Factors driving riverbed scouring and sedimentation in the Bayangaole to Toudaoguai reaches of the Upper Yellow River

The Inner Mongolia reaches of the Yellow River face problems of severe sedimentation caused by a variety of complex factors. The sedimentation process in those reaches has been characterized using the sediment balance method, and the key factors affecting the process have been analyzed using the correlation analysis method. The results show that during the period 1952–2012 the Bayangaole (Bayan Gol) to Toudaoguai reaches in Inner Mongolia have undergone successive processes of accumulative sedimentation, then relative balance, and then accumulative sedimentation once again. The total annual sedimentation is 12.0341×10⁸ m³, of which accumulations from July to October account for 95.1% and the reaches from Sanhuhekou to Toudaoguai account for 98.5%. The main factor affecting scouring and sedimentation of the Bayangaole to Sanhuhekou reaches is the combined water and sediment condition. The critical conditions for equilibrium are an incoming sediment coefficient < 0.007 kg·s·m^–6 and a flow discharge > 700 m³·s^–1. The main factor affecting scouring and sedimentation of the Sanhuhekou to Toudaoguai reaches is the incoming sediment from the tributaries on the south bank and the combined water and sediment condition of the main stream. The critical conditions of the main stream for maintaining equilibrium status are a flow discharge of the main stream exceeding 800 m³·s^–1 and a comprehensive incoming sediment coefficient < 0.005 kg·s·m^–6. The incoming sediment from the tributaries has little impact on the main stream when the annual sediment load is less than 0.1×10⁸ t. The incoming sediment coefficient of the main stream and the incoming sediment from the tributaries both play vital roles in the riverbed evolution of the Inner Mongolia reaches, but the latter contributes the most.     

A review of the NEMURO and NEMURO.FISH models and their application to marine ecosystem investigations

The evolution of the North Pacific Ecosystem Model for Understanding Regional Oceanography (NEMURO) family of models to study marine ecosystems is reviewed. Applications throughout the North Pacific have shown the models to be robust and to be able to reproduce 1D, 2D and 3D components of nutrient, carbon cycle and biogeochemical cycles as well as aspects of the lower trophic levels ecosystem (phyto- and zooplankton). NEMURO For Including Saury and Herring, an extension that includes higher trophic levels, can be run uncoupled or coupled to NEMURO. In the uncoupled mode, the growth and weight of an individual fish is computed using plankton densities simulated by NEMURO but with no feedback between fish consumption and plankton mortality. In the coupled mode, the feeding, growth and weight of a representative fish are computed, and prey removals due to feeding by fish appear as mortality terms on the prey. The NEMURO family of models continues to evolve, including effects of the microbial loop and iron limitation at lower trophic levels, and full life cycle, multi-species and multi-generational simulations at higher trophic levels. We outline perspectives for future end-to-end modeling efforts that can be used to study marine ecosystems in response to global environmental change.     

超慢速扩张环境下超镁铁质岩系统的热液硫化物成矿机理以及启示

西南印度洋63.5°E热液区是在超慢速扩张洋脊发现的首个超镁铁质岩热液系统。对取自该区的热液硫化物样品进行了系统的矿物学和地球化学分析,矿物学分析结果表明:该热液区硫化物为富Fe型高温硫化物,且经历了较深程度的氧化蚀变,大量中间态的Fe氧化物充填在硫化物矿物间的孔隙及内部解理中;这些硫化物相以白铁矿为主,其次是等轴古巴矿和少量铜蓝,缺乏黄铁矿、闪锌矿。据推断,该区的热液成矿作用分为4个阶段:低温白铁矿阶段→高温等轴古巴矿阶段→自形白铁矿阶段→后期海底风化阶段（少量铜蓝以及大量的Fe的羟氧化物）。与之相对应,地球化学分析结果表明这些硫化物的Fe含量较高（31.57%~44.59%）,Cu含量次之（0.16%~7.24%）,而Zn含量普遍较低（0.01%~0.11%）;微量元素较为富集Co（328×10-6~2 400×10-6）和Mn（48.5×10-6~1 730×10-6）。该区硫化物中较高含量的Fe、Co与超镁铁质岩热液系统相似,明显高于镁铁质岩热液系统。独特的热液硫化物矿物学特征和元素组成可能与该区普遍出露的地幔岩、橄榄岩蛇纹石化作用以及拆离断层的广泛发育的环境有关。     

Position-domain integrity risk-based ambiguity validation for the integer bootstrap estimator

Integrity monitoring for ambiguity resolution is of significance for utilizing the high-precision carrier phase differential positioning for safety–critical navigational applications. The integer bootstrap estimator can provide an analytical probability density function, which enables the precise evaluation of the integrity risk for ambiguity validation. In order to monitor the effect of unknown ambiguity bias on the integer bootstrap estimator, the position-domain integrity risk of the integer bootstrapped baseline is evaluated under the complete failure modes by using the worst-case protection principle. Furthermore, a partial ambiguity resolution method is developed in order to satisfy the predefined integrity risk requirement. Static and kinematic experiments are carried out to test the proposed method by comparing with the traditional ratio test method and the protection level-based method. The static experimental result has shown that the proposed method can achieve a significant global availability improvement by 51% at most. The kinematic result reveals that the proposed method obtains the best balance between the positioning accuracy and the continuity performance.     

