Grain alignment in dense interstellar environments: spectropolarimetry of the 4.67-μm CO-ice feature in the field star Elias 16 (Taurus dark cloud)

We present spectropolarimetry of the solid CO feature at 4.67 μm along the line of sight to Elias 16, a field star background to the Taurus dark cloud. A clear increase in polarization is observed across the feature with the peak of polarization shifted in wavelength relative to the peak of absorption. This shows that dust grains in dense, cold environments (temperatures ∼20 K or less) can align and produce polarization by dichroic absorption. For a grain model, consisting of a core with a single mantle, the polarization feature is best modelled by a thick CO mantle, possibly including 10 per cent water-ice, with the volume ratio of mantle to bare grain of ∼5. Radiative torques could be responsible for the grain alignment provided the grain radius is at least 0.5 μm. This would require the grain cores to have a radius of at least 0.3 μm, much larger than grain sizes in the diffuse interstellar medium. Sizes of this order seem reasonable on the basis of independent evidence for grain growth by coagulation, as well as mantle formation, inside dense clouds.     

In situ thermal conductivity measurements of Titan's lower atmosphere

Thermal conductivity measurements, presented in this paper (Fig. 3), were made during the descent of the Huygens probe through the atmosphere of Titan below the altitude of 30 km. The measurements are broadly consistent with reference values derived from the composition, pressure and temperature profiles of the atmosphere; except in narrow altitude regions around 19 km and 11 km, where the measured thermal conductivity is lower than the reference by 1% and 2%, respectively. Only single data point exists at each of the two altitudes mentioned above; if true however, the result supports the case for existence for molecules heavier than nitrogen in these regions (such as: ethane, other primordial noble gases, carbon dioxide, and other hydrocarbon derivatives). The increasing thermal conductivity observed below 7 km altitude could be due to some liquid deposition during the descent; either due to condensation and/or due to passing through layers of fog/cloud containing liquid nitrogen-methane. Thermal conductivity measurements do not allow conclusions to be drawn about how such liquid may have entered the sensor, but an estimate of the cumulative liquid content encountered in the last 7 km is 0.6% by volume of the Titan's atmosphere sampled during descent.     

Ion and neutral sources and sinks within Saturn's inner magnetosphere: Cassini results

Using ion-electron fluid parameters derived from Cassini Plasma Spectrometer (CAPS) observations within Saturn's inner magnetosphere as presented in Sittler et al. [2006a. Cassini observations of Saturn's inner plasmasphere: Saturn orbit insertion results. Planet. Space Sci., 54, 1197-1210], one can estimate the ion total flux tube content, N_IONL², for protons, H⁺, and water group ions, W⁺, as a function of radial distance or dipole L shell. In Sittler et al. [2005. Preliminary results on Saturn's inner plasmasphere as observed by Cassini: comparison with Voyager. Geophys. Res. Lett. 32(14), L14S04), it was shown that protons and water group ions dominated the plasmasphere composition. Using the ion-electron fluid parameters as boundary condition for each L shell traversed by the Cassini spacecraft, we self-consistently solve for the ambipolar electric field and the ion distribution along each of those field lines. Temperature anisotropies from Voyager plasma observations are used with (T_⊥/T_∥)_W⁺∼5 and (T_⊥/T_∥)_H⁺∼2. The radio and plasma wave science (RPWS) electron density observations from previous publications are used to indirectly confirm usage of the above temperature anisotropies for water group ions and protons. In the case of electrons we assume they are isotropic due to their short scattering time scales. When the above is done, our calculation show N_IONL² for H⁺ and W⁺ peaking near Dione's L shell with values similar to that found from Voyager plasma observations. We are able to show that water molecules are the dominant source of ions within Saturn's inner magnetosphere. We estimate the ion production rate S_ION∼10²⁷ ions/s as function of dipole L using N_H⁺, N_W⁺ and the time scale for ion loss due to radial transport τ_D and ion-electron recombination τ_REC. The ion production shows localized peaks near the L shells of Tethys, Dione and Rhea, but not Enceladus. We then estimate the neutral production rate, S_W, from our ion production rate, S_ION, and the time scale for loss of neutrals by ionization, τ_ION, and charge exchange, τ_CH. The estimated source rate for water molecules shows a pronounced peak near Enceladus’ L shell L∼4, with a value S_W∼2×10²⁸ mol/s.     

