Discrimination of sand dunes and loess deposits using grain-size analysis in northeastern Iran

Identification and characterization of aeolian deposits in arid environments provide information on mechanisms of loess and sand accumulation. The objectives of this study were to (i) identify the distribution of aeolian deposits, (ii) discriminate loess and sand deposits using granulometric data, and (iii) describe the aeolian deposition in Sarakhs area, northeastern Iran. Particle size distributions of 26 surface samples were determined using a laser grain-size analyzer. Fine sand, very fine sand, and very coarse silt were dominant fractions in studied sediments, and the sum of these fractions ranged from 46.9% in loess deposits to 93.8% in sand dunes. The mean grain size (M _z ) of sand dunes ranged from 3.31 to 3.54 ?, which gradually changed to 4.09 to 5.50 ? in loess deposits. Sorting, skewness, and kurtosis ranged from 0.84 to 1.94 ?, 0.18 to 0.49, and 0.76 to 2.38, respectively. Aeolian deposits in the area resulted in the incorporation of Hariroud River system and Kopeh Dagh Mountains for aeolian particle production and accumulation. Alluvial comminution in Hariroud River is suggested the main mechanism of sand and silt production and flood plain environment the main reservoir of these particles. The mountains of Kopeh Dagh act as a barrier and play a key role for sand and loess accumulation.     

Experimental study on the instability mechanism of the major-defect fractured rock

Based on calculations of rock fracture surface and angle, incremental-load creep experiments were conducted on two groups of major-defect fractured rock specimens in an RLW-2000 rheology test system. The research investigated the fracture type and the creep properties of major-defect fractured rock and analyzed the relationships between failure load and horizontal or vertical projection distance, and between each of theme and fracture area or angle. The results showed that rock fracture was divided into three types according to the distribution, including I, II, and III types. I, II, and III types were respectively an internal fracture running through neither the upper nor lower end, one through the upper or lower end and one through both upper and lower ends, and a III type was further sub-divided into III_I and III_II types. The instantaneous strain was larger than the creep strain under the same creep loading stage. As the creep loading increased on two groups of major-defect fractured rock, the instantaneous strain decreased abruptly and then increased abruptly, while the creep strain decreased rapidly at first and later increased near-linearly. When the failure angle was larger than the friction angle, failure load was positively correlated with failure angle yet was negatively correlated with vertical projection distance. Vertical projection distance and fracture angle, which decided fracture type, controlled rock failure load. Failure load increased in turn from I type to III type, and low-type fracture determined mainly failure load in multiply-fracture specimen.     

Stress distribution characteristic analysis and control of coal and gas outburst disaster in a pressure-relief boundary area in protective layer mining

Coal and gas outburst disasters in coal seams are becoming more serious as coal mines extend deeper underground in China. Furthermore, the protective coal seam mining technology featured by economic efficiency has been proven to be the most effective and widely applied method for the prevention of coal and gas outburst disasters. However, the determinations of the protective area coal and gas outburst prevention in a pressure-relief boundary area are fundamental issues that research should be focused on. The technical method for determining stress distribution in pressure-relief boundary area during protective coal seam mining is put forward in this paper. The method is based on a stress-seepage coupled relationship within a gas-containing coal seam. The method includes complex lab experiments and on-site measurements at the Qingdong Coal Mine. The final data illustrate that the permeability and vertical stress in the pressure-relief boundary area of the coal sample form a negative exponential function relationship. Additionally, the permeability of the coal sample within the abovementioned area is significantly different compared with that located at the center of the pressure-relief area. In the pressure-relief boundary area, the gas pressure distribution gradient is 0.0375 MPa/m, while the vertical stress distribution gradient registers 0.56 MPa/m. Under this condition, coal and gas outburst disasters are prone to be triggered. Therefore, effective precautions against coal and gas outburst disasters can be put forward in accordance with stress distribution characteristics within the abovementioned “boundary area.”     

中纬热层大气质量密度经向结构差异研究

本文利用CHAMP卫星以及全球电离层-热层模型(GITM)来研究太阳活动低年(2007—2009年)中纬热层大气质量密度(ρ)的经度结构变化.结果如下:(1)ρ存在明显的经度单波结构(单峰和单谷),且南北半球反相,波峰和波谷随着地方时增加而向东移动;(2)模拟表明离子拖曳效应在ρ结构差异的形成中起到了重要的作用,欧亚地区电子密度经度差异性较弱,不足以影响ρ经度分布,导致该地区ρ经度差异不明显;(3)在磁中纬地区,太阳天顶角的经度差异可达20°~30°,太阳光加热的经度不均匀性是导致ρ经度差异的另一个主要原因.     

基于瞬变电磁矩变换的快速三维反演方法

瞬变电磁法的严格三维反演计算复杂、占用资源多,在普通计算机上难以实现.本文引入瞬变电磁矩变换的概念,提出一种快速三维反演方法.该方法基于阻性限制(resistive limit)特性,建立包含异常体的三维大地的一阶矩响应正演算法,根据不同约束条件,选择优化的最速下降法实现瞬变电磁快速三维反演.文中通过含异常体的三维大地正演一阶矩与仿真数据一阶矩的对比,验证了快速三维正演算法的有效性,之后在不同约束条件下,利用优化的最速下降法实现了对含噪声的仿真瞬变电磁数据的快速三维反演.结果表明,该方法能够在普通计算机上短时间内较为准确地反演出地下异常体的体积和位置,在瞬变电磁数据的实时解释工作中具有良好的应用前景.     

