GPS测定坐标转换至地方坐标

GPS测量得到的是WGS-84中的地心空间直角坐标，而工程施工中通常使用地方独立坐标系，要求得到地方平面坐标。平面转换模型原理简单，数值稳定可靠，但只能适用于小范围的GPS测量。空间转换模型可用于大范围GPS测量，分为七参数转换和三参数转换两种。鉴于北京54坐标的大地高通常不能精确已知，对这两种参数转换方法得到的平面坐标的精度进行了比较，得出大地高精度主要表现为对高程的影响，对平面坐标影响较小的结论，同时，还讨论了七参数与三参数对转换结果的影响。     

观测有效性的度量方法

基于Hilbert空间理论 ,通过对观测方程的系数阵实施格拉姆_施密特 (Gram_Schmidt,G_S)正交化过程 ,分析观测的两个特性 ,从一个新的角度论证了参数估计的必要观测问题 ,以及多余观测与必要观测的关系 ;用欧氏范数‖·‖2 和Frobenius‖·‖ F 范数作为基本度量工具对观测提供参数估计的信息量进行度量分析 ,研究观测的有效性和参数估计的可靠性。采用观测空间分析方法研究了测绘学科中必要观测、多余观测等基本概念 ;提出了观测信息量、观测有效性的概念和相应的度量方法 ;从观测的空间结构出发分析参数估计系统的可靠性 ,从一个侧面扩展和丰富了测绘学中的可靠性理论 ;丰富了研究测绘学中一些基本问题的分析方法 ,也为信息学中的数据挖掘问题提供了一种分析思路     

一种新的多通道GPS共视资料的处理算法

提出了一种按仰角加权的多通道GPS共视资料处理算法，充分利用了所有观测数据，同时抑制了多径等因素影响，从而可提高共视比对精度。对日本邮政省通讯研究所(CRL)和国家授时中心(NTSC)2002年5月～2003年3月的多通道共视比对的处理结果表明，新的处理算法结果更接近真实钟差。     

GIS支持下的全国广播电视信息管理系统的建设

介绍了GIS支持下的与专业信息充分结合的 ,为领导和专业技术人员提供决策支持等方面的实例。从技术和应用角度论述了服务于全国广播、电视信息管理和决策的“GIS支持下的全国广播电视覆盖信息管理系统”。对构成系统的数据组成、数据库结构、主要功能模块、应用效果等情况进行了系统论述     

Continental subduction and exhumation of UHP rocks. Structural and geochronological insights from the Dabieshan (East China)

In the Dabieshan, the available models for exhumation of ultrahigh-pressure (UHP) rocks are poorly constrained by structural data. A comprehensive structural and kinematic map and a general cross-section of the Dabieshan including its foreland fold belt and the Northern Dabieshan Domain (Foziling and Luzenguang groups) are presented here. South Dabieshan consists from bottom to top of stacked allochtons: (1) an amphibolite facies gneissic unit, devoid of UHP rocks, interpreted here as the relative autochton; (2) an UHP allochton; (3) a HP rock unit (Susong group) mostly retrogressed into greenschist facies micaschists; (4) a weakly metamorphosed Proterozoic slate and sandstone unit; and (5) an unmetamorphosed Cambrian to Early Triassic sedimentary sequence unconformably covered by Jurassic sandstone. All these units exhibit a polyphase ductile deformation characterized by (i) a NW–SE lineation with a top-to-the-NW shearing, and (ii) a southward refolding of early ductile fabrics.

The Central Dabieshan is a 100-km scale migmatitic dome. Newly discovered eclogite xenoliths in a Cretaceous granitoid dated at 102 Ma by the U–Pb method on titanite demonstrate that migmatization post-dates HP–UHP metamorphism. Ductile faults formed in the subsolidus state coeval to migmatization allow us to characterize the structural pattern of doming. Along the dome margins, migmatite is gneissified under post-solidus conditions and mylonitic–ultramylonitic fabrics commonly develop. The north and west boundaries of the Central Dabieshan metamorphics, i.e. the Xiaotian–Mozitan and Macheng faults, are ductile normal faults formed before Late Jurassic–Early Cretaceous. A Cretaceous reworking is recorded by synkinematic plutons.

