Sur quelques concentrations plombo-zinciferes du devonien inferieur du massif schisteux rhenan

Zusammenfassung The Lower Devonian of the Rhine Schist Massif is characterized by a fine detrital sedimentation which reflects a coastal plain environment located between the Old Red Sandstone continent in the N and the marine Bohemian Facies in the SE. Mineralisations are located within these coastal-plain sediments, especially in fractured horizons topped by pelitic and floored by sandy sediments of Sieg Emsian age. The mineralised localities occur in three zones: the districts of Bensberg, Eitorf and Mayen. The Lüderich locality (Bensberg) is the most important having approximately one million tons of Zn and Pb metal. It is localised within a zone having marked sedimentary characteristics since the Siegenian. Mineralisation occurs as penecontemporaneous lenses, fracture fillings etc, formed at abnormal contacts between lithological units having different competance during Siegenian and Lower Emsian deformation. However, locally there is lateral transition between the upper units of the sandy channel series and the lower units of the pelitic swamp facies. Vertical extension of mineralisations is strictly limited to the tectonic contact zone between the Odenspiel Sandstone and the Bensberg pelites. Study of mineralisations at various levels (mapping, morphology, structure, paragenetic and geochemical) leads to the formulation of a genetic model requiring complex fracturation at the contact between contrasting lithologies and preferential drainage through these fractured zones; metals are trapped on the sandstone floor, the pelitic roof trapping the vadose hydrothermal solutions. These basic controls seem to apply throughout the Bensberg, Eitorf and Mayen districts. On a more regional scale the age variations of the gangue sediments reflects a lateral displacement of red/grey facies limits due to coastal evolution. Thus one may demonstrate a type of mineral occurrence whose model may be that of epigenetic reconcentration within fractures affecting syngenetic geochemical anomalies.Zusammenfassung Das Unterdevon des Rheinischen Schiefergebirges wird durch eine feinkörnige detritische Sedimentation gekennzeichnet. Die Verteilung dieser detritischen Sedimente widerspiegelt eine flache Küstenlandschaft zwischen dem Kontinent des Unterrotliegenden im Norden und des Meeres mit der Böhmischen Fazies im Südosten. In diesen Schichten befinden sich gangförmige Vererzungen, die in Bruchzonen auftreten, die ein pelitisches Hangendes und ein sandsteinreiches Liegendes vom Siegen-Ems Alter haben. Die Lagerstätten kommen in drei Bezirken vor: Der Bensberger Bezirk, der Bezirk Eitorf und der Bezirk Mayen. Die Lagerstätte Lüderich (Bensberger Revier) ist die größte (ungefähr eine Million Tonnen Metall Zink+Blei). Sie befindet sich in einer Zone, in der schon in der Siegen-Stufe bemerkenswerte sedimentäre Strukturen auftreten. Die Vererzung tritt als penekonkordante Linsen, Gänge, Stockwerke in tektonischen Kontaktzonen auf. Diese Kontaktzonen befinden sich zwischen 2 verschiedenen sedimentären Einheiten, deren Gesteinseigenschaften sehr verschieden sind. Es handelt sich um Pelite mit Sandstein-Einschaltungen einerseits, die zur unteren Emsstufe gehören sollen und um fluviatile Sandsteine andererseits, die zur oberen Siegenstufe gehören sollen. Lokal ist ein lateraler Übergang durch Faziesänderung von den oberen Sandsteinen in die unteren Pelitschichten jedoch nicht unmöglich. Die Sandsteine vertreten einen fluviatilen Sedimentationsbereich, die Pelite einen sumpfigen Sedimentationsbereich. Die Vererzung (mit einer vertikalen Ausdehnung ungefähr von 300 m) tritt nur im Bereich der Kontaktzone zwischen den Odenspieler Sandsteinen und den Peliten der Unteren Bensberger Schichten auf. Die Resultate der Kartographie, der morphologischen Studie der Erzkörper, der Struktur und der Paragenese führen zu einem genetischen Modell. Dabei spielt die Anwesenheit einer Bruchstruktur an der Grenze zwischen 2 Bereichen mit verschiedenen lithologischen Eigenschaften eine Hauptrolle für die Konzentration der im Hangenden fein verteilten Metalle. Die hydrothermalen Lösungen kommen demnach nicht von der Teufe, sondern aus dem Nebengestein. Im ganzen Bensberger Erzrevier wie in der Gegend von Eitorf und in der Gegend von Mayen finden wir dieselben Leitfäden für die Vererzung in den Lagerstätten und Vorkommen. Beobachtet man die ganze Provinz, dann merkt man, daß die Altersverschiedenheiten in den Nebengesteinen der verschiedenen Lagerstätten eine geographische Wanderung der Faziesgrenze zwischen rot und grau in dieser küstennahen Ebene Widerspiegeln. Die verschiedenen Vorkommen und Lagerstätten treten immer in unmittelbarer Nähe dieser Grenze auf. Die Eigenschaften dieser Lagerstätten weisen auf eine Bildung durch eine epigenetische Umlagerung in eine gangförmige Bruchstruktur hin.     

