CO2加富对塔玛亚历山大藻叶绿素荧光参数及产毒的影响

由大气中CO_2浓度升高引起的海洋酸化,是全球性的重大环境问题之一。本研究采用实验生态学的方法,以塔玛亚历山大藻(Alexandrium tamarense)为研究对象,分析其在CO_2加富条件下叶绿素荧光动力学参数及产毒特征的变化。调制叶绿素荧光结果显示,CO_2加富对塔玛亚历山大藻的PSⅡ最大光化学量子产量(Fv/Fm)、最大相对电子传递效率(r ETRmax)有显著影响(P0.05),且随着培养时间的增长Fv/Fm、r ETRmax均降低,对半饱和光强(Ik)、快速光曲线初始斜率(α)却无显著影响(P0.05)。结果说明CO_2加富能促进塔玛亚历山大藻的PSⅡ最大光化学量子产量,提高其最大光能转换效率和相对最大电子传递效率。高效液相色谱法分析结果显示,该株塔玛亚历山大藻主要产漆沟藻毒素1(GTX1)、漆沟藻毒素4(GTX4)、N-磺酰氨甲酰基毒素(C1)及N-磺酰氨甲酰基毒素(C2)四种PSTs毒素,CO_2加富不改变主要麻痹性贝毒(PSTs)的种类组成,但能显著提高氨基甲酸酯类毒素(GTX1、GTX4)产量(P0.05),而降低N-磺酰氨甲酰基类毒素(C1、C2)产量(P0.05),说明加富能使塔玛亚历山大藻所产毒素发生转化,进而影响藻细胞的整体毒性。     

Underwater Navigation Based on Real-Time Simultaneous Sound Speed Profile Correction

Precise sound speed profile (SSP) information is critical when using sonar for underwater terrain navigation. Nevertheless, acquiring SSP information in real-time is difficult, especially in underwater navigation environment. To account for this problem, this paper presents an underwater navigation method that applies real-time SSP correction to the terrain measurements. The method uses a probe to measure the surface sound speed simultaneously. Meanwhile, redundancy of topographic measurement data is exploited to derive the equivalent SSP information. The acquired equivalent SSP is updated continuously with particle filter algorithm. The terrain measurements can be corrected in real-time with the equivalent SSP to improve the performance of underwater terrain navigation. By removing the impact of inaccurate SSP from the terrain measurements, the proposed method can achieve precise and robust underwater navigation result without using an underway-profiling instrument. Simulated results confirm the good performance of the proposed method.     

深海嗜热异化铁还原菌Caloranaerobacter ferrireducens DY22619T对不同铁氧化物的铁还原特性

异化铁还原微生物在铁元素的地球化学循环中具有重要意义。深海热液活动是大洋铁元素的重要来源,目前深海热液环境中铁代谢相关微生物研究很少。本文对一株分离自深海热液区的嗜热异化铁还原菌新种Caloranaerobacter ferrireducens DY22619T的铁还原特性进行分析,比较了该菌对无定形羟基氧化铁、无定形铁氧化物和针铁矿3种不同铁氧化物的铁还原速率;并利用透射电镜对矿化产物进行矿物形貌、组成元素和晶型的分析。研究发现该菌生长在指数期至稳定期时,铁还原速率最快,其中对无定形羟基氧化铁和无定形铁氧化物的还原速率较高,达2.82 μmol/h和2.15 μmol/h;透射电镜结果表明,该菌可将3种不同胞外铁氧化物均还原矿化形成颗粒状磁铁矿,由针铁矿矿化形成的磁铁矿少但粒径最大,而由无定形铁氧化物形成的磁铁矿晶面不同于另外两种铁氧化物。结果表明,该菌有很强的铁还原和矿化能力,能厌氧呼吸还原三价铁氧化物,但是铁氧化物的性质对该菌胞外铁还原能力和矿化形成的磁铁矿的性质有重要影响。本研究为认识深海热液环境中异化铁还原菌在铁元素的地球化学循环和生物成矿过程提供了参考。     

基于长期观测的辽东湾口东部海域水动力特征研究

辽东湾口东部海域是辽东湾与渤海中部进行物质和能量交换的主要通道之一。本文利用坐底式海床基平台获取的近8个月的水动力连续观测资料,通过谱分析和调和分析方法对该海域的潮汐、潮流特征进行分析,并讨论了余流及底层温度的季节变化规律。研究结果表明:该海域潮汐属于不规则半日潮,平均潮差为0.95 m,最大可能潮差为2.27 m。潮流属于不规则半日潮流,M₂分潮流为其优势分潮流。主要分潮流运动形式为往复流,最大流速方向为西南-东北向。余流的季节性特征较为明显:秋季,余流流速在中层达到最大,流向以西南向为主;冬季,余流流速垂向变化较小,并呈西南偏西向流动;春季,流速随深度增加而减小,流向从表层至底层呈现逆时针旋转的特征。受底层潮流、水平温度梯度及海面温度日变化的影响,底层温度表现出短期的高频变化特征:秋季,短期振荡以半日周期信号为主;冬季,全日周期信号较为显著;春季,短期振荡的现象较弱。     

