Confined pyrolysis of Tertiary lacustrine source rocks in the Western Qaidam Basin,Northwest China: Implications for generative potential and oil maturity evaluation

The parameter S₁ + S₂ (genetic potential) of Rock-Eval analysis is widely used as an evaluation of the genetic potential for the source rocks. Oligocene–Miocene saline lacustrine source rocks in the western Qaidam basin have low total organic C contents (TOC), most around 0.5% with a few exceptions >1.0%. Mineral matrix effects are substantial for source rocks with low TOC, resulting in relatively low S₁ and S₂ peaks. Based on the results of confined pyrolyses (sealed Au capsules) on 6 Oligocene–Miocene source rocks from the western Qaidam basin, with TOC ranging between 0.48% and 2.22%, the relationship between the S₁ + S₂ parameter and the maximum amount of extracted bitumen or saturated and aromatic hydrocarbons (SA) after the confined pyrolysis has been established as follows: bitumen (mg/g rock) = 1.4924 × (S₁ + S₂) + 0.3201 (r = 0.987), or SA (saturates + aromatics) (mg/g rock) = 0.7083 × (S₁ + S₂) + 0.4045 (r = 0.992). Based on these formulas, the amounts of hydrocarbons generated from source rocks can be reasonably estimated. The typical crude oils with low biomarker maturities in this region appear substantially different to the pyrolysates of these six rocks at 180–300 °C but comparable to the pyrolysates at 320 °C and higher temperatures based on molecular parameters. This result, in combination with the physical and gross compositions of the crude oils, suggests that the majority of these crude oils were generated from the source rocks during the main oil-generative stage, possibly at a maturity higher than R_o 0.74%.     

钛矿石物相的快速分析

钛矿石的主要矿物有金红石(TiO2),其次钛铁矿(FeO.TiO2)、榍石(CaO.TiO2.SiO2)和钛磁铁矿(FeTiO3.nFe2O3)。样品经碱熔融,过氧化氢比色测定总钛;利用电感耦合等离子体质谱法测定,氟化氢铵和盐酸溶解钛铁矿、钛磁铁矿、榍石和硅酸盐中的钛;湿法磁选、盐酸溶解钛磁铁矿中的钛;磁选后的残渣经800℃灼烧,氟化氢铵和盐酸溶解榍石和硅酸盐中的钛。方法对12个钛矿石样品进行了4种钛矿物物相分析,结果与实际地质成矿组分符合。     

胶东辽上特大型金矿床地质特征

辽上金矿床位于胶东新发现的胶莱盆地东北缘成矿区之内,为胶东东部首例特大型金矿。矿区金成矿以充填作用为特征,载金矿物主要为自形—半自形结构黄铁矿和白云石,以网脉状、细脉状、微细脉状黄铁矿白云石细脉形式出现于岩石碎裂隙中,或以黄铁矿白云石大脉状充填于断裂构造中。矿石包括含金黄铁矿白云石脉型和含黄铁矿白云石脉蚀变岩型2大类。通过对比认为,该矿床为一新类型,即黄铁矿白云石脉型金矿床。这一新类型特大型金矿的发现,预示着胶莱盆地边缘地区具有较好的找矿前景,尤其在金牛山地区应有可能在短期内取得更大的找矿突破。     

激光囚禁放射性氪同位素技术测量地下水年代

地下水年代测定对于了解地下水循环具有十分重要的意义。放射性氪同位素⁸⁵Kr（半衰期10.8a）、⁸¹Kr（半衰期0.23Ma）具有十分理想的地球物理化学特性,十分适于对溶解了大气的水或冰样品进行绝对年代测定。由于样品中的放射性氪原子量极少,利用⁸¹Kr含量进行地下水测年时需要数吨水样品才能完成(Earth and Planetary Science Letters,2000,182：103～113;Geophysical Research Letters,2004,31: L05503)。本文主要介绍我们在中国科学技术大学建立的激光冷却氪原子测量装置,该系统已经成功地对氪原子进行了激光冷却和囚禁,实现了单个放射性氪原子⁸¹Kr和⁸⁵Kr的计数测量。氪原子的冷却捕获速率被大幅提高,预计测年应用中所需样品量可减小一个量级以上,这将使得我们可以开展新的地下水年代测定应用。     

