Cenozoic Vertical-Axis Rotations of the Hoh Xil Basin, Central–Northern Tibet

Understanding the Cenozoic vertical-axis rotation in the Tibetan Plateau is crucial for continental dynamic evolution. Paleomagnetic and rock magnetic investigations were carried out for the Oligocene and Miocene continental rocks of the Hoh Xil basin in order to better understand the tectonic rotations of central Tibet. The study area was located in the Tongtianhe area located in the southern part of the Hoh Xil basin and northern margin of the Tanggula thrust system in central-northern Tibet. A total of 160 independently oriented paleomagnetic samples were drilled from the Tongtianhe section for this study. The magnetic properties of magnetite and hematite have been recognized by measurements of magnetic susceptibility vs. temperature curves and unblocking temperatures. The mean directions of the Oligocene Yaxicuo Group in stratigraphic coordinates(Declination/Inclination = 354.9°/29.3°, k = 33.0, α_(95) = 13.5°, N =5 Sites) and of the Miocene Wudaoliang Group in stratigraphic coordinates(Declination/Inclination = 3.6°/36.4°, k = 161.0, α_(95) = 9.7°, N =3 Sites) pass reversal tests, indicating the primary nature of the characteristic magnetizations. Our results suggested that the sampled areas in the Tuotuohe depression of the Hoh Xil basin have undergone no paleomagnetically detectable rotations under single thrusting from the Tanggula thrust system. Our findings, together with constraints from other tectonic characteristics reported by previous paleomagnetic studies, suggest tectonic rotations in the Cuoredejia and Wudaoliang depressions of the Hoh Xil basin were affected by strike-slip faulting of the Fenghuo Shan-Nangqian thrust systems. A closer examination of geological data and different vertical-axis rotation magnitudes suggest the tectonic history of the Hoh Xil basin may be controlled by thrust and strike-slip faulting since the Eocene.     

气象影视素材数字化存储系统的设计及应用

介绍了利用非线性编辑系统和磁盘阵列等相关设备,对河南省气象影视中心保存的视音频素材进行数字化处理的方法,以及利用SQL数据库技术和ASP．NET编程语言,实现气象影视素材的数字化采集、信息标引编目、存储及管理、检索及共享等功能,建立河南省气象影视素材存储系统的关键技术。     

羌塘盆地岩石有限应变及地壳缩短分析

地处青藏高原腹地的羌塘盆地构造以EW向褶皱和逆(冲)断层及NW向、NE向平移断层为主,偶见NW向、NE向褶皱和近SN向正断层。盆地自印支期以来长期处于SN向强烈挤压,其岩石应变特征显示SN向缩短,EW向伸展,并具继承性、递进性应变,及由盆地周边造山带向盆地腹部岩石应变强度递减的趋势。盆地自印支运动以来SN向地壳缩短具递减性,地壳缩短率分别为上三叠统为38%、侏罗系为24%-26.3%,第三系为17.47%-19.2%。     

西藏尼玛盆地古新统—始新统牛堡组化学地层格架分析

已有勘探资料表明,西藏尼玛盆地古新统—始新统牛堡组地层具有良好的油气资源显示,然而目前有关于该套地层的地层格架划分仍然薄弱。化学地层学方法在北美页岩气勘探开发中取得了巨大成功,鉴于此,本文以尼玛盆地东部的协德乡南牛堡组剖面作为研究对象,通过对露头样品的主微量元素测试结果进行沉积地球化学、主成分分析、完备总体经验模态分解、以及自相关函数分析,从化学自—异旋回角度以及元素耦合行为出发,探讨地球化学基准面对化学地层格架的控制作用,从而为牛堡组地层提供化学地层划分方案。主成分分析结果表明,牛堡组地层沉积主要受控于细粒碎屑输入、碳酸盐岩、粗粒碎屑输入、氧化还原—生产力、以及盐度这五个因素;经验模态分解和自相关函数分析结果表明,牛堡组地层受到了明显的异旋回驱动,显示出多尺度基准面震荡特点。通过对异旋回信号分量（本征模函数,IMFs）进行重构,并且结合元素相互耦合特性,建立了牛堡组化学地层格架,该结果与岩石地层单元以及沉积相单元一致,证明了本文所提出的化学地层划分方案的可靠性和实用性。     

