误差熵的估计问题研究

指出了具有复杂分布的随机量的总体熵的估计问题,首次给出了估计熵的最小截断误差限.推导了样本熵的近似估计公式,引入最优窗宽、全局最优窗宽的算法,首次解决了样本熵的估计值不惟一的问题.     

中国海相探矿权区块定量评价方法

在研究了我国海相油气探矿权区块基本油气地质条件、勘探程度、技术经济条件等要素和特点的基础上,给出了48个评价参数和归一化取值参照表,建立了探矿权区块评价工作流程、评分参数及计算公式。提出对我国海相勘探层探矿权区块评价应该注意:与国外海相碳酸盐岩评价的差别;与国内陆相碎屑岩评价的差别;成藏组合的划分;评价内容的有效性、不确定性和评价参数的可信度;成败经验的总结和勘探程度的研究。     

初至层析静校正在复杂山地三维地震勘探中的应用

随着地形高差增大、地貌单元多变、近地表模型复杂,目前被广泛应用的初至折射静校正的精度已无法满足精细勘探的要求。初至层析静校正技术,由给定的初始模型进行正演,用射线追踪方法得到初始模型的初至波,利用该初至波和实际拾取的初至波进行比较,计算地表模型的修正量,反复迭代求得准确的地表模型。山西省国阳新能股份有限公司二矿390水平九采扩区地表标高940～1100m,地貌单元复杂,在对该区资料处理时,利用初至层析折射静校正,经9次迭代计算后,真实地刻划出近地表模型。在二种静校正技术对比中,初至折射静校正不但近地表模型精度低于层析折射静校正,而且其叠加剖面精细程度也远低于层析静校正,如在初至折射静校正叠加剖面同相轴上呈现的凹凸形态,在层析静校正叠加剖面并无显示,且后者剖面的信噪比也比前者明显提高。     

鱼耳石中锶和钡富集的影响因素及其环境响应

鱼耳石中元素锶和钡主要来源于鱼类生存的水体,这两种元素通过腮或肠进入内耳淋巴液,继而以类质同象的方式沉淀在耳石晶格内部空位和晶格间隙中。耳石结晶沉淀的整个过程不仅受生物的调控作用,而且还受到外界环境,如水体元素浓度、盐度、温度等因素的影响,因此耳石中某种元素的浓度与其在水体中的浓度之比(元素富集系数)与鱼类所生存的环境之间具有一定的响应关系。在以上各种因素中,水体元素浓度对耳石元素富集系数的影响最为显著。一般来说,耳石中某种元素的含量与水体中相应的元素浓度呈正相关关系,而水体中元素之间就耳石中的富集过程也存在一定的相互促进或抑制作用,如Sr对Ba为协同作用,Ca对Sr、Zn为拮抗作用。另外,水体盐度或温度与元素富集系数之间不存在简单的线性相关关系,而是因鱼种、水体综合环境及元素种类不同而有所差异。研究结果表明:鱼种一定的情况下,耳石中元素富集系数与水体盐度和温度存在良好相关关系。基于以上相关性分析,可以认为耳石中元素富集系数与环境因子(水体元素浓度、盐度、温度)之间存在响应关系。因此,可以选用那些受环境影响大但对自身调控影响小的元素(如:Sr、Zn、Pb、Mn、Ba、Fe、Li、Ni、Cd)来建立耳石与水体环境之间元素富集系数的定量化模型,并利用这种响应关系及定量化模型进行生态环境监测和渔业管理。     

磷处理粉煤灰可作农业土壤磷源

粉煤灰(简称CCP或ash)具有改良土壤,增加植物产量的功能。此外,由于它特殊的多孔结构,也可用作吸纳并承载植物养分的载体。用NaH2PO4配制成含磷0.10mol/L浓度的溶液,对采自加拿大西安大略省Sarnia地区Lambton电厂的底灰(bottomash)进行振荡浸渍处理。结果表明,振荡浸渍66h后的粉煤灰中磷含量可达784×10-6。以磷处理粉煤灰、未进行磷处理的粉煤灰和石英砂按比例混合,作为基本生长介质进行玉米种植实验,其中实验配方设计为生长介质中含磷量分别为标准含磷浓度(50×10-6)的10%、25%、50%、75%和100%。生长26、34和46d后分别与不含磷的空白配方、施加含氮-磷-钾为0-20-0标准磷肥并控制磷含量为标准浓度(50×10-6)配方进行生物产量对比。生长实验结果表明,以磷处理粉煤灰供磷的生长介质,当含磷量为标准浓度的25%至100%时,其植物生长量就比添加标准浓度磷肥的配方好。种植46d后的生物生长量统计结果显示,含磷分别为标准浓度50%、75%和100%的实验介质中,玉米杆的鲜重较施标准磷肥介质中玉米分别增长39.46%、42.73%和46.13%;玉米杆干重依次增加29.71%、13.39%和28.87%;根鲜重平均增加16.62%;根干重平均增加14.03%。上述实验结果启示,粉煤灰可以很好地吸纳承载磷养分,并持续供给植物吸收生长,如果采用吸纳磷(或其他养分)的粉煤灰改良砂质土壤将有重要意义。     

