青藏高原植物形态和解剖适应性研究进展

与低海拔地区相比，青藏高原的太阳辐射、水分条件、氧分压、气温等环境条件都有明显差异，青藏高原的植物在细胞壁厚度、栅栏细胞层数、通气组织大小、异细胞数量和分布、表皮附属物类型等方面与低海拔地区的相比也有较大的不同。综述了在青藏高原特殊的生态条件下，植物在形态和解剖方面的适应性表现，分析了该领域目前的研究特点和存在的一些问题，并在全球环境变化背景下，对其发展前景进行了展望，指出了未来的发展趋势。     

Food Deserts in the Prairies? Supermarket Accessibility and Neighborhood Need in Edmonton,Canada*

The U.S. and U.K. literatures have discussed “food deserts,” reflecting populated, typically urban, low‐income areas with limited access to full‐service supermarkets. Less is known about supermarket accessibility within Canadian cities. This article uses the minimum distance and coverage methods to determine supermarket accessibility within the city of Edmonton, Canada, with a focus on high‐need and inner‐city neighborhoods. The results show that for 1999 both of these areas generally had higher accessibility than the remainder of the city, but six high‐need neighborhoods had poor supermarket accessibility. We conclude by examining potential reasons for differences in supermarket accessibility between Canadian, U.S., and U.K. cities.     

Gzhelian fusulinids first discovered in central Iran

Gzhelian deposits established in Iran for the first time are described. They rest with a considerable hiatus on the Moscovian deposits constituting, along with Asselian strata, an integral carbonate succession of the Zaladu Formation in eastern Iran. The Zaladu Formation is correlative with the Vazhnan Formation of the Abadeh region (central Iran) and the Dorud Formation of the Elburz (Alborz) Mountains. An assemblage of Gzhelian fusulinids from the studied section is well comparable with the assemblage of the Ultradaixina bosbytauensis Zone distinguished in the uppermost Gzhelian of the Darvaz, Fergana, the Southern Urals, Donetsk Basin, and Carnic Alps. Two new species of the genus Schellwienia (Sch. anarakensis and Sch. stocklini) are described. Gzhelian and Asselian fusulinids found in the section are figured in two paleontological plates.     

Paleoproterozoic accretion in the Northeast Siberian craton: Isotopic dating of the Anabar collision system

Geochronological database considered in the work and characterizing the Anabar collision system in the Northeast Siberian craton includes coordinated results of Sm-Nd and Rb-Sr dating of samples from crustal xenoliths in kimberlites, deep drill holes, and bedrock outcrops. As is inferred, collision developed in three stages dated at 2200–2100, 1940–1760, and 1710–1630 Ma. The age of 2000–1960 Ma is established for substratum of mafic rocks, which probably originated during the lower crust interaction with asthenosphere due to the local collapse of the collision prism. Comparison of Sm-Nd and Rb-Sr isochron dates shows that the system cooling from ≈700 to ≈300°C lasted approximately 300 m.y. with a substantial lag relative to collision metamorphism and granite formation. It is assumed that accretion of the Siberian craton resulted in formation of a giant collision mountainous structure of the Himalayan type that was eroded by 1.65 Ga ago, when accumulation of gently dipping Meso-to Neoproterozoic (Riphean) platform cover commenced.     

区域性地质灾害气象预报方法研究

从气象的角度，基于对全国地质灾害预警区域的划分，利用历史地质灾害记录以及历史气象资料，分区建立了全国范围的区域气象潜势预报模型，并从2003年6月1日开始投入业务应用。总体预报服务效果较好，收到了较好的社会效益。同时还要进一步加强科学研究，提高科技含量，优化预报模型。     

贵州关岭生物群中植物化石的发现及其意义

关岭生物群是近年来在我国贵州关岭地区瓦窑组中发现的一个十分重要的生物群 ,其中的植物化石经研究计有 Equisetites cf.arenaceus(Jaeger) Bronn.、Ctenozamitessarrani Zeiller。依据植物化石 C.sarrani常见于晚三叠世和 E.cf.arenaceus系似木贼属中较古老的类型 ,指出含植物化石的地层时代为晚三叠世卡尼期。瓦窑组系海相沉积 ,其中的植物化石无疑为异地埋藏 ,但从化石通常保存尚好来看 ,估计搬运的距离不会很远 ,它们可能是从距海岸不远的陆地被河流带到较平静的海湾或海槽而沉积下来的。此外 ,从该组植物茎干化石具清楚的年轮分析 ,推测卡尼期时 ,贵州关岭一带为非热带雨林地区 ,一年中气候不是四季如一 ,而是有明显的季节变化     