河南淅川盆地上白垩统恐龙蛋一新蛋种

河南淅川盆地的恐龙蛋发现与研究始于1974年,淅川盆地恐龙蛋具有非常高的多样性,共计发现4个蛋科、6个蛋属、6个蛋种,尤其以树枝蛋类最为丰富。近年来,河南地质博物馆对全省地质遗迹调查过程中,在淅川盆地再次有新的恐龙蛋类型的发现,本文对其中的部分标本进行记述,根据壳单元呈多分叉的不规则树枝状,蛋壳厚度为1.62～1.74 mm,锥体间隙明显,壳单元自锥体上部开始出现分枝,蛋壳中部大多具有3～4个分枝,近蛋壳外表面形成融合层,蛋壳具有复杂的气孔系统等特征区别于其他类型的树枝蛋类,建立一新蛋种:大石桥树枝蛋(Dendroolithus dashiqiaoensis oosp. nov.)。通过对淅川盆地恐龙蛋分类与对比、不同类型恐龙蛋在地层中的分布研究,将有助于盆地内白垩纪红层的划分,也将为秦岭东段各盆地中同一时期红层的划分与对比、古地理、古环境和古气候等研究提供更加翔实的古生物学证据。     

藏南地区海相白垩系富有机质沉积的影响因素浅析

藏南地区白垩纪时期广泛沉积了一套海相富有机质沉积物,而其中与C-T界线缺氧事件有关的黑色页岩引起了广泛关注。但是,其有机碳含量与西特提斯相比明显偏低。因此,有关该区对海相白垩纪富有机质沉积影响机制的认识显得尤为重要。文中选取前人研究程度较高的岗巴宗山Ⅱ剖面、定日贡扎剖面和江孜加不拉剖面、床得剖面,利用其相关数据,定量计算了这些剖面的沉积速率、堆积速率和古生产力值。结果表明,藏南地区沉积速率以C-T界线时期最高,而岗巴、定日地区与江孜地区的沉积速率表现出较大的差异,这主要与沉积环境有关;并且在沉积速率<4cm/ka时,随着沉积速率的增加,有机碳含量随之增加,而沉积速率较大时,则关系不明显。江孜地区初级生产力较低,其缺氧期黑色页岩的形成并不是高生产力的结果,可能与缺氧条件的保存作用相关;对于岗巴和定日地区而言,尽管计算的古生产力较低,但碳同位素正偏以及推测存在的沿岸上升洋流表明,该区白垩纪富有机质沉积拥有高的初级生产力和缺氧的保存条件,表明该区有良好的古海洋条件,富有机质沉积的形成是高生产力、缺氧的保存条件以及低的沉积速率(<4cm/ka)共同作用的结果。而产生有机碳偏低,从而使得计算的古生产力值偏低的原因,则可能与成岩后期强烈的风化作用,导致有机碳的损失有关;另外定日地区C-T期有机碳含量偏低则还与其沉积物粒度有关。     

Wet grindability of an industrial ore and its breakage parameters estimation using population balances

The grindability of a diasporic ore was studied by wet grinding in a laboratory ball mill and its breakage parameters were determined based on the population balance model (PBM). Four different feeds with unnatural size distributions were designed to save grinding and sieving work. It was found that three size-intervals fitted the first-order breakage, but the coarsest interval did not. The non-first order breakage was most probably caused by the heterogeneity of the material. The heterogeneity was then confirmed by experiments. The breakage rate and the breakage distribution parameters were back calculated by treating the non-first order breakage as two linear segments according to the grinding time. The back-calculated breakage rates were in good agreement with the values calculated directly from the experimental data, and non-normalizable breakage distribution was observed. The model with the obtained parameters simulated the experimental product size distributions with good accuracy. These findings are valuable to the simulation and optimization of the industrial grinding processes of diasporic ores.     

走向构造地质学健康发展之路——我国构造地质学有关问题及未来发展方向探讨

半个多世纪以来,我国构造地质学教学和科学研究均取得了长足发展,但也出现了一些问题。为了促进学科发展,让构造地质学走上健康发展之路,构造地质与地球动力学专业委员会组织召开了“构造地质学有关问题及未来发展方向”研讨会。本文为该研讨会成果的简要总结,内容包括：(1)构造地质学概念、理论和方法理解和应用中存在的部分问题;(2)构造地质学教学存在的一些问题及建议;(3)构造地质学未来发展方向;(4)走构造地质学健康发展之路。供有关部门和人员参考。