Slip-weakening constitutive relation and the structure in the vicinity of a shear crack tip

Shear-crack model with a cohesive zone (or breakdown zone) is appropriate for the analysis of a fault surface in which slip distribution is strongly nonuniform. As the slipped portion advances, slip-weakening occurs over the so-called cohesive zone, a distance behind the fault tip. For a prescribed strength vs. displacement constitutive relation, however, the zone structure is difficult to determine by an analytical method except for some simple cases, thus it often requires a certain numerical procedure. This work proposes a numerical procedure to obtain approximated solutions of the problem by combining a series of elastic solutions derived bySmith (1974). The series is linearly combined and the unknown coefficients are determined by a nonlinear least square method. This method can fit a wide range of prescribed strength vs. displacement relations which may be simple algebraic relations or curves obtained by laboratory tests. By examining the residual errors and in comparison with a derived result in which linear stress is assumed within the zone, it could be concluded that the results provide good accuracy. Moreover, because the results are written in formulae, they can be easily referred to or used. By fitting constitutive curves in many different shapes, it is found that the stress distribution within the zone is more sensitive to the constitutive curve shape than the displacement. The most interesting fact is that the zone size is not sensitive to the curve shape, i.e., the zone size can be estimated by $$R = 3\mu \zeta \upsilon _c /\{ 2(1 - \upsilon )(\tau _c - \tau _f )\}$$ with ζ=1±0.11 for most cases.     

Strength and stability of frictional sliding of gabbro gouge at elevated temperatures

To investigate the strength of frictional sliding and stability of mafic lower crust, we conducted experiments on oven-dried gabbro gouge of 1 mm thick sandwiched between country rock pieces (with gouge inclined 35° to the sample axis) at slip rates of 1.22 × 10^− 3 mm/s and 1.22 × 10^− 4 mm/s and elevated temperatures up to 615 °C. Special attention has been paid to whether transition from velocity weakening to velocity strengthening occurs due to the elevation of temperature.Two series of experiments were conducted with normal stresses of 200 MPa and 300 MPa, respectively. For both normal stresses, the friction strengths are comparable at least up to 510 °C, with no significant weakening effect of increasing temperature. Comparison of our results with Byerlee's rule on a strike slip fault with a specific temperature profile in the Zhangbei region of North China shows that the strength given by experiments are around that given by Byerlee's rule and a little greater in the high temperature range.At 200 MPa normal stress, the steady-state rate dependence a − b shows only positive values, probably still in the “run-in” process where velocity strengthening is a common feature. With a normal stress of 300 MPa, the values of steady-state rate dependence decreases systematically with increasing temperature, and stick-slip occurred at 615 °C. Considering the limited displacement, limited normal stress applied and the effect of normal stress for the temperatures above 420 °C, it is inferred here that velocity weakening may be the typical behaviour at higher normal stress for temperature above 420 °C and at least up to 615 °C, which covers most of the temperature range in the lower crust of geologically stable continental interior. For a dry mafic lower crust in cool continental interiors where frictional sliding prevails over plastic flow, unstable slip nucleation may occur to generate earthquakes.     

《生物地理学》实践教学改革与大学生创新能力培养

当前,社会对人才创新能力与实践能力的要求越来越高,如何培养高素质创新能力的人才已成为检验高等教育的重要标志。本文探讨了将“自主、探究与合作的学习方式”运用于《生物地理学》实践教学,激发学生的创新思维,学习科学研究的方法,发展综合运用知识的能力,培养创新能力。     

吉尔嘎朗图凹陷宝饶洼槽下白垩统层序地层与沉积体系

运用高分辨率层序地层学原理和方法,通过对钻井和地震资料的综合分析,在二连盆地吉尔嘎朗图凹陷下白垩统中识别出1个超长期基准面旋回(二级层序)SSC1和5个长期基准面旋回(三级层序):LSC1,LSC2,LSC3,LSC4,LSC5,分析了各旋回的发育特征。识别出五种类型的沉积体系:滨浅湖近岸水下扇、较深水湖浊积扇、滨浅湖扇三角洲、滨浅湖辫状河三角洲和河流沉积体系,并在等时地层格架内分析了各基准面旋回的沉积体系构成和储层砂体的发育情况。综合分析生、诸、盖条件后认为,在垂向上,LSC3旋回为本区最有利的储集层段,在平面上,本区的油气勘探应主要寻找宝饶构造带辫状河三角洲前缘砂体,主要储层砂体类型为前缘分流水道砂和前缘席状砂。     

单斜构造岩溶含水层及其岩溶渗漏条件分析--以湖北水江坪河水电站河湾地块为例

通过对湖北水江坪河水电站河湾地块寒武系下统龙王庙组上段(∈21l)单斜岩溶含水系统的水动力、温度、水量均衡以及岩溶发育特征分析,提出在单斜岩层中存在2层岩溶结构和2层岩溶水系统,上层岩溶水系统的水位高于正常蓄水位(475m),而深层岩溶水系统的水位低于正常蓄水位(475m).在建库条件下,库水可通过深层岩溶水系统向河湾下游径流排泄,即河湾地块存在岩溶渗漏问题.该结论已得到深孔勘探以及钻孔彩色录像初步查证.     