Upstream proton cyclotron waves at Venus

Data from the magnetometer MAG aboard the Venus Express S/C are investigated for the occurrence of cyclotron wave phenomena upstream of the Venus bow shock. For an unmagnetized planet such as Venus and Mars the neutral exosphere extends into the on-flowing solar wind and pick-up processes can play an important role in the removal of particles from the atmosphere. At Mars upstream proton cyclotron waves were observed but at Venus they were not yet detected. From the MAG data of the first 4 months in orbit we report the occurrence of proton cyclotron waves well upstream from the planet, both outside and inside of the planetary foreshock region; pick-up protons generate specific cyclotron waves already far from the bow shock. This provides direct evidence that the solar wind is removing hydrogen from the Venus exosphere. Determining the role the solar wind plays in the escape of particles from the total planetary atmosphere is an important step towards understanding the evolution of the environmental conditions on Venus. The continual observations of the Venus Express mission will allow mapping the volume of escape more accurately, and determine better the present rate of hydrogen loss.     

Statistical inference in the presence of an inclination effect in laboratory radiative shock experiments

A laser-driven experiment produces images of dense shocked material by x-ray transmission. The post-shock material is sufficiently dense that no significant signal passes through the dense layer, and therefore the shock compression cannot be directly measured by comparing transmitted intensities. One could try to determine the shock compression ratio by observing the ratio of the total distance travelled by the shock to the dense post-shock layer width, but small deviations of the angle of the shock with respect to the angle of imaging create large asymmetric errors in observation. A statistical approach to recovering shock compression by appropriately combining data from several experiments is developed, using fits to a simple model for the shock and shock tube geometry.     

The central point source in G76.9+1.0

We describe the serendipitous discovery of a very steep-spectrum radio point source in low-frequency Giant Metrewave Radio Telescope (GMRT) images of the supernova remnant (SNR) G76.9+1.0. The steep spectrum, as well as the location of the point source near the centre of this SNR confirm that this indeed is the pulsar J2022+3842. Archival Chandra X-ray data shows a point source coincident with the radio point source. However, no pulsed radio emission was detected despite deep searches at 610 MHz and 1160 MHz – which can be understood to be due to temporal broadening of the pulses. Weak pulsed emission has indeed been seen at 2 GHz with the Green Bank Telescope (GBT), establishing the fact that scattering is responsible for its non-detection at low radio frequencies. We underline the usefulness of low-frequency radio imaging as a good technique to prospect for pulsar candidates.     

The Global Context of Solar Activity During the Whole Heliosphere Interval Campaign

The Whole Heliosphere Interval (WHI) was an international observing and modeling effort to characterize the 3-D interconnected ??heliophysical?? system during this solar minimum, centered on Carrington Rotation 2068, March 20??C?April 16, 2008. During the latter half of the WHI period, the Sun presented a sunspot-free, deep solar minimum type face. But during the first half of CR 2068 three solar active regions flanked by two opposite-polarity, low-latitude coronal holes were present. These departures from the quiet Sun led to both eruptive activity and solar wind structure. Most of the eruptive activity, i.e., flares, filament eruptions and coronal mass ejections (CMEs), occurred during this first, active half of the interval. We determined the source locations of the CMEs and the type of associated region, such as active region, or quiet sun or active region prominence. To analyze the evolution of the events in the context of the global solar magnetic field and its evolution during the three rotations centered on CR 2068, we plotted the CME source locations onto synoptic maps of the photospheric magnetic field, of the magnetic and chromospheric structure, of the white light corona, and of helioseismological subsurface flows. Most of the CME sources were associated with the three dominant active regions on CR 2068, particularly AR 10989. Most of the other sources on all three CRs appear to have been associated with either isolated filaments or filaments in the north polar crown filament channel. Although calculations of the flux balance and helicity of the surface magnetic features did not clearly identify a dominance of one region over the others, helioseismological subsurface flows beneath these active regions did reveal a pronounced difference among them. These preliminary results suggest that the ??twistedness?? (i.e., vorticity and helicity) of subsurface flows and its temporal variation might be related to the CME productivity of active regions, similar to the relationship between flares and subsurface flows.     

