A numerical method of viscoelastic finite element coupled with spring-block model to simulate the interaction of faults and crustal blocks

A numerical method of viscoelastic finite element coupled with spring-block model is developed to study temporal processes from the slow tectonic motion of large-scale crust to the rapid failure of small-scale faults. Our modeling demonstrates that the motion of crustal blocks is driven by forces from tectonic plate boundaries, and the deformation is distributed on faults for the stress accumulating. The coupling model generates earthquake sequences that display a magnitude-frequency scaling consistent with Gutenberg-Richter law. The frictional heterogeneities affeci earthquakes occurrence and stresses distribution of crustal blocks. Rupture of earthquakes starts at the nucleation node, and propagates bilaterally along faults with the stress triggering, release and redistribution. The failure of faults releases part of crustal stresses, the stress state of crustal blocks near fault is affected by the rupture of local segments on the fault, and the stress state of crustal blocks far away from the fault is controlled by the seismic activity of the whole fault.     

渭干河流域"2002·7"特大洪水分析

渭干河是塔里木河流域第六大源流, 位于天山西部南麓, 渭干河干流起点有新疆最大的流域性控制工程--克孜尔水库. 2002年7月下旬天山中西部山区出现大暴雨(雪)过程, 渭干河流域山区降水持续时间长达30 h以上, 山区降水量50 mm左右, 导致5条支流和渭干河干流出现有水文记录以来的最大洪峰, 流量超过警戒流量和危险流量的2～3.5倍, 暴雨(雪)过程结束之后, 融雪型洪峰长时间居高不下. 洪水过程中, 各支流以及暴雨与融雪等多种洪峰遭遇现象很明显. 克孜尔水库入库洪峰流量达3 660 m3*s-1, 经水库调洪错峰, 出库峰值流量为1 000 m3*s-1, 削峰率72.7%.     

添加剂对土体的加固作用及冻胀防治研究

将研制的高分子有机材料作为添加剂，加入到土体中，经过拌和夯实、干燥固结，能够起到稳定和提高土体的强度，并具有低渗透和低吸水等特性．冻胀试验表明：加入添加剂不仅能阻止土体冻胀的产生、外来水源的入侵及水分的迁移，还能隔断土体孔隙之间的联系，使水分在土体孔隙中不能运移，从而达到了防治冻胀的目的。     

地震荷载作用下温度和围压对冻土强度影响的试验研究

通过对重塑冻结兰州黄土的动三轴试验，较系统研究了地震荷载作用下冻土的动强度特性，并且定量研究了其在不同温度(-2℃、-5℃、-7℃)和围压(1MPa、3MPa、5MPa)条件下的变化规律．结果发现：冻结黄土的动抗剪强度随围压的增大、温度的降低、振次的减少而增大；动粘聚力Cd随振次的减小和温度的降低而增大；动内摩擦角吼随振次的增大和温度的降低而增大。     

济阳坳陷稀土元素特征及其在物源对比中的应用

物源是控制沉积物中REE组成最主要的因素，济阳坳陷区岩石稀土元素特征表明：①济阳坳陷古生界与华北地台其他地区同时代地层岩石的REE分布特征具有极大的相似性，这体现了晚古生代济阳坳陷区所处的整个华北地台区为一稳定的克拉通沉积盆地，地层横向分布稳定，具有一致的物源和构造背景；②济阳坳陷古生界为中生界的物源，反映了济阳坳陷区由古生代稳定地台型沉积到中生代山间盆地沉积的转变，中生代洼陷区的沉积主要来自对附近凸起区古生代地层的剥蚀；③新生界样品与中生界样品的REE分布模式具有很大的相似性，从一个侧面反映了济阳坳陷中生代与新生代的构造格局的转变，中生代接受沉积的部分洼陷区至古近纪成为供给物源的凸起区。     

全站仪机载导线测量程序开发研究

介绍了全站仪机载程序开发的重要性和必要性，基于Leica公司TPS1000／1100系列全站仪机载程序开发工具——GeoBASIC，阐述了机载导线测量程序开发的技术关键，所开发的程序达到了预期的效果，满足了用户的需求。     