A robust-symmetric mean: A new way of mean calculation for environmental data

Environmental data seldom follow normal distributions, so how to calculate their means is a very important problem. Commonly used methods for mean calculation, such as arithmetic mean, geometric mean, and median, were evaluated. Arithmetic means should only be used when datasets follow normal distributions. Geometric means are suitable for datasets which follow log-normal distributions. Medians are a kind of robust treatment. However, their efficiency is very low. Based on the methods described, two new ideas are developed: robust and symmetric, for calculating means. As far as the symmetric feature is concerned, Box-Cox power transformation is better than logarithmic transformation. Robust statistics and Box-Cox transformation are combined to produce the robust-symmetric mean. As environmental data often follow log-normal or skewed distributions, this method is better than the previous ones and also is appropriate.     

坡地农林复合系统的结构类型与效益分析─以长江三峡库区坡地农业为例

本义认为现代术语的农林复合系统来源于生产实践,体现了农业与林业的有机结合、品种生态和经济的有机结合、产品多样化以及管理科学化4个方面相统一的特点。文章在分析三峡库区农林复合系统的类型结构基础上,提出了农林复合系统可以进行层次结构划分的观点。最后,以典型案例研究方法入手,对1种农林结构类型进行效益分析,结果表明,采用植物篱农林复合坡地系统,是现阶段生产力水平下实现坡地生态经济协调发展的有效途径,值得广泛推广。     

黑龙江省与呼伦贝尔盟土地类型的划分及其分布规律

本文就土地研究的几个主要概念,即土地、土地分类、土地分级作了简要讨论,并结合黑龙江省及呼伦贝尔盟的具体条件,对为农、林、牧业服务的土地分类原则进行了初步探讨,还拟订了该区土地分级系统——土地类和土地型,及适合于大比例尺制图的土地组。在此基础上,将全区分为18个土地类、71个土地型。文章还从水平带性、垂直带性和土地结构三个方面,介绍了该区土地类型分布的一般规律。     

论Eppley PIR精密红外辐射仪的测量精度

本文依据红外辐射表(PIR)的结构、性能和工作原理讨论了测量精度及有关影响因素,比较了粗测和精测两种方法的特点,在此基础上提出了各测量方法的适用范围和精度范围以及提高测量精度的措施,同时也给出了一些特定场合下的测量实例及提高测量精度的具体方法。分析表明:精测方法具有很好的测量精度以及很强的环境适应性。粗测在限定的温度范围内具有测量简单、换算方便、易于实现自动化等优点,精度尚能满足一般要求,但在限定的温度范围以外,测量精度急剧恶化。在影响测量精度的各因素中以温度响应中表体热辐射测量的影响最大,在粗测方法中表内电池的性能与测量精度关系重大。强烈日射对测量精度有一定影响,经订正后可基本消除。     

Increasing critical sensitivity of the Load/Unload Response Ratio before large earthquakes with identified stress accumulation pattern

The Load/Unload Response Ratio (LURR) method is proposed for short-to-intermediate-term earthquake prediction [Yin, X.C., Chen, X.Z., Song, Z.P., Yin, C., 1995. A New Approach to Earthquake Prediction — The Load/Unload Response Ratio (LURR) Theory, Pure Appl. Geophys., 145, 701–715]. This method is based on measuring the ratio between Benioff strains released during the time periods of loading and unloading, corresponding to the Coulomb Failure Stress change induced by Earth tides on optimally oriented faults. According to the method, the LURR time series usually climb to an anomalously high peak prior to occurrence of a large earthquake. Previous studies have indicated that the size of critical seismogenic region selected for LURR measurements has great influence on the evaluation of LURR. In this study, we replace the circular region usually adopted in LURR practice with an area within which the tectonic stress change would mostly affect the Coulomb stress on a potential seismogenic fault of a future event. The Coulomb stress change before a hypothetical earthquake is calculated based on a simple back-slip dislocation model of the event. This new algorithm, by combining the LURR method with our choice of identified area with increased Coulomb stress, is devised to improve the sensitivity of LURR to measure criticality of stress accumulation before a large earthquake. Retrospective tests of this algorithm on four large earthquakes occurred in California over the last two decades show remarkable enhancement of the LURR precursory anomalies. For some strong events of lesser magnitudes occurred in the same neighborhoods and during the same time periods, significant anomalies are found if circular areas are used, and are not found if increased Coulomb stress areas are used for LURR data selection. The unique feature of this algorithm may provide stronger constraints on forecasts of the size and location of future large events.