Sequence stratigraphic analysis of Eocene Rock Strata,Offshore Indus,southwest Pakistan

In this study, seismic data from two wells (Pak G2-1 and Indus Marine-1C) and age diagnostic larger benthic foraminifera (LBF) within drill cuttings has been used for the first time to identify depositional sequences within the carbonates in the Offshore Indus Basin, Pakistan. The Offshore Indus is tectonically categorized as a passive continental margin where carbonates occur as shelf carbonates in the near offshore and on volcanic seamounts in deeper waters. Seismic data analysis has indicated the presence of minor faults and carbonate buildups above the igneous basement in the south. Patterns of the seismic reflections enabled definition of three seismic facies units identified as: Unit 1 basement, represented by chaotic, moderate amplitude reflection configuration; while parallel bedding and the drape of overlying strata is typical character of Unit 2, carbonate mound facies. The younger Miocene channels represent Unit 3. The diagnosis of Alveolina vredenburgi/cucumiformis biozone confirmed the Ilerdian (55–52 Ma) stage constituting a second order cycle of deposition for the Eocene carbonates (identified as Unit 2). The carbonate succession has been mainly attributed to an early highstand system tract (HST). The environmental conditions remained favorable leading to the development of keep-up carbonates similar to pinnacle buildups as a result of aggradation during late transgressive system tract and an early HST. The carbonate sequence in the south (Pak G2-1) is thicker and fossiliferous representing inner to middle shelf depths based on fauna compared to the Indus Marine-1C in the north, which is devoid of fossils. Three biozones (SBZ 5, SBZ 6 and SBZ 8) were identified based on the occurrence of LBF. The base of the SBZ 5 zone marks the larger foraminifera turnover and the Paleocene–Eocene (P–E) boundary. The LBF encountered in this study coincides with earlier findings for the P–E boundary. Our findings indicate that the entire Ilerdian stage ranges from 55.5 to 52 Ma that was the episode of warmer water conditions on the carbonate shelves leading to the diversification of K-strategist larger foraminifera. The larger foraminiferal assemblage encountered in this study confirms the findings. The possible indication of stratigraphic-combination traps, revealed as reflection terminations, make carbonate mounds in the south a potential exploration target.     

Heat and mass transfer effects during displacement of deepwater methane hydrate to the surface of Lake Baikal

The present paper focuses on heat and mass exchange processes in methane hydrate fragments during in situ displacement from the gas hydrate stability zone (GHSZ) to the water surface of Lake Baikal. After being extracted from the methane hydrate deposit at the lakebed, hydrate fragments were placed into a container with transparent walls and a bottom grid. There were no changes in the hydrate fragments during ascent within the GHSZ. The water temperature in the container remained the same as that of the ambient water (~3.5 °С). However, as soon as the container crossed the upper border of the GHSZ, first signs of hydrate decomposition and transformation into free methane gas were observed. The gas filled the container and displaced water from it. At 300 m depth, the upper and lower thermometers in the container simultaneously recorded noticeable decreases of temperature. The temperature in the upper part of the container decreased to –0.25 °С at about 200 m depth, after which the temperature remained constant until the water surface was reached. The temperature at the bottom of the container reached –0.25 °С at about 100 m depth, after which it did not vary during further ascent. These observed effects could be explained by the formation of a gas phase in the container and an ice layer on the hydrate surface caused by heat consumption during hydrate decomposition (self-preservation effect). However, steady-state simulations suggest that the forming ice layer is too thin to sustain the hydrate internal pressure required to protect the hydrate from decomposition. Thus, the mechanism of self-preservation remains unclear.     

Modern modes of provenance and dispersal of terrigenous sediments in the North Pacific and Bering Sea: implications and perspectives for palaeoenvironmental reconstructions

During expedition 202 aboard the RV Sonne in 2009, 39 seafloor surface sediment sites were sampled over a wide sector of the North Pacific and adjoining Bering Sea. The data served to infer land–ocean linkages of terrigenous sediment supply in terms of major sources and modes of sediment transport within an over-regional context. This is based on an integrated approach dealing with grain-size analysis, bulk mineralogy and clay mineralogy in combination with statistical data evaluation (end-member modelling of grain-size data, fuzzy cluster analysis of mineralogical data). The findings on clay mineralogy served to update those of earlier work extracted from the literature. Today, two processes of terrigenous sediment supply prevail in the study area: far-distance aeolian sediment supply to the pelagic North Pacific, and hemipelagic sediment dispersal from nearby land sources via ocean currents along the continental margins and island arcs. Aeolian particles show the finest grain sizes (clay and fine silt), whereas hemipelagic sediments have high abundances of coarse silt. Exposed sites on seamounts and the continental slope are partly swept by strong currents, leading to residual enrichment of fine sand. Four sediment sources can be distinguished on the basis of distinct index minerals revealed by statistical data analysis: dust plumes from central Asia (quartz, illite), altered materials from the volcanic regions of Kamchatka and the Aleutian Arc (smectite), detritus from the Alaskan Cordillera (chlorite, hornblende), and fluvial detritus from far-eastern Siberia and the Alaska mainland (quartz, feldspar, illite). These findings confirm those of former studies but considerably expand the geographic range of this suite of proxies as far south as 39°N in the open North Pacific. The present integrated methodological approach proved useful in identifying the major modern processes of terrigenous sediment supply to the study region. This aspect deserves attention in the selection of sediment core sites for future palaeoenvironmental reconstructions related to aeolian and glacial dynamics, as well as the recognition of palaeo-ocean circulation patterns in general.     

