华北东部地幔改造作用和置换作用:单斜辉石激光探针研究

对山东蒙阴古生代金伯利岩中石榴石方辉橄榄岩、河南鹤壁新生代玄武岩中 铬尖晶石方辉橄榄岩、山东栖霞新生代玄武岩中央晶石二辉橄榄岩和山东山旺新生代 玄武岩中尖晶石（富ＣｐＸ）二辉橄榄岩单斜辉石的常量、微量元素的研究和对比表明：华 北地块古生代稳定存在的克拉通岩石圈地幔在中、新生代其东部被具大洋地幔性质的 显生宙地幔不均匀地发生了置换作用,残存于南北重力梯度带（岩石圈减薄过渡带）上 的鹤壁浅部克拉通地幔除保存有置换作用前改造作用的丰富信息外,也包含有其深部 被置换后的地幔改造作用信息;郯庐断裂带东部栖霞的新生地幔仍保留有较多的大洋 地幔成分特征,而郯庐断裂带内山旺的新生地幔受后续地幔改造作用的影响有向大陆 地幔演化的趋向．发生于华北地块东部中、新生代的岩石圈巨厚减薄作用与地幔的置换 作用有关,由渐进的富ＣＯ_２流体或碳酸岩熔体对岩石圈地幔的交代改造作用以及由此 所引起的熔体抽取作用是完成新生地幔对古老地幔置换作用的关键．郯庐断裂带等岩 石圈深大断裂为地幔改造作用和地幔置换作用提供了良好的通道作用．     

人工侧向冻结条件下土的冻结试验

在人工侧向冻结、正弦和恒温2种冻结温度、开放和封闭条件下,对含水率为32 %的重塑粉质黏土进行了4组冻结试验。结果表明,补水条件相同时侧向正弦冻结试样的冻结速度比封闭正弦冻结试验的缓慢,当其冻结状态进入稳态之后,试样的整体温度场随着侧向冻结温度的正弦变化而出现相应的波动,但径向各段的温度梯度的相位滞后于正弦温度相位半个周期;正弦冻结试样与恒温冻结试样在同一条件下的冻胀量相近,封闭体系下自上而下轴向冻结试样的冻胀量高于同条件下侧向冻结试样的冻胀量;人工冻结工程中应考虑大气环境温度变化（如昼夜温差）及冷能侧向输入土体内时对冻土温度场的变化的影响。     

Occurrence and characteristics of sporadic sodium layer observed by lidar at a mid-latitude location

Na lidar observations of SSL during the past 5 years at a mid-latitude location (Wuhan, China, 31°N, 114°E) are reported in this paper. From 26 SSL events detected in about 230 h of observation, an SSL occurrence rate of 1 event/9 h at our location was obtained. This result, combined with that reported by Nagasawa and Abo (Geophys. Res. Lett. 22 (1995) 263) at Tokyo, Japan, reveals that the SSL occurrence can be relatively frequent at some mid-latitude locations. The statistical analyses of main parameters for the 26 SSL events were made, and the results were compared with those previously reported. By examining the corresponding data from a nearby ionosonde, it was found that there was a fairly good correlation between SSL and Es. Of the 18 pairs of SSL and Es events checked, 15 of SSL were accompanied by Es, and 8 pairs of them were correlated within 1 h in time and within 5 km in altitude. From the analyses of observed perturbations during SSL development, the role of dynamic processes of atmosphere in the SSL formations were emphasized.     

Finite element analysis for a finite conductivity fracture in an infinite poroelastic medium

In the technology of oil recovery, oil production rate can be increased by generation of a vertical conductive fracture adjacent to the well-bore. In this paper the seepage flow and isothermal deformation in both the oil formation and the fracture are studied by modelling the formation as a two-dimensional infinite poroelastic medium and the conductive fracture as a one-dimensional poroelastic material, saturated by a one-phase compressible fluid. The plane strain condition is employed. Solutions for a growing conductive fracture and a stationary conductive fracture in the infinite medium are obtained by means of the finite element method based on a variational principle for the formation which can impose the governing equations of the fracture. Infinite elements are used outside the finite element domain. Numerical results indicate that the injection rate, the applied pressure and the crack mouth opening displacement at the well-bore oscillate during the propagation of the conductive fracture. The production rate of a well with the conductive fracture is compared with that of a well without the conductive fracture. Finally, a new definition of the conductivity coefficient for the conductive fracture is presented. Copyright © 1999 John Wiley & Sons, Ltd.     

