Simulations of a giant hybrid air shower detector

We have used Monte Carlo simulations to investigate the capabilities of a giant air shower observatory designed to detect showers initiated by cosmic rays with energies exceeding 10¹⁹ eV. The observatory is to consist of an array of detectors that will characterise the air shower at ground level, and optical detectors to measure the fluorescence light emitted by the shower in the atmosphere. Using these detectors together in a ‘hybrid’ configuration, we find that precise geometrical reconstruction of the shower axis is possible, leading to excellent resolution in energy. The technique is also shown to provide very good reconstruction below 10¹⁹ eV, at energies where the ground array is not fully efficient.     

5个新发现的X选BL Lac天体

利用ＲＯＳＡＴＶＬＡ方法筛选，从ＲＯＳＡＴＸ射线源中选出了一批新的ＢＬＬａｃ天体和类星体的候选体．１９９６年１２月８日至１７日，利用北京天文台２．１６ｍ望远镜和新从美国引进的ＯＭＲ摄谱仪，对这批新候选体进行了光谱认证．经ＳＵＮ工作站处理，又发现了５个新的Ｘ选ＢＬＬａｃ天体．此外，还对去年作者在ＯＭＲ引进之前发现的ＢＬＬａｃ天体进行了检验，结果发现，去年发现的７个ＢＬＬａｃ天体中，２３２２＋３４３的ＣａＩＩＨ＆Ｋ“Ｂｒｅａｋｓｔｒｅｎｇｔｈ”为２６．９％，稍大于判据２５％，因此，２３２２＋３４３到底是ＢＬＬａｃ天体还是射电星系还有待于进一步测光及偏振观测的验证．     

A perturbation theory for Love waves in anelastic media

Summary. We give a systematic formulation and a rigorous justification of a perturbation technique for the computation of the eigenvalues and eigenfunctions of Love waves (and toroidal oscillations by an appropriate change for variables) in an anelastic medium with a constitutive law modelling geophysical media of current interest such as the Kelvin—Voigt Solid, the Maxwell Solid, the Standard Linear Solid, and the Standard Linear Solid with a continuous spectrum of relaxation times. We develop expressions relating the eigenvalues of eigenfunctions for Love waves in a continuously varying vertically stratified anelastic half-space to the corresponding elastic eigenvalues and eigenfunctions. Analytically, our correspondence principle has the form of a regular perturbation expansion in terms of a parameter for both the eigenvalues and eigenfunctions. The identification of ɛ is motivated by the dissipativity principle of viscoelasticity theory. Moreover, we show that our correspondence principle applies respectively only in the high and low frequency range for the Maxwell and Kelvin—Voigt Solids. Outside of the applicable range of frequencies, our correspondence principle yields no useful information. For the family of Standard Linear Solids it is uniformly applicable for all non-zero frequencies.
We also derive an explicit formula to estimate the radius of convergence of our perturbation expansions. This estimate of the radius of convergence for each eigenvalue and eigenfunction is functionally defined by the constitutive model for the anelastic medium. The estimate is frequency dependent and depends on the separation distance between the eigenvalue and the remainder of the spectrum of the corresponding elastic problem.     

Tensile stresses around boreholes due to transient fluid flow

We present solutions for the effective stress induced by gas flow through a porous solid into a borehole resulting from sudden pressure reduction. Tensile effective stress that exceeds the strength of the solid will lead to borehole failure. This has applications to the intentional creation of cavities, relevant to the efficient recovery of coalbed methane, and the avoidance of borehole stability problems in conventional gas production.     

A 20 cm2 CCD mosaic camera for a dark matter search part I : Mechanics,optics and cryogeny

A 20cm ² CCD mosaic camera has been especially built to search for dark galactic halo objects by the gravitational microlensing effect. The sensitive area is made of 16 edge-buttable CCDs developped by Thomson-CTS, with 23×23 µm ² pixels. The 35 kg camera housing and mechanical equipment is presented. The associated electronics and data acquisition system are described in a separate paper. The camera resides at the focal plane of a 40 cm, f/10, Ferson reflector. The instrument has been in operation since December 1991 at the La Silla Observatory (ESO).     

A shipborne- type wave-height meter for oceangoing vessels, using microwave Doppler radar

A wave-height meter using a simple microwave Doppler radar,simeq10mW in power and 10.525 GHz in frequency, is proposed so that we can measure oceanic waves effectively while the ship is steaming. It was first applied to the measurement of the variation of water level generated in a wave tank, which suggested that it is adequately applicable to the measurement of oceanic waves. A field test was carried out off the cape of Nojimazaki by installing the Doppler radar 5 m above the sea level at the bow of the ship. The result agreed reasonably well with that measured simultaneously by the ultrasonic wave-height meter installed at the same position. Another test is running successfully on a larger ship with the wave-height meter installed at 9 m above the sea level. The significant wave height measured by the present meter is being compared with that observed visually by the navigation officers.     

Analytic result for the properties of gravitational waves emitted by a large class of model sources

Expressions for the mass quadrupole moment tensor in the model for a wide variety of astrophysical objects are shown to be identical in form. This makes it possible to obtain analytical expressions for the gravitational radiation emitted by the sources, as well as the angular distribution, polarization dependence, and the wave forms of the radiation.     

A unified model of dwarf nova outbursts based on the disk instability

A unified model for outbursts of dwarf novae is proposed based on the disk instability model in cataclysmic variable stars. In this model, two different intrinsic instabilities (i.e., the thermal instability and the tidal instability) within accretion disks are considered in non-magnetic cataclysmic variable stars. It is suggested that all of three sub-classes of dwarf novae (i.e., U Gem-type, Z Cam-type and SU UMa-type dwarf novae) may be explained in terms of two model parameters of the orbital period of the binary and of the mass transfer rate within the framework of the disk instability model.     

A Critical review of theoretical models of negatively polarized light scattered by atmosphereless solar system bodies

About a dozen physical mechanisms and models aspire to explain the negative polarization of light scattered by atmosphereless celestial bodies. This is too large a number for the reliable interpretation of observational data. Through a comparative analysis of the models, our main goal is to answer the question: Does any one model have an advantage over the others? Our analysis is based on new laboratory polarimetric and photometric data as well as on theoretical results. We show that the widely used models due to Hopfield and Wolff cannot realistically explain the phase-angle dependence of the degree of polarization observed at small phase angles. The so-called interference or coherent backscattering mechanism is the most promising model. Models based on that mechanism use well-defined physical parameters to explain both negative polarization and the opposition effect. They are supported by laboratory experiments, particularly those showing enhancement of negative polarization with decreasing particle size down to the wavelength of light. According to the interference mechanism, pronounced negative branches of polarization, like those of C-class asteroids, may indicate a high degree of optical inhomogeneity of light-scattering surfaces at small scales. The mechanism also seems appropriate for treating the negative polarization and opposition effects of cometary dust comae, planetary rings, and the zodiacal light.