distribution under the HLHT stratum are studied. This paper proposes a discriminating method for overlying strata Three Zones considering the influence of HLHT stratum. The development laws of cracks and disaster-causing mechanism of hard-thick magmatic rock in different strata are respectively analyzed. The studies show that in line with the working face advancing direction, the height of bed separation under the magmatic rock increases in the trend of “Increase–Stability–Decrease”, and the width of bed separation increases linearly. The width of bed separation reaches the maximum before the first breaking of magmatic rock, the bed separation completely closes after the breaking. There are no obvious bed separations during the period migration of magmatic rock. Along the direction of the height of roof, the development of bed separation is characterized by bottom-up jump based on the key strata. The analyzed results of “Three zone” height obtained by the discriminate method of overlying strata Three Zones which is based on the key strata theory and the S–R instability theory are in line with the actual facts. When the hard-thick magmatic rock is in the fractured zone, large amounts of gas and water are easy to accumulate in the bed separation space and “O” ring space around the gob. The first breaking of magmatic rock may induce bed separation gas outburst and water inrush. When the hard-thick magmatic rock is in the sagging zone, the long-term stability of magmatic rock will not cause serious disasters. But with the adjacent working face mining, bed separation gas and water often become a safety hazard.     

The Derivation and Validation of TBM Disc Cutter Wear Prediction Model

The problem of disc cutter wear is inevitable when shield or TBM excavating hard rock for a long distance, thus, the study of disc cutter wear model has an important project value on predicting its service life and replacement opportunity. It is put forward by analyzing disc cutter wear mechanism that the main wear form is abrasive wear, which is based on plastic removal mechanism. Then, disc cutter wear rate and linear wear rate prediction models are obtained by approximate calculation and mathematical deduction, which are based on Rabinowicz equation and CSM model. At last, the two models are verified through field test data from three projects, and the results show that the prediction model can accurately reflect the real wear situation of disc cutter.