North of the Xiaotian–Mozitan fault, the North Dabieshan Domain consists of metasediments and orthogneiss (Foziling and Luzenguang groups) metamorphosed under greenschist to amphibolite facies which never experienced UHP metamorphism. A rare N–S-trending lineation with top-to-the-south shearing is dated at 260 Ma by the ⁴⁰Ar/³⁹Ar method on muscovite. This early structure related to compressional tectonics is reworked by top-to-the-north extensional shear bands.

The main deformation of the Dabieshan consists of a NW–SE-stretching lineation which wraps around the migmatitic dome but exhibits a consistently top-to-the-NW sense of shear. The Central Dabieshan is interpreted as an extensional migmatitic dome bounded by an arched, top-to-the-NW, detachment fault. This structure may account for a part of the UHP rock exhumation. However, the abundance of amphibolite restites in the Central Dabieshan migmatites and the scarcity of eclogites (found only in a few places) argue for an early stage of exhumation and retrogression of UHP rocks before migmatization. This event is coeval to the N–S extensional structures described in the North Dabieshan Domain. Recent radiometric dates suggest that early exhumation and subsequent migmatization occurred in Triassic–Liassic times. The main foliation is deformed by north-verging recumbent folds coeval to the south-verging folds of the South Dabieshan Domain. An intense Cretaceous magmatism accounts for thermal resetting of most of the ⁴⁰Ar/³⁹Ar dates.

A lithosphere-scale exhumation model, involving continental subduction, synconvergence extension with inversion of southward thrusts into NW-ward normal faults and crustal melting is presented.     

POSITIVE INVERSION STRUCTURE OF THE CENTRAL STRUCTURE BELT IN TURPAN-HAMI BASIN

The central structure belt in Turpan-Hami basin is composed of the Huoyanshan structure and Qiketai structure formed in late Triassic-early Jurassic, and is characterized by extensional tectonics. The thickness of strata in the hanging wall of the growth fault is obviously larger than that in the footwall, and a deposition center was evolved in the Taibei sag where the hanging wall of the fault is located. In late Jurassic the collision between Lhasa block and Eurasia continent resulted in the transformation of the Turpan-Hami basin from an extensional structure into a compressional structure, and consequently in the tectonic inversion of the central structure belt of the Turpan-Hami basin from the extensional normal fault in the earlier stage to the compressive thrust fault in the later stage. The Tertiary collision between the Indian plate and the Eurasian plate occurred around 55Ma, and this Himalayan orogenic event has played a profound role in shaping the Tianshan area, only the effect of the collision to this area was delayed since it culminated here approximately in late Oligocene-early Miocene. The central structure belt was strongly deformed and thrusted above the ground as a result of this tectonic event.     

Origin and tectonic significance of a Mesozoic multi-layer over-thrust system within the Yangtze Block (South China)

In the Yangtze Block (South China), a well-developed Mesozoic thrust system extends through the Xuefeng and Wuling mountains in the southeast to the Sichuan basin in the northwest. The system comprises both thin- and thick-skinned thrust units separated by a boundary detachment fault, the Dayin fault. To the northwest, the thin-skinned belt is characterized by either chevron anticlines and box synclines to the northwest or chevron synclines to the southeast. The former structural style displays narrow exposures for the cores of anticlines and wider exposures for the cores of synclines. Thrust detachments occur along Silurian (Fs) and Lower Cambrian (Fc) strata and are dominantly associated with the anticlines. To the southeast, this style of deformation passes gradually into one characterized by chevron synclines with associated principal detachment faults along Silurian (Fs), Cambrian (Fc) and Lower Sinian (Fz) strata. There are, however, numerous secondary back thrusts. Therefore, the thin-skinned belt is like the Valley and Ridge Province of the North American Applachian Mountains. The thick-skinned belt structurally overlies the thin-skinned belt and is characterized by a number of klippen including the Xuefeng and Wuling nappes. It is thus comparable to the Blue Ridge Province of Appalachia.The structural pattern of this thrust system in South China can be explained by a model involving detachment faulting along various stratigraphic layers at different stages of its evolution. The system was developed through a northwest stepwise progression of deformation with the earliest delamination along Lower Sinian strata (Fz). Analyses of balanced geological cross-sections yield about 18.1–21% (total 88 km) shortening for the thin-skinned unit and at least this amount of shortening for the thick-skinned unit. The compressional deformation from southeast to northwest during Late Jurassic to Cretaceous time occurred after the westward progressive collision of the Yangtze Block with the North China Block and suggests that the orogenic event was intracontinental in nature.     