Climatic and geographic factors affect ecosystem multifunctionality through biodiversity in the Tibetan alpine grasslands

Ecosystem multifunctionality(EMF), the simultaneous provision of multiple ecosystem functions, is often affected by biodiversity and environmental factors. We know little about how the interactions between biodiversity and environmental factors affect EMF. In this case study, a structural equation model was used to clarify climatic and geographic pathways that affect EMF by varying biodiversity in the Tibetan alpine grasslands. In addition to services related to carbon, nitrogen, and water cycling, forage supply, which is related to plantproductivity and palatability, was included in the EMF index. The results showed that 72% of the variation in EMF could be explained by biodiversity and other environmental factors. The ratio of palatable richness to all species richness explained 8.3% of the EMF variation. We found that air temperature, elevation, and latitude all affected EMF, but in different ways. Air temperature and elevation impacted the aboveground parts of the ecosystem, which included plant height, aboveground biomass, richness of palatable species, and ratio of palatable richness to all species richness. Latitude affected EMF by varying both aboveground and belowground parts of the ecosystem, which included palatable speciesrichness and belowground biomass. Our results indicated that there are still uncertainties in the biodiversity–EMF relationships related to the variable components of EMF, and climatic and geographic factors. Clarification of pathways that affect EMF using structural equation modeling techniques could elucidate the mechanisms by which environmental changes affect EMF.     

Resolving the landfill siting impasse: modelling technocratic and indigenous perspectives using GIS multicriteria approach

Increase in waste generation calls for an effective waste management as this has become a necessity for environmental sustainability. Several methods are adopted in managing waste, which include waste reduction, reuse, thermal treatment, recycling and landfilling. The landfill method is recognised as the most used of all the waste management methods in developing countries such as Ghana. However, the selection of a suitable landfill site is very difficult and tedious. This is because it involves a consideration of many factors such as environmental, topographic, economic, socio-cultural and civil engineering. This research sought to identify a suitable landfill site by applying GIS multicriteria and weighted overlay approach in the Bongo District of Northern Ghana. The analysis relied on criteria and weights provided by the technocrats and the indigenes in the district as a way of demonstrating how landfill siting impasse can be resolved by incorporating the various stakeholders. The results obtained provided clear areas for landfill sites in the study area from the technocratic and the indigenous perspectives. However, the technocratic perspective failed to include an important cultural criterion, sacred groves, as a factor. The indigenous perspective also compromised on the factor related to nearness to residential areas, and is equally not sufficient on its own. The optimal landfill sites, which meets the expectations of both the technocrats and indigenes, was identified. This perspective has produced technically favourable and socio-culturally acceptable landfill site. However, it is recommended an environmental impact assessment (EIA) be conducted to identify the full environmental and social cost of the site. It is concluded that in landfill site selection much attention be given to cultural factors in the same way as the technical factors.     

Understanding the implications of the EU-LULUCF regulation for the wood supply from EU forests to the EU

Background

In June 2018, the European Parliament and Council of the European Union adopted a legislative regulation for incorporating greenhouse gas emissions and removals from Land Use, Land Use Change and Forestry (EU-LULUCF) under its 2030 Climate and Energy Framework. The LULUCF regulation aim to incentivise EU Member States to decrease greenhouse gas emissions and increase removals in the LULUCF sector. The regulation, however, does not set a target for increasing the LULUCF carbon sink, but rather includes a ‘no net debit’ target for LULUCF (Forests and Agricultural soils). For Managed Forest Land (MFL) an accounting framework with capped credits for additional mitigation against a set forest reference level (FRL) was agreed for 2021–2030. The FRL gives the projected future carbon sink in the two compliance periods 2021–2025 and 2026–2030 under “continuation of forest management practices as they were in the reference period 2000–2009”. This FRL was disputed by some Member States as it was perceived to put a limit on their future wood harvesting from MFL. Here we simulated with the EFISCEN European forest model the “continuation of forest management practices” and determined the corresponding wood harvest for 26 EU countries under progressing age classes.

Results

The simulations showed that under “continuation of forest management practices” the harvest (wood removals) in the 26 EU countries as a whole can increase from 420 million m³/year in 2000–2009 to 560 million m³/year in 2050 due to progressing age classes. This implies there is a possibility to increase absolute wood harvests without creating debits compared to the forest reference level. However, the manner in which ‘continuation of forest management’ developed with a progressing age class development over time, meant that in some countries the future harvesting exceeded 90% of the increment. Since this generally is considered to be unsustainable we additionally set a harvesting cut-off as max 90% of increment to be harvested for each individual country as a possible interpretation of sustainability criteria that are included in the regulation. Using this additional limit the projected harvest will only increase to 493 million m³/year.

