The Petrology and Geochemistry of Calc-Alkaline Andesites on Shodo-Shima Island, SW Japan

Petrographical and geochemical characteristics of calc-alkalineandesites on Shodo-Shima Island, SW Japan, having bulk compositionslargely identical to the continental crust, are presented. Thefollowing petrographic observations suggest a role for magmamixing in producing such andesite magmas: (1) two types of olivinephenocrysts and spinel inclusions, one with compositions identicalto those in high-Mg andesites and the other identical to thosein basalts, are recognized in terms of Ni–Mg and Cr–Al–Fe³⁺relations, respectively; (2) the presence of orthopyroxene phenocrystswith mg-number >90 suggests the contribution of an orthopyroxene-bearinghigh-Mg andesite magma to production of calc-alkaline andesites;(3) reversely zoned pyroxene phenocrysts may not be in equilibriumwith Mg-rich olivine, suggesting the involvement of a differentiatedandesite magma as an endmember component; (4) the presence ofvery Fe-rich orthopyroxene phenocrysts indicates the associationof an orthopyroxene-bearing rhyolitic magma. Contributions fromthe above at least five endmember magmas to the calc-alkalineandesite genesis can also provide a reasonable explanation ofthe Pb–Sr–Nd isotope compositions of such andesites. KEY WORDS: calc-alkaline andesites; high-Mg andesites; magma mixing; continental crust; SW Japan     

Rates of Deglaciation during the Last Glaciation and Holocene in the Cordillera Vilcanota-Quelccaya Ice Cap Region, Southeastern Perú

Moraine chronology is combined with digital topography to model deglacial rates of paleoglacier volumes in both the Huancané Valley on the west side of the Quelccaya Ice Cap and the Upismayo Valley on the northwest side of the Cordillera Vilcanota. The fastest rates of deglaciation (39×10⁻⁵ to 114×10⁻⁵ km³ yr⁻¹ and 112×10⁻⁵ to 247×10⁻⁵ km³ yr⁻¹ for each valley, respectively) were calculated for the most recent paleoglaciers, corresponding to the last few centuries. These results are consistent with observations in the Venezuelan Andes showing high rates of deglaciation since the Little Ice Age. These rates also fall within the range of 20th century rates of deglaciation measured on the Quelccaya Ice Cap (29×10⁻⁵ to 220×10⁻⁵ km³ yr⁻¹, Brecher and Thompson, 1993; Thompson, 2000). These results imply that rates of deglaciation may fluctuate significantly over time and that high rates of deglaciation may not be exclusive to the late 20th century. Equilibrium line altitude (ELA) depressions for the ice volumes of the last glaciation modeled here were computed as 230 m for the Quelccaya Ice Cap and 170 m for the Cordillera Vilcanota. Maximum ELA depressions are lower than previously published: <500 m for the Cordillera Vilcanota and <400 m for the Quelccaya Ice Cap. These lower values could imply a topographic control over paleoglacier extent.     

Crack damage stress as a composite function of porosity and elastic matrix stiffness in dolomites and limestones

Twenty-five uniaxial compression tests were performed to determine stress at onset of dilation, referred to herein as “the crack damage stress,” in heterogeneous dolomites and limestones. A simplified model for crack damage stress (σ_cd) is developed here using porosity, elastic modulus, Poisson's ratio and three empirical coefficients. The model shows that when porosity decreases and elastic modulus increases, σ_cd rapidly increases and approaches its maximum value. On the other hand, when porosity increases and elastic modulus decreases, σ_cd rapidly decreases and approaches its minimum value. The proposed model is validated for six heterogeneous limestone and dolomite formations which are widely distributed in Israel.     