伊宁吐拉苏火山盆地热液活动与金成矿关系

吐拉苏火山盆地中与金成矿有关的热液富含K^＋、Na^＋、F、SO4^2-和N2、O2等，是一种主要来源于岩浆．火山的热液，有大气水参于的次生热液．平均均一温度96～158℃，平均盐度0．26％～1．08％，热液活动深度0．26～0．67km，具有低温、低盐度、在地壳浅部活动的基本特征．热液活动生成围绕金矿体由内向外环状展布的黄英岩化、高级泥化、泥化和绿泥石碳酸盐化4个围岩蚀变带．与其有关的金成矿期分为原生沉积富集和次生热液交代蚀变2期，后者包括毒砂黄铁矿化、面状硅化、脉状硅化和绿泥石碳酸盐化4个成矿阶段．金富集成矿主要与黄英岩化蚀变带和面状硅化、脉状硅化2个成矿阶段密切相关．     

泥石流汇流槽可靠度分析

汇流槽是泥石流治理工程中常用的工程措施之一。文章基于汇流槽的倾倒破坏、滑移破坏及地基破坏模式，通过对汇流槽设计影响强烈的岩土参数、几何特征、荷载因素等敏感因子的求解方法及分布特征分析，从汇流槽的抗倾稳定、抗滑稳定和基底应力要求三方面建立极限状态方程。对于每个极限状态方程，在泰勒级数对非线性极限状态方程线性化后，运用一次二阶矩的理论，先假定失效点P^＊，求解出相应的均值和方差。然后根据可靠的定义，得到相应的可靠度指标，通过迭代法求解真正失效点的可靠度指标βi。最后根据3个状态方程相互独立的假定，得出整个结构的可靠度指标β。该方法在平川泥石流防治工程中得到了成功的运用。这对于可靠度设计方法在泥石流防治工程中的运用进行了有益的探讨。     

藏北安多地区侏罗纪菊石动物群及其古地理意义

藏北安多地区新发现2套以黑色页岩、深灰色钙质泥岩和泥灰岩为主的舍菊石化石的侏罗纪地层，它们与羌塘地区广泛分布的雁石坪群无论在化石组合或沉积特征方面都明显不同．岗尼乡剖面地层中产太阳菊石科的菊石，主要有Sonninia，Dorsetensia，Witchellia等。、这套地层是双湖地区色哇组的东延部分，时代确定为中侏罗世早中巴柔期114道班剖面中羌姆勒曲组的菊石化石大多归属于Virgatosphinctinae科，计有Aulacosphinctes、Virgatosphinctes等，均为上侏罗统菊石化石的典型分子，产出层位应归于提塘阶中、上部。藏北安多-改则以北一线的侏罗系深水黑色岩系虽不十分连续，但从有化石证据的土阿辛阶到巴柔阶再到提塘阶都有零星出露，它们同属一个沉积相区。侏罗纪时羌塘南部可能存在一套大陆边缘型沉积地层，因此有必要对该区的构造属性和演化历史重新进行解释。     

论网格技术及其与空间信息技术的集成

对网格的概念、技术优势和应用等作了简单介绍,对网格的由来、虚拟化思想的进化历程、网格与当前的WWW技术的关系、网格体系结构的演化以及网格技术发展的趋势等内容进行了重点的剖析,并简要论述了网格技术与空间信息技术的集成。     

确定边坡最危险滑动面的计算机模拟

边坡稳定性分析 ,关键是确定潜在的滑动面 ,目的是有利于工程安全。本文编制了二、三维计算机模拟程序 ,在二维模拟中提出了四种计算模式 ,三维模拟中考虑了空间、荷载、渗流效应 ,结合工程实例对边坡进行模拟并对土层抗剪强度参数进行了反演 ,模拟计算与实测结果吻合 ,模拟出的抗剪强度参数平均值与实测的抗剪强度参数标准值相当