Conclusions

The worry from Member States (MS) that the FRL will prevent any additional harvesting seems unwarranted. Due to differences between Member States concerning the state of their forest resources, the FRL as a baseline for harvesting works out very differently for the different Member States. The FRL may have other unforeseen consequences which we discuss. Under all scenarios the living forest biomass sink shows a decline. This can be counteracted through incentivising measures under Climate Smart Forestry.

     

Massive sedimentation of fine sediment with organic matter and enhanced benthic-pelagic coupling by an artificial dyke in semi-enclosed Chonsu Bay, Korea

To assess the impact of an artificial dyke in Chonsu Bay (CBD) on the organic carbon (C(org)) cycle, we measured excess (210)Pb activities, C(org) and nitrogen content in sediment cores. The C(org) oxidation rates (C(ox)) on the surface sediment and benthic nutrient fluxes were also quantified with an in situ benthic chamber. The higher excess (210)Pb inventory, C(org) and nitrogen in cores near the CBD indicated lateral transport and local, massive deposition of particulate matter due to tidal circulation altered by artificial dyke construction. The C(ox) in sediment near the CBD was about twice as high as that out of the bay, suggesting the importance of benthic remineralization of organic matter. The benthic fluxes of dissolved inorganic nitrogen and phosphate were four to six times higher than those outside the bay, corresponding to 141% and 131% respectively, of the requirements for primary production.     

Analysis of the positive ionospheric response to a moderate geomagnetic storm using a global numerical model

Current theories of F-layer storms are discussed using numerical simulations with the Upper Atmosphere Model, a global self-consistent, time dependent numerical model of the thermosphere-ionosphere-plasmasphere-magnetosphere system including electrodynamical coupling effects. A case study of a moderate geomagnetic storm at low solar activity during the northern winter solstice exemplifies the complex storm phenomena. The study focuses on positive ionospheric storm effects in relation to thermospheric disturbances in general and thermospheric composition changes in particular. It investigates the dynamical effects of both neutral meridional winds and electric fields caused by the disturbance dynamo effect. The penetration of short-time electric fields of magnetospheric origin during storm intensification phases is shown for the first time in this model study. Comparisons of the calculated thermospheric composition changes with satellite observations of AE-C and ESRO-4 during storm time show a good agreement. The empirical MSISE90 model, however, is less consistent with the simulations. It does not show the equatorward propagation of the disturbances and predicts that they have a gentler latitudinal gradient. Both theoretical and experimental data reveal that although the ratio of [O]/[N₂] at high latitudes decreases significantly during the magnetic storm compared with the quiet time level, at mid to low latitudes it does not increase (at fixed altitudes) above the quiet reference level. Meanwhile, the ionospheric storm is positive there. We conclude that the positive phase of the ionospheric storm is mainly due to uplifting of ionospheric F2-region plasma at mid latitudes and its equatorward movement at low latitudes along geomagnetic field lines caused by large-scale neutral wind circulation and the passage of travelling atmospheric disturbances (TADs). The calculated zonal electric field disturbances also help to create the positive ionospheric disturbances both at middle and low latitudes. Minor contributions arise from the general density enhancement of all constituents during geomagnetic storms, which favours ion production processes above ion losses at fixed height under day-light conditions.     

High-resolution satellite image segmentation using Hölder exponents

Texture in high-resolution satellite images requires substantial amendment in the conventional segmentation algorithms. A measure is proposed to compute the Hölder exponent (HE) to assess the roughness or smoothness around each pixel of the image. The localized singularity information is incorporated in computing the HE. An optimum window size is evaluated so that HE reacts to localized singularity. A two-step iterative procedure for clustering the transformed HE image is adapted to identify the range of HE, densely occupied in the kernel and to partition Hölder exponents into a cluster that matches with the range. Hölder exponent values (noise or not associated with the other cluster) are clubbed to a nearest possible cluster using the local maximum likelihood analysis.     

Automated mapping of rock slope geometry,kinematics and stability with RSS-GIS

A GIS-implemented, deterministic approach for the automated spatial evaluation of geometrical and kinematical properties of rock slope terrains is presented. Based on spatially distributed directional information on planar geological fabrics and DEM-derived topographic attribute data, the internal geometry of rock slopes can be characterized on a grid cell basis. For such computations, different approaches for the analysis and regionalization of available structural directional information applicable in specific tectonic settings are demonstrated and implemented in a GIS environment. Simple kinematical testing procedures based on feasibility criteria can be conducted on a pixel basis to determine which failure mechanisms are likely to occur at particular terrain locations. In combination with hydraulic and strength data on geological discontinuities, scenario-based rock slope stability evaluations can be performed. For conceptual investigations on rock slope failure processes, a GIS-based specification tool for a 2-D distinct element code (UDEC) was designed to operate with the GIS-encoded spatially distributed rock slope data. The concepts of the proposed methodology for rock slope hazard assessments are demonstrated at three different test sites in Germany.