Structural damage detection using the optimal weights of the approximating artificial neural networks

This work presents a novel neural network‐based approach to detect structural damage. The proposed approach comprises two steps. The first step, system identification, involves using neural system identification networks (NSINs) to identify the undamaged and damaged states of a structural system. The partial derivatives of the outputs with respect to the inputs of the NSIN, which identifies the system in a certain undamaged or damaged state, have a negligible variation with different system errors. This loosely defined unique property enables these partial derivatives to quantitatively indicate system damage from the model parameters. The second step, structural damage detection, involves using the neural damage detection network (NDDN) to detect the location and extent of the structural damage. The input to the NDDN is taken as the aforementioned partial derivatives of NSIN, and the output of the NDDN identifies the damage level for each member in the structure. Moreover, SDOF and MDOF examples are presented to demonstrate the feasibility of using the proposed method for damage detection of linear structures. Copyright © 2001 John Wiley & Sons, Ltd.     

A mathematical hysteretic model for elastomeric isolation bearings

An analytical model for high damping elastomeric isolation bearings is presented in this paper. The model is used to describe mathematically the damping force and restoring force of the rubber material and bearing. Ten parameters to be identified from cyclic loading tests are included in the model. The sensitivity of the ten parameters in affecting the model is examined. These ten parameters are functions of a number of influence factors on the elastomer such as the rubber compound, Mullins effect, scragging effect, frequency, temperature and axial load. In this study, however, only the Mullins effect, scragging effect, frequency and temperature are investigated. Both material tests and shaking table tests were performed to validate the proposed model. Based on the comparison between the experimental and the analytical results, it is found that the proposed analytical model is capable of predicting the shear force–displacement hysteresis very accurately for both rubber material and bearing under cyclic loading reversals. The seismic response time histories of the bearing can also be captured, using the proposed analytical model, with a practically acceptable precision. Copyright © 2002 John Wiley & Sons, Ltd.     

Tests on low‐ductility RC frames under high‐ and low‐frequency excitations

The response of low‐ductility reinforced concrete (RC) frames, designed typically for a non‐seismic region, subjected to two frequencies of base excitations is studied. Five half‐scaled, two‐bay, two‐storey, RC frames, each approximately 5 m wide by 3.3 m high, were subjected to both horizontal and/or vertical base excitations with a frequency of 40 Hz as well as a lower frequency of about 4 Hz (close to the fundamental frequency) using a shake table. The imposed acceleration amplitude ranged from 0.2 to 1.2g. The test results showed that the response characteristics of the structures differed under high‐ and low‐frequency excitations. The frames were able to sustain high‐frequency excitations without damage but were inadequate for low‐frequency excitations, even though the frames exhibited some ductility. Linear‐elastic time‐history analysis can predict reasonably well the structural response under high‐frequency excitations. As the frames were not designed for seismic loads, the reinforcement detailing may not have been adequate, based on the crack pattern observed. The effect of vertical excitation can cause significant additional forces in the columns and moment reversals in the beams. The ‘strong‐column, weak‐beam’ approach for lateral load RC frame design is supported by experimental observations. Copyright © 2001 John Wiley & Sons, Ltd.     

Optimal design of passive energy dissipation systems based on H∞ and H2 performances

Passive energy dissipation devices (EDDs), such as viscous dampers, viscoelastic dampers, etc., have been used to effectively reduce the dynamic response of civil infrastructures, such as buildings and bridges, subject to earthquakes and strong winds. The design of these passive energy dissipation devices (EDDs) involves the determination of the optimal locations and the corresponding capacities. In this paper, we present two optimal design methodologies for passive EDDs based on active control theories, including H_∞ and H₂ performances, respectively. The optimal design methodologies presented are capable of determining the optimal locations and the corresponding capacities of EDDs. Emphasis is placed on the application of linear matrix inequality (LMI) for the effective design of passive EDDs using the popular MATLAB toolboxes. One important advantage of the proposed approaches is that the computation of the structural response is not needed in the design process. The proposed optimal design methodologies have been applied to: (i) a 10‐storey building and a 24‐storey building both subject to earthquake excitations, and (ii) a 76‐storey wind‐excited benchmark building, to demonstrate the advantages of the proposed design methodologies over the conventional equal capacity design. Copyright © 2002 John Wiley & Sons, Ltd.