Common‐shot Fresnel beam migration based on wave‐field approximation in effective vicinity under complex topographic conditions

Gaussian beam migration is a versatile imaging method for geologically complex land areas, which overcomes the limitation of Kirchhoff migration in imaging multiple arrivals and has no steep‐dip limits of one‐way wave‐equation migration. However, its imaging accuracy depends on the geometry of Gaussian beam that is determined by the initial parameter of dynamic ray tracing. As a result, its applications in exploration areas with strong variations in topography and near‐surface velocity are limited. Combined with the concept of Fresnel zone and the theory of wave‐field approximation in effective vicinity, we present a more robust common‐shot Fresnel beam imaging method for complex topographic land areas in this paper. Compared with the conventional Gaussian beam migration for irregular topography, our method improves the beam geometry by limiting its effective half‐width with Fresnel zone radius. Moreover, through a quadratic travel‐time correction and an amplitude correction that is based on the wave‐field approximation in effective vicinity, it gives an accurate method for plane‐wave decomposition at complex topography, which produces good imaging results in both shallow and deep zones. Trials of two typical models and its application in field data demonstrated the validity and robustness of our method.     

A distributed parameter model of a frame pin‐supported wall structure

Many reinforced‐concrete frames collapse via a soft‐story mechanism during severe earthquakes. Such collapses are mainly attributed to concentrated deformation in a soft story. Deformation control is thus important in preventing collapse. The frame pin‐supported wall structure is a type of rocking structure that releases constraints at the bottom of the wall. Previous research has obtained good results for the deformation control of this type of structure. However, the interior forces and strength demands of the pin‐supported wall have not been systematically explored. In this paper, a distributed parameter model is developed to investigate the strength demand of the wall in a frame pin‐supported wall structure. In the model, the pin‐supported wall is simplified as a bending beam and the frame is simplified as a shear beam. The two beams are joined by distributed shear connectors, so that the shear force can be transferred at any location on the interface. The model can be solved using differential equations based on equilibrium and compatibility. The accuracy of the model is verified using SAP2000 (Computers and Structures Inc., Berkeley, CA, USA). Displacement distribution of the structure and distributions of the moment and shear force within the pin‐supported wall are obtained for two typical external force profiles. It is found that the pin‐supported wall can effectively reduce the drift concentration factor. Distributions of the displacement, moment, and shear force are closely correlated with the relative stiffness of the wall and frame. Finally, recommendations on the stiffness and strength of a pin‐supported wall are made. Copyright © 2015 John Wiley & Sons, Ltd.     

多测线变偏移距VSP地震各向异性反演

本文从一般弱各向异性介质参数反演中得到了使用两条相互正交的变偏VSP测线计算弱各向异性(WA)参数的反演公式. 如果仅仅使用qP波, 则可以确定9个独立的WA参数, 这9个WA参数可以完全地描述井中接收点在两个剖面内介质的各向异性性质. 通过对走时曲线进行最小二乘条件下的三次样条光滑, 可以获得慢度矢量的垂直分量和水平分量. 如果介质是横向非均匀介质, 则水平分量仅仅被用作反演时的约束条件. 为了获得偏振矢量, 本文引入质心计算方法, 该方法计算简单、 稳定, 而且不存在解的奇异问题. 在寻找与一般各向异性介质最接近的高对称性正交各向异性介质和TTI各向异性介质时, 使用qP波各向异性坐标变换方法和最小二乘求解方法, 得到了与一般各向异性介质最接近的正交各向异性和TTI各向异性参数及其对称轴方向参数的计算公式. 使用这些方法, 对瓜哇海地区布设的两条相互正交的变偏VSP测线数据进行各向异性反演, 获得了井中10个接收点处介质的WA参数. 数值计算和实际资料反演表明, 本文所使用的反演方法能够准确地得到VSP井中接收点处介质的WA参数, 这是地震勘探中研究地壳介质各向异性性质最直接和最可靠的方法.      

沂沭断裂带重力场及地壳结构特征

沂沭断裂带为郯庐断裂带山东段,新构造运动显著,是华北地区的强震活动带之一。文中收集了该地区的布格重力数据,利用小波多尺度分析方法对重力场进行有效分离,研究区域地壳结构特征及断裂空间展布,并应用Parker变密度模型对区域莫霍面进行反演分析,得到以下几点结论:1)重力区域场显示,沂沭断裂带形成了NNE走向的大型重力梯度带,分隔了鲁西、鲁东地块,成为区域内重要的地球物理分界线。2)重力局部场显示,中上地壳结构复杂,沂沭带内部呈现两堑一垒的重力异常格局,5条主干断裂形成线性梯度带分布于东、西地堑内,鲁西块体的多条NW向活动断裂交切于沂沭断裂带,多数断裂只交切于西地堑,而蒙山山前断裂和苍尼断裂横穿沂沭断裂带;下地壳结构相对简单,发生明显的褶曲构造,表现出大规模高、低密度异常相间排列的典型特征。3)区域莫霍面形态东高西低,沂沭断裂带形成了莫霍面陡变带,造成了东西分异格局,潍坊东—莒县—临沂一线出现莫霍面上隆区,具有强震发生的深部孕震环境。4)区域内地震多发于高、低重力异常转化带之间,特别是活动断裂对应的重力梯度条带之上,地震的发生与断裂活动有着密切的关系,沂沭断裂带地震活动性最强,且东地堑强于西地堑。     

国际地理学期刊的主要特征

依据2015年6月发布的2014年度国际期刊引证报告,将SCI收录的46种地理学期刊按学科分为5大类,对各学科期刊的影响因子、总被引频次等相关引证指标进行分析,并对各专业地理学期刊2009-2014年间的学术影响力增长情况进行总结。同时,整理国际地理学期刊的年刊文量、出版国别、出版周期和出版公司等期刊出版资料,对国际地理学期刊的学科类型分布、学术影响指标、编辑出版状况之间的相关影响特征进行探讨。