On the sampling of airborne measurements of radiative properties of cloud fields: Results from International Cirrus Experiment (ICE), 1987

Summary During the first pilot phase of the International Cirrus Experiment (ICE) in September/October 1987 radiation measurements were carried out above and below broken cloud fields over the German Bight. Analyses of the measurements of 25.9.1987 (broken cumulus cloud field) showed an unexpected high absorption of solar radiation but not those of 28.9.1987 (stratocumulus/stratus cloud field). This might be explained by a partial negligence of cloud side factor under the viewing geometry of the pyranometer and other reasons. The light guide effect (leakage) within holes can account for the depletion of cloud reflectance and the enhancement of cloud transmittance at large cloud cover, as observed during the measurements on 28.9.1987. The fluctuation of the irradiances, which can be characterized by the intermittency parameter, has been related to the corresponding cloud cover by a regression equation. On the condition of similarity, this scaling parameter derived from sample measurements could be extrapolated to that of the whole cloud field. Thus, the estimation of the irradiance spectrum for the whole cloud field may be possible, from samples taken with aircraft and imaging data.With 5 Figures     

Nature of the small main belt Asteroid 3169 Ostro

We present a set of rotational lightcurve measurements of the small main belt Asteroid 3169 Ostro. Our observations reveal an unambiguous, double-peaked rotational lightcurve with a peak-to-peak variation up to 1.2±0.05 mag and a synodic period of 6.509±0.001 h. From the large flux variation and the overall shape of the lightcurves, we suggest that 3169 Ostro could be a tightly bound binary or a contact binary, similar to the Trojan Asteroid 624 Hektor. A shape model of this system is proposed on the assumption that 3169 Ostro is a Roche binary described by a pair of homogeneous elongated bodies, with a size ratio of 0.87, in hydrostatic equilibrium and in circular synchronous motion around each other. The direction of the spin axis is determined modulo 180° by its J2000 ecliptic coordinates λ₀=50±10°, β₀=±54±5°. The binary interpretation and the pole solution adequately fit the earlier photometric observations made in 1986 and 1988. However, additional supporting lightcurves are highly desirable especially in the next mutual events occurrence of 2008 and 2009 in order to remove the pole ambiguity and to confirm unambiguously the binary nature of 3169 Ostro.     

Rock physics template (RPT) analysis of well logs and seismic data for lithology and fluid classification in Cambay Basin

The Cambay Basin is 450-km-long north–south-trending graben with an average width of 50 km, having maximum depth of about 7 km. The origin of the Cambay and other Basins on the western margin of India are related to the break up of the Gondwana super-continent in the Late-Triassic to Early-Jurassic (215 ma). The structural disposition of the Pre-Cambrian basement—a complex of igneous and metamorphic rocks exposed in the vicinity of the Cambay Basin—controls its architecture. The principal lineaments in the Basin are aligned towards NE-SE, ENE-WSW and NNW-SSE, respectively. Rock physics templates (RPTs) are charts and graphs generated by using rock physics models, constrained by local geology, that serve as tools for lithology and fluid differentiation. RPT can act as a powerful tool in validating hydrocarbon anomalies in undrilled areas and assist in seismic interpretation and prospect evaluation. However, the success of RPT analysis depends on the availability of the local geological information and the use of the proper model. RPT analysis has been performed on well logs and seismic data of a particular study area in mid Cambay Basin. Rock physics diagnostic approach is adopted in the study area placed at mid Cambay Basin to estimate the volume in the reservoir sands from 6 wells (namely; A, B, C, D, E and F) where oil was already encountered in one well, D. In the study area, hydrocarbon prospective zone has been marked through compressional (P wave) and shear wave (S wave) impedance only. In the RPT analysis, we have plotted different kinds of graphical responses of Lame’s parameters, which are the function of P-wave velocity, S-wave velocity and density. The discrete thin sand reservoirs have been delineated through the RPT analysis. The reservoir pay sand thickness map of the study area has also been derived from RPT analysis and fluid characterization. Through this fluid characterization, oil-bearing thin sand layers have been found in well E including well D. The sand distribution results prove that this methodology has able to perform reservoir characterization and seismic data interpretation more quantitatively and efficiently.     

SHRIMP zircon dating and Nd isotopic systematics of Palaeoproterozoic migmatitic orthogneisses in the Epupa Metamorphic Complex of northwestern Namibia