Origin of spongy textures in clinopyroxene and spinel from mantle xenoliths, Hessian Depression, Germany

Summary Spongy textures are observed in anhydrous Group 1 mantle xenoliths (harzburgite, lherzolite and wehrlite) hosted in Tertiary alkali basaltic lavas from the Hessian Depression, Germany. These textures are developed only on clinopyroxene and spinel, and occur as rims or cross-cutting veinlets and patches showing optical continuity with the host grain. They are often associated with pools of amorphous glassy material. There is no preferential development of spongy domains against the xenolith-lava contact suggesting that the host magma did not play any significant role in their formation. Spongy clinopyroxene and spinel occur in all rock types, but, are more pervasive in wehrlite. Chemically, spongy domains of clinopyroxene and spinel are more refractory than unaffected areas, which is consistent with their formation through a partial melting event. The associated glassy material shows chemical characteristics which suggest that the melt pools are genetically related to the development of the spongy textures. The partial melting event was probably triggered by the infiltration of a low-density fluid. The fluid may have evolved from a silicate melt responsible for the metasomatic Fe-enrichment recorded in wehrlite. In this context, the more pervasive development of spongy clinopyroxene in wehrlite may be explained by a higher concentration of the evolved fluid phase at proximity to its silicate melt source. Received March 15, 2000; revised version accepted September 6, 2001     

Landslide risk assessment and management: an overview

Landslides can result in enormous casualties and huge economic losses in mountainous regions. In order to mitigate landslide hazard effectively, new methodologies are required to develop a better understanding of landslide hazard and to make rational decisions on the allocation of funds for management of landslide risk. Recent advances in risk analysis and risk assessment are beginning to provide systematic and rigorous processes to enhance slope management. In recent years, risk analysis and assessment has become an important tool in addressing uncertainty inherent in landslide hazards.This article reviews recent advances in landslide risk assessment and management, and discusses the applicability of a variety of approaches to assessing landslide risk. Firstly, a framework for landslide risk assessment and management by which landslide risk can be reduced is proposed. This is followed by a critical review of the current state of research on assessing the probability of landsliding, runout behavior, and vulnerability. Effective management strategies for reducing economic and social losses due to landslides are described. Problems in landslide risk assessment and management are also examined.     

In situ measurement of Re-Os isotopes in mantle sulfides by laser ablation multicollector-inductively coupled plasma mass spectrometry: analytical methods and preliminary results

A method has been developed for the in situ determination of Re-Os isotopes in single grains of sulfides in mantle-derived peridotites using a laser ablation microprobe attached to a multicollector-induced coupled plasma mass spectrometer (MC-ICPMS). High-precision Os isotope analysis by MC-ICPMS is demonstrated by the measurement of interlaboratory Os standards. Evaluation of mass bias correction procedures shows that the exponential law provides the best fit to the Os isotope data and that the ratio of the mass fractionation coefficients for Re and Os remains constant for the range of typical instrument operating conditions. This relationship enables the accurate and precise correction of the isobaric interference of ¹⁸⁷Re on ¹⁸⁷Os for ¹⁸⁷Re/¹⁸⁸Os values up to 1.6.Results are presented for single sulfide inclusions in olivine macrocryts from kimberlites in the Siberian and Slave Cratons, and sulfides enclosed in silicates and interstitial to silicates in peridotite xenoliths from the Slave Craton and Massif Central, France. Enclosed sulfides larger than 50 μm in diameter and with Os contents ≥40 ppm give ¹⁸⁷Os/¹⁸⁸Os ratios with a precision of 0.1% (2 SE), which is equivalent to N-TIMS whole-rock data. Interstitial sulfides typically have lower Os (10 to 30 ppm) and give analyses with lower precision (∼1 to 2%) but still provide valuable information on the movement of Os within the lithosphere. The sulfide inclusions in silicates preserve significantly less radiogenic Os isotopic compositions than interstitial sulfides and accordingly produce significantly older and more realistic Re-Os age information. Whole-rock Os isotope compositions reflect the proportions of different generations of enclosed and interstitial sulfides; this calls into question the significance of many published “depletion ages.”     