Modelling the IDV Emissions of the BL Lac Objects with a Langevin Type Stochastic Differential Equation

In this paper, we introduce a simplified model for explaining the observations of optical intra-day variability (IDV) of the BL Lac Objects. We assume that the source of the IDV are the stochastic oscillations of an accretion disk around a supermassive black hole. The stochastic fluctuations on the vertical direction of the accretion disk are described by using a Langevin type equation with a damping term and a random, white noise type force. Furthermore, preliminary numerical simulation results are presented, which are based on the numerical analysis of the Langevin stochastic differential equation.     

The thermal structure and the location of the snow line in the protosolar nebula: Axisymmetric models with full 3-D radiative transfer

The precise location of the water ice condensation front (‘snow line’) in the protosolar nebula has been a debate for a long time. Its importance stems from the expected substantial jump in the abundance of solids beyond the snow line, which is conducive to planet formation, and from the higher ‘stickiness’ in collisions of ice-coated dust grains, which may help the process of coagulation of dust and the formation of planetesimals. In an optically thin nebula, the location of the snow line is easily calculated to be around 3 AU, subject to brightness variations of the young Sun. However, in its first 5-10 myr, the solar nebula was optically thick, implying a smaller snowline radius due to shielding from direct sunlight, but also a larger radius because of viscous heating. Several models have attempted to treat these opposing effects. However, until recently treatments beyond an approximate 1 + 1D radiative transfer were unfeasible. We revisit the problem with a fully self-consistent 3D treatment in an axisymmetric disk model, including a density-dependent treatment of the dust and ice sublimation. We find that the location of the snow line is very sensitive to the opacities of the dust grains and the mass accretion rate of the disk. We show that previous approximate treatments are quite efficient at determining the location of the snow line if the energy budget is locally dominated by viscous accretion. Using this result we derive an analytic estimate of the location of the snow line that compares very well with results from this and previous studies. Using solar abundances of the elements we compute the abundance of dust and ice and find that the expected jump in solid surface density at the snow line is smaller than previously assumed. We further show that in the inner few AU the refractory species are also partly evaporated, leading to a significantly smaller solid state surface density in the regions where the rocky planets were formed.     

Monte Carlo modeling of neutral gas and dust in the coma of Comet 1P/Halley

The neutral gas environment of a comet is largely influenced by dissociation of parent molecules created at the surface of the comet and collisions of all the involved species. We compare the results from a kinetic model of the neutral cometary environment with measurements from the Neutral Mass Spectrometer and the Dust Impact Detection System onboard the Giotto spacecraft taken during the fly-by at Comet 1P/Halley in 1986. We also show that our model is in good agreement with contemporaneous measurements obtained by the International Ultraviolet Explorer, sounding rocket experiments, and various ground based observations.The model solves the Boltzmann equation with a Direct Simulation Monte Carlo technique (Tenishev, V., Combi, M., Davidsson, B. [2008]. Astrophys. J. 685, 659-677) by tracking trajectories of gas molecules and dust grains under the influence of the comet’s weak gravity field with momentum exchange among particles modeled in a probabilistic manner. The cometary nucleus is considered to be the source of dust and the parent species (in our model: H₂O, CO, H₂CO, CO₂, CH₃OH, C₂H₆, C₂H₄, C₂H₂, HCN, NH₃, and CH₄) in the coma. Subsequently our model also tracks the corresponding dissociation products (H, H₂, O, OH, C, CH, CH₂, CH₃, N, NH, NH₂, C₂, C₂H, C₂H₅, CN, and HCO) from the comet’s surface all the way out to 10⁶ km.As a result we are able to further constrain cometary the gas production rates of CO (13%), CO₂ (2.5%), and H₂CO (1.5%) relative to water without invoking unknown extended sources.