激发极化法在四川红层地区水资源勘察中的应用

阐述了激发极化法的基本原理和技术方法,利用激发极化法的极化率、电阻率、衰减度半衰时、充电率等极化参数在四川红层地区寻找地下水,并探讨了红层地区的含水层位,以及含水层位的确定。该方法受地形影响小,曲线反映异常直观,能有效解决红层地区的找水任务。     

一种测定非饱和土-水力学参数的方法

详细介绍了非饱和土-水力学参数联合测试系统,该系统分别利用轴平移技术和达西定律测定非饱和土土-水特征曲线和水相渗透系数。通过试验结果对比可以发现,由联合测试系统确定土-水特征曲线与压力板仪溢出水校正称量法确定的土-水特征曲线接近,但由联合测试系统确定的试样残余含水率比使用压力板仪溢出水校正称量法确定的试样含水率要小;由联合测试系统确定的渗透函数,当饱和度较大时,实测值与模型预测值较为接近;当饱和度较小时,实测值与模型预测值相差较大。     

鉴定热处理琥珀的关键证据

在琥珀热处理实验研究的基础上,采用常规宝石学方法和红外光谱仪,测试并跟踪收集和对比分析了实验样品热处理前、后的宝石学参数和红外光谱的变化规律及琥珀内含物的演化、改造与破坏标识,并对获得的琥珀热处理效果进行了成因分析,从而总结出鉴定琥珀热处理的关键证据。研究结果表明：（1）折射率的增加、荧光的弱化或湮灭是热处理琥珀的重要佐证;（2）盘状裂隙、红色流纹、汽化纹、龟裂纹和氧化裂纹是热处理琥珀的重要标识;（3）FTIR光谱中I=2930cm-1/I=1735cm-1比值若≤1,可视为热处理琥珀的红外光谱指纹检测依据;（4）1735,1700cm-1处的羰基（C？O）伸缩振动与1260～1156cm-1处的C—O伸缩振动吸收强度的明显增强及多峰合并的趋势反映出热处理琥珀表面的热氧化反应;C？O浓度的增加可能是热处理琥珀红色的生色团,同时又是热处理琥珀荧光的淬灭剂。     

Speciation analysis of metals （Tl, Cd and Pb） in Tl-containing pyrite and its cinder from Yunfu Mine, China, by ICP-MS with sequential extraction

The speciation of heavy metals such as thallium, cadmium and lead existing in pyrite and pyrite cinder was analyzed by ICP-MS with a sequential extraction procedure. The distribution patterns of these metals including exchangeable, reducible, oxidizable and residual fractions were obtained. Tl, Cd and Pb in pyrite and pyrite cinder samples from each extraction step were determined by inductively coupled plasma mass spectrometry (ICP-MS). Under the optimized instrumental conditions, detection limits of Tl, Cd and Pb in different matrices were within the range of 0.006–0.07 μg/L, and the relative standard deviations ranged from 0.8% to 1.2%. The accuracy of Tl, Cd and Pb determination was checked by analyzing two certified reference materials. The results demonstrate that trace Tl, Cd and Pb in the samples can be accurately determined. The sequential extraction results revealed that the percent contents of Tl, Cd and Pb in exchangeable, reducible and oxidizable fractions in pyrite cinder are different from those in pyrite and in pyrite cinder. Tl, Cd and Pb mostly are distributed in residual fraction. Therefore, the mobility of metals in pyrite is higher than that in pyrite cinder. Although distributions of Tl, Cd and Pb in the non-residual fraction are not dominant in pyrite cinder, the total concentrations of them could not be ignored. Consequently, attention must be paid to the risk of potential pollution by pyrite cinder.     

工程桩静载试验确定PHC管桩承载力

以工程实例介绍静压管桩基础的设计承载力取值,采用先施工工程桩进行静载试验,以其结果反算单桩竖向承载力,结合桩的入土长度等给出应用于工程实际的单桩竖向承载力设计值(R)的方法,供同行借鉴。