Hydrogeochemical and isotopic study of groundwater in the Habor Lake Basin of the Ordos Plateau,NW China

Hydrogeochemistry and isotopes were used to understand the origin and geochemical evolution in the Habor Lake Basin, northwestern China. Groundwater samples were taken, and the isotopic compositions δD, δ¹⁸O and major ions were analyzed. The groundwater can be divided into three types: the Quaternary groundwater, the shallow Cretaceous groundwater and the deep Cretaceous groundwater. The groundwater chemistry is mainly controlled by the feldspar weathering and dolomite weathering, the dissolution of Glauber’s salt, and cation exchange. Chemistry of lake water is mainly controlled by evaporation and precipitation. The stable isotopes of oxygen and hydrogen in groundwater cluster along the local meteoric water line, indicating that groundwater is of meteoric origin. Comparing with shallow groundwater, deep groundwater is depleted in heavy isotopes indicating that deep groundwater was recharged during late Pleistocene and Holocene, during which the climate was more wetter and colder than today.     

Changing depositional environment revealed from sediment components,west of “Swatch of No Ground”, northern Bay of Bengal

The sediment cores of 20 cm length collected from 31 to 83 m range of water depth from the inner shelf of Bay of Bengal west of “Swatch of No Ground” were analyzed for grain size, organic carbon, total nitrogen, calcium carbonate and clay mineralogy. Grain size analysis revealed that the sediment size decreases from west to east within the study area indicating a possible direction of transport towards east parallel to the coast. The grain size also decreases with increasing water depth, i.e. north to south, indicating sediment contribution to the area of study from Hooghly and other local rivers. In the cores studied, illite was the dominant clay mineral which seems to be a product of glacial weathering under arid conditions with its source being the Himalayan region. The organic carbon content was low in the sediments and was attributed to low plankton production or intense oxidation processes. Low calcium carbonate percentage also supports the view of a low productivity in this region. Organic carbon increases gradually from west to east indicating its association with finer sediments and also indicates transport due to currents which drift the organic carbon away before it settles down within the sediments. Higher values relatively closer to the coast in the eastern side indicate additional contribution from Sunderban mangroves. The C/N ratio obtained indicates mixed source of terrestrial and marine for the organic matter in the sediments. Sedimentation rates available for deltaic plains and shelves off Bangladesh when adopted for the present area revealed that a 20 cm long sediment column was deposited in around 10 years. In most of the cores studied, a change in the trend of sediment components and organic carbon was observed at around 10 cm where grain size increases and organic carbon decreases towards the surface inferring that during the last 5 years, possible floods during NE monsoon or due to melting of ice in Himalaya are responsible for releasing additional water and material which brought a change in hydrodynamic conditions. The surface depletion of organic carbon indicates its dilution by the addition of coarser materials.     

利用GEOSAT／ERM卫星测高数据计算中国近海海平面

本文利用一年（１９８６年１１月８日～１９８７年１１月１７日）２２个ＥＲＭ周期的ＧＥＯＳＡＴ卫星测高数据计算出中国近海海域（１０５°～１３５°Ｅ，０°～４０°Ｎ）相对于ＧＲＳ８０参考椭球面的１°×１°年平均海平面。该海平面我们称之为ＩＧＧＭＳＳ９５平均海平面。在数据处理过程中，由于采用了混合轨道误差模型及交叠平差技术，极大地消除了在误差中占主要成分的径向轨道误差影响，使得ＩＧＧＭＳＳ９５平均海平面的总体精度达到±２０～３０ｃｍ（ＲＭＳ）水平。与ＯＳＵ９１Ａ重力大地水准面模型相比较可以发现两者具有惊人的一致性。     

陕西省铝土矿地质特征及成矿规律

陕西省已知铝土矿产地主要分布于陕北的府谷县、渭北的铜川-韩城一带和陕南的西乡、镇巴、南郑地区;已知铝土矿都位于沉积间断面上,受地层层位控制,属滨海-浅海相沉积矿床。陕北和渭北铝土矿主要产于石炭系下统下部本溪组,陕南铝土矿主要产于二叠系上统吴家坪组底部王坡页岩段。成矿的地质构造条件是隆起区边缘。成矿物质来源既有基底碳酸盐岩的溶蚀分解物,也有陆源铝硅酸盐岩的风化分解物。气候条件是有利于使岩石中铝质析出的温暖潮湿条件。时间上有一个较长时间的沉积问断。对成矿有利的地形条件是古地形总体比较平缓,有利于铝硅酸盐风化物在缓慢的搬运过程中充分分解析出Al2O3。     

Landfill site selection using combination of fuzzy logic and multi-attribute decision-making approach

During the last decades, growth of urbanization and industrialization led to an increase in solid waste generation. Landfilling is the most prevalent ultimate disposal method for the municipal solid wastes in developing countries. The rapid municipal solid waste generation in Markazi province (central part of Iran) causes the need for precision in finding a suitable landfill site selection. In the present study, 12 factors (environmental and socioeconomic factors) have been applied to select the landfill site in Markazi province, Iran. The different methods including the analytic network process (ANP) combined with fuzzy linguistic quantifier, ordered weighted average (OWA), and weighted linear combination (WLC) approach in geographic information system was applied to find an appropriate landfill site. The OWA operator function permits the evaluation of the wide spectrum of consequences (with different scenario) obtained from different management strategies. Results revealed that integration of fuzzy logic, ANP, and OWA provides flexible and better ideas compared to the Boolean logic and WLC to select a suitable landfill site.     