Solar-, monsoon- and Kuroshio-influenced thermocline depth and sea surface salinity in the southern Okinawa Trough during the past 17,300 years

Factors influencing millennial-scale variability in the thermocline depth (vertical mixing) and sea surface salinity (SSS) of the southern Okinawa Trough (OT) during the past 17,300 years were investigated based on foraminifer oxygen isotope records of the surface dweller Globigerinoides ruber sensu stricto and the thermocline dweller Pulleniatina obliquiloculata in the AMS ¹⁴C dated OKT-3 core. The thermocline depth is influenced by surface thermal buoyancy (heat) flux, in turn controlled by the annual mean insolation at 30°N and the strength of the East Asian winter monsoon (EAWM). Strong insolation and weak EAWM tend to increase buoyancy gain (decrease buoyancy loss), corresponding to shallow thermocline depths, and vice versa. Regional SSS is influenced by the global ice volume, the Kuroshio Current (KC), and vertical mixing. A deep thermocline coincides with a high SSS because strong vertical mixing brings more, saltier subsurface KC water to the surface, and vice versa. Local SSS (excluding the global ice volume effect) became lower in the northern OT than in the southern OT after ~9.2 ka, implying that Changjiang diluted water had stronger influence in the northern sector. SSS show no major changes during the Bølling/Allerød and Younger Dryas events, probably because the KC disturbed the North Atlantic signals. This argues against earlier interpretations of sea surface temperature records of this core. Wavelet and spectral analyses of the Δδ¹⁸O_P-G (δ¹⁸O of P. obliquiloculata minus G. ruber s.s.) and δ¹⁸O_local records display 1,540-, 1,480-, 1,050-, 860-, 640-, and 630-year periods. These are consistent with published evidence of a pervasive periodicity of 1,500 years in global climate as well as EAWM and KC signatures, and a fundamental solar periodicity of 1,000 years and intermediary derived periodicity of 700 years.     

Glaciomarine sedimentation and bottom current activity on the north-western and northern continental margins of Svalbard during the late Quaternary

Palaeo-bottom current strength of the West Spitsbergen Current (WSC) and the influence of the Svalbard-Barents Sea Ice Sheet (SBIS) on the depositional environment along the northern Svalbard margins are poorly known. Two gravity cores from the southern Yermak Plateau and the upper slope north of Nordaustlandet, covering marine isotope stage (MIS) 1 to MIS 5, are investigated. Five lithofacies, based on grain size distribution, silt/clay ratio, content and mean of sortable silt (SS), are distinguished to characterise the contourite-dominated sedimentary environments. In addition, depositional environments are described using total organic carbon (TOC), total sulphur (TS) and calcium carbonate (CaCO₃) contents of sediments. Facies A, containing coarse SS, suggests strong bottom current activity and good bottom water ventilation conditions as inferred from low TOC content. This facies was deposited during the glacial periods MIS 4, MIS 2 and during the late Holocene. Facies B is dominated by fine SS indicating weak bottom current and poor ventilation (cf. high TOC content of 1.2–1.6%), and correlates with the MIS 4/3 and MIS 2/1 transition periods. With an equal amount of clay and sand, fine SS and high content of TOC, facies C indicates reduced bottom current strength for intervals with sediment supply from proximal sources such as icebergs, sea ice or meltwater discharge. This facies was deposited during the last glacial maximum. Facies D represents mass-flow deposits on the northern Svalbard margin attributed to the SBIS advance at or near the shelf edge. Facies E sediments indicating moderate bottom current strength were deposited during MIS 5 and MIS 3, and during parts of MIS 2. This first late Quaternary proxy record of the WSC flow and sedimentation history from the northern Svalbard margin suggests that the oceanographic conditions and ice sheet processes have exerted first-order control on sediment properties.     

An artificial neural network-based response surface method for reliability analyses of <Emphasis Type="Italic">c</Emphasis>-φ slopes with spatially variable soil

This paper presents an artificial neural network (ANN)-based response surface method that can be used to predict the failure probability of c-φ slopes with spatially variable soil. In this method, the Latin hypercube sampling technique is adopted to generate input datasets for establishing an ANN model; the random finite element method is then utilized to calculate the corresponding output datasets considering the spatial variability of soil properties; and finally, an ANN model is trained to construct the response surface of failure probability and obtain an approximate function that incorporates the relevant variables. The results of the illustrated example indicate that the proposed method provides credible and accurate estimations of failure probability. As a result, the obtained approximate function can be used as an alternative to the specific analysis process in c-φ slope reliability analyses.