Structural relaxation in the MnCO3–CaCO3 solid solution: a Mn K-edge EXAFS study

Mn K-edge EXAFS spectroscopy of solid-solution samples encompassing the complete MnCO₃–CaCO₃ series shows that first-shell Mn–O distances deviate little from the 2.19-Å distance observed in pure MnCO₃. Very slight lengthening is observed only in the limiting case of dilute Mn(II) calcite solid solutions, where the Mn–O distance is 2.21 Å. The observed nearly complete structural relaxation and the composition independence of the Mn–O distance are consistent with the Pauling model behavior of solid solutions, and agree with previous studies showing a high degree of relaxation around hetero-sized substituents in the calcite structure. Strain occurs through bond bending, which is facilitated by the exclusively corner-sharing topology of calcite. Observed distances from Mn to more distant neighbors show significant variation across the solid-solution series that resembles Vegard's law-type behavior but reflects averaging. The high degree of relaxation suggests modest enthalpies of mixing in the solution, consistent with calorimetric studies.     

湖南印支期过铝质花岗岩的形成: 岩浆底侵与地壳加厚热效应的数值模拟

在合理构建华南印支期地质-物理模型的基础上, 利用FLAC软件, 模拟了该区印支期过铝质富钾花岗岩形成与基性岩浆底侵, 及陆壳变形叠置加厚两种动力学背景的可能联系. 模拟结果表明, 220 Ma±的基性岩浆底侵能导致地壳含水矿物相岩石的深熔, 但除非印支期存在大规模基性岩浆的底侵作用, 否则其热效应持续时间和热效应波及范围难以形成具大岩基规模的湖南印支期花岗岩. 在陆壳叠置加厚模型中, 地壳的叠置加厚可导致中下地壳界面温度升高到700℃以上, 引起片麻质岩石熔融, 当加厚因子达1.3, 白云母矿物脱水熔融产生的熔体达到熔体流动临界比例(≥20%), 从而形成花岗岩基; 结合印支期挤压逆冲推覆构造和同期基性火山岩极少出露的地质事实, 认为陆壳变形加厚可能是湖南印支期构造岩浆作用形成的主导因素.     

Mathematical modeling of PCB bioaccumulation in Perna viridis

In the present work, we built a mathematical model of polychlorinated biphenyl (PCB) bioaccumulation in Perna viridis, namely, a one-compartment model with a time dependent incorporation rate R (μg g⁻¹ lipid per ppb water per day), with positive substrate cooperativity as the underlying physical mechanism. The temporal change of the PCB concentration Q (μg g⁻¹ lipid) in the soft tissues of the mussel depends on the competition of the input rate RW and the output rate kQ, where W is the concentration of PCB in water (ppb water) and k is the elimination rate (per day). From our experimental data, k=0.181±0.017 d⁻¹. The critical concentration in water W_c for positive substrate cooperativity was found to be 2.4 ppb. Below W_c, R is a constant. For a water concentration of 0.5 ppb Aroclor 1254, R=24.0±2.4 μg g⁻¹ lipid ppb⁻¹ d⁻¹. Above W_c, positive substrate cooperativity comes into effect and R becomes a function of time and dependent on the concentration Q in a form R=γQ/(Q+δ). This is the case for a water concentration of 5 ppb Aroclor 1254, where γ=15.1 μg g⁻¹ lipid ppb⁻¹ d¹ and δ≈200 μg g⁻¹ lipid. From this model, the uptake is exponentially increasing when the PCB concentration in the mussel is small compared to 200 μg g⁻¹ lipid, and hyperbolically increasing when the concentration is large compared to 200 μg g⁻¹ lipid, which are consistent with the experimental data. The model is useful for understanding the true processes taking place during the bioaccumulation and for risk assessment with higher confidence. Future experimental data which challenge the present model are anticipated and in fact desirable for improvement and perfection of the model.