时频测控技术的发展

目前，在所有的物理量中时间与频率标准的物理实现具有最高的准确度和稳定度，它们的发展不但在计量技术中，而且在几乎整个高科技领域中起着十分重要的作用。这方面的发展一直受到发达国家的高度重视。根据近年来与国外同行的技术交流和了解的情况，对时频测控技术的发展和影响等作了介绍。     

Continental subduction and exhumation of UHP rocks. Structural and geochronological insights from the Dabieshan (East China)

In the Dabieshan, the available models for exhumation of ultrahigh-pressure (UHP) rocks are poorly constrained by structural data. A comprehensive structural and kinematic map and a general cross-section of the Dabieshan including its foreland fold belt and the Northern Dabieshan Domain (Foziling and Luzenguang groups) are presented here. South Dabieshan consists from bottom to top of stacked allochtons: (1) an amphibolite facies gneissic unit, devoid of UHP rocks, interpreted here as the relative autochton; (2) an UHP allochton; (3) a HP rock unit (Susong group) mostly retrogressed into greenschist facies micaschists; (4) a weakly metamorphosed Proterozoic slate and sandstone unit; and (5) an unmetamorphosed Cambrian to Early Triassic sedimentary sequence unconformably covered by Jurassic sandstone. All these units exhibit a polyphase ductile deformation characterized by (i) a NW–SE lineation with a top-to-the-NW shearing, and (ii) a southward refolding of early ductile fabrics.

The Central Dabieshan is a 100-km scale migmatitic dome. Newly discovered eclogite xenoliths in a Cretaceous granitoid dated at 102 Ma by the U–Pb method on titanite demonstrate that migmatization post-dates HP–UHP metamorphism. Ductile faults formed in the subsolidus state coeval to migmatization allow us to characterize the structural pattern of doming. Along the dome margins, migmatite is gneissified under post-solidus conditions and mylonitic–ultramylonitic fabrics commonly develop. The north and west boundaries of the Central Dabieshan metamorphics, i.e. the Xiaotian–Mozitan and Macheng faults, are ductile normal faults formed before Late Jurassic–Early Cretaceous. A Cretaceous reworking is recorded by synkinematic plutons.

North of the Xiaotian–Mozitan fault, the North Dabieshan Domain consists of metasediments and orthogneiss (Foziling and Luzenguang groups) metamorphosed under greenschist to amphibolite facies which never experienced UHP metamorphism. A rare N–S-trending lineation with top-to-the-south shearing is dated at 260 Ma by the ⁴⁰Ar/³⁹Ar method on muscovite. This early structure related to compressional tectonics is reworked by top-to-the-north extensional shear bands.

The main deformation of the Dabieshan consists of a NW–SE-stretching lineation which wraps around the migmatitic dome but exhibits a consistently top-to-the-NW sense of shear. The Central Dabieshan is interpreted as an extensional migmatitic dome bounded by an arched, top-to-the-NW, detachment fault. This structure may account for a part of the UHP rock exhumation. However, the abundance of amphibolite restites in the Central Dabieshan migmatites and the scarcity of eclogites (found only in a few places) argue for an early stage of exhumation and retrogression of UHP rocks before migmatization. This event is coeval to the N–S extensional structures described in the North Dabieshan Domain. Recent radiometric dates suggest that early exhumation and subsequent migmatization occurred in Triassic–Liassic times. The main foliation is deformed by north-verging recumbent folds coeval to the south-verging folds of the South Dabieshan Domain. An intense Cretaceous magmatism accounts for thermal resetting of most of the ⁴⁰Ar/³⁹Ar dates.

A lithosphere-scale exhumation model, involving continental subduction, synconvergence extension with inversion of southward thrusts into NW-ward normal faults and crustal melting is presented.     

APPLICATION OF SOME MECHANICAL CONCEPTS TO STRUCTURAL GEOLOGY

This paper discusses some mechanical concepts that have been largely applied to structural geology and tectonics, and addresses the problems and misunderstandings in use of these mechanical terms. The purpose is to stimulate the interests for structural geologists in using the mechanical principles and methods correctly to solve the geodynamic problems.