Evaluation of CBM reservoir fracture characteristics by azimuthal AVA inversion

Exploitation of coalbed methane (CBM) is directly affected by the strike and density of fractures, particularly because fractures can act as conduits for water and gas (after desorption). To realize the azimuthal amplitude versus angle (AVA) inversion for a CBM reservoir, we treated reservoirs whose fractures are aligned vertically as being equivalent to a horizontal transverse isotropic medium and simplified the P-P wave reflection coefficient formula to an approximately linear equation. Then, we adopted a modified damping least squares algorithm to solve the azimuthal AVA inversion problem. With edited macro-bins, corrected residual moveout, and normalized amplitude, the azimuthal gathers exhibited unambiguous azimuthal AVA characteristics. The #3 CBM reservoir in the Qinshui Basin was selected for a case study. The density and strike of the reservoir fractures were obtained and analyzed, and the reservoir was divided into three classes according to fracture density. Finally, in comparison with the gas production data, we confirmed that the inversion results and reservoir classification were both reasonable and credible.     

Study of the interaction between dry granular flows and rigid barriers with an SPH model

This study uses an incompressible smoothed‐particle hydrodynamics model to investigate the interaction between dry granular material flows and rigid barriers. The primary aim is to summarise some practical guidelines for the design of debris‐resisting barriers. The granular materials are modelled as a rigid‐perfectly plastic material where the plastic flow corresponds to the critical state. The coupled continuity equation and momentum equation are solved by a semi‐implicit algorithm. Compared with flows in controlled flume experiments, the model adequately reproduces both the kinetic of the flows and the impact force under various conditions. Then the numerical simulations are used to study the detailed interaction process. It is illustrated quantitatively that the interaction force consists of two parts, ie, the earth pressure force caused by the weight of the soil and a dynamic force caused by the internal deformation (flowing mass on top of a dead zone). For the estimation of impact load, this study suggests that an increased earth pressure coefficient depending on the Froude number should be incorporated into the hydrostatic model.     

∼3,850 Ma tonalites in the Nuuk region,Greenland: geochemistry and their reworking within an Eoarchaean gneiss complex

The Eoarchaean (>3,600 Ma) Itsaq Gneiss Complex of southern West Greenland is dominated by polyphase orthogneisses with a complex Archaean tectonothermal history. Some of the orthogneisses have c. 3,850 Ma zircons, and they vary from rare single phase metatonalites to more common complexly banded migmatites. This is due to heterogeneous strain, in situ anatexis and granitic veining superimposed during younger tectonothermal events. In the single-phase tonalites with c. 3,850 Ma zircon, oscillatory-zoned prismatic zircon is all 3,850 Ma old, but shows patchy ancient loss of radiogenic Pb. SHRIMP spot analyses and laser ablation ICP-MS depth profiling show that thin (usually < 10 μm) younger (3,660–3,590 Ma and Neoarchaean) shells of lower Th/U metamorphic zircon are present on these 3,850 Ma zircons. Several samples with this simple zircon population occur on islands near Akilia. In contrast, migmatites usually contain more complex zircon populations, with often more than one generation of igneous zircon present. Additional zircon dating of banded gneisses across the Complex shows that samples with c. 3,850 Ma igneous zircon are not just a phenomenon restricted to Akilia and adjacent islands. For example, migmatites from Itilleq (c. 65 km from Akilia) contain variable amounts of oscillatory-zoned 3,850 Ma and 3,650 Ma zircon, interpreted, respectively, as the rock age and the time of crustal melting under Eoarchaean metamorphism. With only 110–140 ppm Zr in the tonalites and likely magmatic temperatures of >850°C, zircon solubility–melt composition relationships show that they were only one-third saturated in zircon. Any zircon entrained in the precursor magmas would thus have been highly soluble. Combined with the cathodoluminesence imaging, this demonstrates that the c. 3,850 Ma oscillatory zoned zircon crystallised out of the melt and hence gives a magmatic age. Thus the rare well-preserved tonalites and palaeosome in migmatites testify that c. 3,850 Ma quartzo–feldspathic rocks are a widespread (but probably minor) component in the Itsaq Gneiss Complex. C. 3,850 Ma zircon with negative Eu anomalies (showing growth in felsic systems) also occurs as detrital grains in rare c. 3,800 Ma metaquartzites and as inherited grains in some 3,660 Ma granites (sensu stricto). These demonstrate that still more c. 3,850 Ma rocks were present, but were recycled into Eoarchaean sediments and crustally derived granites. The major and trace element characteristics (e.g. LREE enrichment, HREE depletion, low MgO) of the best-preserved c. 3,850 Ma rocks are typical of Archaean TTG suites, and thus argue for crust formation processes involving important contributions from melting of hydrated mafic crust to the earliest Archaean. Five c. 3,850 Ma tonalites were selected as the best preserved on the basis of field criteria and zircon petrology. Four of these samples have overlapping initial ɛ_Nd (3,850 Ma) values from +2.9 to +3.6± 0.5, with the fourth having a slightly lower value of +0.6. These data provide additional evidence for a markedly LREE-depleted early terrestrial mantle reservoir. The role of c. 3,850 Ma crust should be considered in interpreting isotope signatures of the younger (3,800–3,600 Ma) rocks of the Itsaq Gneiss Complex. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.