含裂隙煤层底板突水规律的数值模拟与工程应用

本文结合淮北杨庄矿某工作面实际工程情况, 利用NCAP-2D-W对煤层底板突水进行多方案的数值模拟试验研究。主要内容包括:(1) 考虑在承压水不变的条件下,设计不同裂隙分布状态,探讨单裂隙、多裂隙、不同长度裂隙对煤层底板破坏的影响及开采矿压对裂隙顶部破坏的影响;(2) 考虑承压水的变化,分别考虑单裂隙和多裂隙两种分布状态,探讨裂隙对煤层底板破坏的影响及开采矿压对裂隙底部破坏的影响。通过分析受采动荷载、岩层结构变化、煤层底板中裂隙分布状态及承压水变化等因素影响的数值试验,获得了随开采工作面不断推进煤层底板破坏区的发展、突水导升高度的递增、突水通道的形成等相关规律。     

Theoretical Study on Stochastic Modeling of Combined Gravity-Magnetic-Electric-Seismic Inversion and Its Application

As gravity field,magnetic field,electric field and seismic wave field are all physical fields,their object function,reverse function and compound function are certainly infinite contiuously differentiable func-tions which can be expanded into Taylor (Fourier) series within domain of definition and be further reduced in-to solving stochastic distribution function of series and statistic inference of optimal approximation,This is the basis of combined gravity-magnetic-electric-seismic inversion built on the basis of separation of field and source gravity-magnetic difference-value(D-value)trend surface,taking distribution-independent fault sys-tem as its unit,depths of seismic and electric interfaces of interests as its corresponding bivariate compound re-verse function of gravity-magnetic anomalies and using high order polynomial(high order trigonometric func-tion)approximating to its series distribution,The difference from current dominant inversion techniques is that,first,it does not respectively create gravity-seismic,magnetic-seismic deterministic inversion model from theoretical model,but combines gravity-magnetic-electric-seismic stochastic inversion model from stochastic model;second,after the concept of equivalent geological body being introduced,using feature of independent variable of gravity-magnetic field functions,taking density and susceptibility related to gravity-magnetic func-tion as default parameters of model,the deterministic model is established owing to better solution to the con-tradictioc of difficulty in identifying strata and less test analytical data for density and susceptibility in newly explored area;third,under assumption of independent parent distribution,a real modeling by strata,the prob-lem of difficult plane closure arising in profile modeling is avoided,This technology has richer and more detailed fault and strata information than sparse pattern seismic data in newly explored area,successfully inverses and plots structural map of Indosinian discontinuty in Hefei basin with combined gravity-magnetic-electric-seismic inversion,With development of high precision gravity-magnetic and overall geophysical technology,it is certain for introducing new methods of stochastic modeling and computational intelligence and promoting the develop-ment of combined gravity-magnetic-electric-seismic inversion to open a new substantial and promoting the develop-ment of combined gravity-magnetic-electric-seismic inversion to open a new substantial path.     

ENSO事件中纬向异常流反向与东西侧边界反射的联系

建立一个中等复杂程度的海-气耦合模式研究东、西边界反射,纬向平流项-u′(δ)(T+T′)/(δ)x在ENSO循环位相转换中的作用及东、西边界反射与纬向异常流(u′) 符号改变的关系.结果得到:u′超前Nio3区SSTA位相转变的原因是东、西边界反射造成的.Sverdrup 平衡时所产生的地转流(ur)与东、西边界反射所产生的地转流(ur)的方向在大部分时间里是相反的,同时ur与风应力强迫之间大约有9个月的滞后时间(Kelvin波从180°E出发经东边界反射产生的Rossby波到达180°E时间).在模式ENSO事件消亡过程中的某一时刻以后,边界反射产生的调整过程变为主要过程,u′主要由ur来决定,这样就造成了u′的反向先于Nio区SSTA的反向.它实际上是海洋的调整过程与风应力强迫之间滞后关系的一种反映.敏感性数值试验表明,取消东边界反射,耦合模式能够模拟ENSO循环,但其周期比控制试验的周期短一年(3年).取消-u′(δ)(T+T′)/(δ)x,耦合模式能够模拟ENSO循环,但其周期比控制试验的周期长2年(6年).