The Epupa Metamorphic Complex constitutes the southwestern margin of the Congo Craton and is exposed in a hilly to mountainous terrain of northwestern Namibia, bordering the Kunene River and extending into southern Angola. It consists predominantly of granitoid gneisses which are migmatized over large areas. This migmatization locally led to anatexis and produced crustal-melt granites such as the Otjitanda Granite. We have undertaken reconnaissance geochemical studies and single zircon U–Pb SHRIMP and Pb–Pb evaporation dating of rocks of the Epupa Complex. The granitoid gneisses, migmatites and anatectic melts are similar in composition and constitute a suite of metaluminous to peraluminous, calc-alkaline granitoids, predominantly with volcanic arc geochemical signatures. The zircon protolith ages for the orthogneisses range from 1861 ± 3 to 1758 ± 3 Ma. Anatexis in the migmatitic Epupa gneisses was dated from a melt patch at 1762 ± 4 Ma, and the anatectic Otjitanda Granite has a zircon age of 1757 ± 4 Ma. Migmatization and anatexis therefore occurred almost immediately after granitoid emplacement and date a widespread high-temperature Palaeoproterozoic event at ∼1760 Ma which has not been recorded elswhere in northern Namibia. The Nd isotopic systematics of all dated samples are surprisingly similar and suggest formation of the protolith from a source region that probably separated from the depleted mantle about 2.4–2.0 Ga ago. A major Archaean component in the source area is unlikely.     

Site effect on vulnerability of high-rise shear wall buildings under near and far field earthquakes

Worldwide experience repeatedly shows that damages in structures caused by earthquakes are highly dependent on site condition and epicentral distance. In this paper, a 21-storey shear wall-structure built in the 1960s in Hong Kong is selected as an example to investigate these two effects. Under various design earthquake intensities and for various site conditions, the fragility curves or damage probability matrix of such building is quantified in terms of the ductility factor, which is estimated from the ratio of storey yield shear to the inter-storey seismic shear. For high-rise buildings, a higher probability of damage is obtained for a softer site condition, and damage is more severe for far field earthquakes than for near field earthquakes. For earthquake intensity of VIII, the probability of complete collapse (P) increases from 1 to 24% for near field earthquakes and from 1 to 41% for far field earthquakes if the building is moved form a rock site to a site consisting a 80 m thick soft clay. For intensity IX, P increases from 6 to 69% for near field earthquake and from 14 to 79% for far field earthquake if the building is again moved form rock site to soft soil site. Therefore, site effect is very important and not to be neglected. Similar site and epicentral effects should also be expected for other types of high-rise structures.     

Measurement of stress effects (scope for growth) and contaminant levels in mussels (Mytilus edulis) collected from the Irish Sea

The objective of this research was to quantify the impact of pollution along the coastlines of the Irish Sea. Pollution assessment was based on the combined measurement of scope for growth (SFG), and chemical contaminants in the tissues of mussels (Mytilus edulis) collected from 38 coastal sites around the Irish Sea during June-July in 1996 and 1997. On the UK mainland coast, the SFG showed a general trend with a significant decline in water quality in the Liverpool and Morecambe Bay region. High water quality was recorded along the west coast of Wales, as well as southwest England and northwest Scotland (clean reference sites outside the Irish Sea). Along the coast of Ireland there was a similar trend with reduced SFG within the Irish Sea region. SFG was generally low north of Duncannon and then improved north of Belfast. The poor water quality on both sides of the Irish Sea is consistent with the prevailing hydrodynamics and the spatial distribution of contaminants associated with urban/ industrial development. The decline in SFG of mussels on both sides of the Irish Sea was associated with a general increase in contaminant levels in the mussels. Certain contaminants, including PAHs, TBT, sigmaDDT, Dieldrin, gamma-HCH, PCBs, and a few of the metals (Cd, Se, Ag, Pb), showed elevated concentrations. Many of these contaminants were particularly elevated in the coastal margins of Liverpool Bay, Morecambe Bay and Dublin Bay. A quantitative toxicological interpretation (QTI) of the combined tissue residue chemistry and SFG measurements indicated that at the majority of coastal sites, c. 50 to > 80% of the observed decline in SFG was due to PAHs as a result of fossil fuel combustion and oil spills. TBT levels were highest at major ports and harbours, but these concentrations only made a minor contribution to the overall reduction in SFG. At no sites were individual metals accumulated to concentrations that could cause a significant effect on SFG. The study identified many sites where the observed reduction in SFG was far greater than predicted from the limited number of chemical contaminants analysed, thus indicating the presence of additional 'unknown toxicants'. Sewage (containing domestic, agricultural and industrial components) appears to be an important contributor to reduced SFG and linear alkylbenzenes (LABs) and As may provide suitable 'sewage markers'. There was a highly significant positive correlation between SFG and As (P < 0.001). This relationship may be due to reduced As uptake by algal food material and mussels at sites with elevated P04 concentrations (e.g. at sites with sewage inputs). Phosphate is a known competitive inhibitor of As accumulation, at least in algae. The results highlight that further research is required on 'sewage markers' in mussels. The SFG approach therefore provides a rapid, cost-effective and quantitative measure of pollution impact, as well as a means of identifying the causes through a QTI of tissue contaminants levels. It also serves to identify the presence of unidentified toxicants and areas that require further study.