The extension of the parametrization of the radio source coordinates in geodetic VLBI and its impact on the time series analysis

The radio sources within the most recent celestial reference frame (CRF) catalog ICRF2 are represented by a single, time-invariant coordinate pair. The datum sources were chosen mainly according to certain statistical properties of their position time series. Yet, such statistics are not applicable unconditionally, and also ambiguous. However, ignoring systematics in the source positions of the datum sources inevitably leads to a degradation of the quality of the frame and, therefore, also of the derived quantities such as the Earth orientation parameters. One possible approach to overcome these deficiencies is to extend the parametrization of the source positions, similarly to what is done for the station positions. We decided to use the multivariate adaptive regression splines algorithm to parametrize the source coordinates. It allows a great deal of automation, by combining recursive partitioning and spline fitting in an optimal way. The algorithm finds the ideal knot positions for the splines and, thus, the best number of polynomial pieces to fit the data autonomously. With that we can correct the ICRF2 a priori coordinates for our analysis and eliminate the systematics in the position estimates. This allows us to introduce also special handling sources into the datum definition, leading to on average 30 % more sources in the datum. We find that not only the CPO can be improved by more than 10 % due to the improved geometry, but also the station positions, especially in the early years of VLBI, can benefit greatly.     

Similarity of electrophoretic dissolved protein spectra from coastal to pelagic seawaters

Dissolved proteins in seawater samples collected from a coastal area of Tokyo Bay, Sagami Bay and a location off the Kuroshio Current were investigated by one-dimensional sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and high resolution two-dimensional electrophoresis (2-DE). Four to nine protein bands were detected in SDS-PAGE in the apparent molecular weight (MW) range from 12 kilo Dalton (kDa) to 49 kDa. The 2-DE technique distinguished 10 to 46 protein spots exhibiting isoelectric point (pI)/MW ranging 4.3–9.2/12–63 kDa. The elecrophoretic patterns were similar between the coastal and pelagic samples, as well as previously reported patterns from various pelagic areas. The close similarity of electrophoretic mobility on both SDS-PAGE and 2-DE gels indicates the compositional homogeneity of dissolved proteins in seawater throughout a broad range of marine environments. Proteinaceous dissolved organic matter (DOM) that was unresolved and smeared staining characteristics on both SDS-PAGE and 2-DE gels was first observed in Tokyo Bay waters in the present study and its possible sources are discussed. Although the two protein species, 48 kDa and 39 kDa proteins, have been identified as homologues of Porin P and low molecular weight-alkaline phosphatase of Pseudomonas aeruginosa PAO1, respectively, four strains of P. aeruginosa and two species of Pseudomonas spp. have been newly identified as the source organisms of these proteins using the N-terminal amino acid sequence data determined in previous studies.     

Sandbank occurrence on the Dutch continental shelf in the North Sea

Sandbanks, the largest of bed patterns in shallow sandy seas, pose a potential risk to shipping. They are also valuable elements of natural coastal protection, dissipating the energy of waves. In the Southern Bight of the North Sea, several sandbank areas have been reported in the literature. However, based on an objective crest–trough analysis of the bathymetry of the Dutch continental shelf, the present study shows that sandbanks are more widespread than commonly considered. These banks are relatively low, presumably explaining why they have not been documented before. This widespread occurrence of sandbanks in the North Sea is in agreement with theoretical predictions based on stability analysis techniques. The possible interference between large-scale human activity and low-amplitude open-shelf ridges implies that one should be careful not to overlook these patterns if none should appear in a preliminary (visual) assessment. The only part of the Southern Bight in which no ridges can be seen is a circular area with a diameter of about 50 km near the mouth of the river Rhine. Here, freshwater outflow affects the direction of tidal ellipses and residual flow, and suppresses the formation of open ridges.     

A high-resolution geophysical investigation of sediment distribution controlled by catchment size and tides in a multi-basin turbid outwash fjord: Simpson Bay,Prince William Sound,Alaska

Surficial sediment distribution within Simpson Bay is a function of antecedent bedrock and recently deposited glacial geology, as well as active physical processes both within Simpson Bay and Prince William Sound (PWS). Simpson Bay is a turbid, outwash fjord located in northeastern PWS, Alaska. Freshwater from heavy precipitation, and the melting of high alpine glaciers enter the bay through bay head rivers and small shoreline creeks. The catchment has a high watershed/basin surface area ratio (∼8:1), and easily erodible bedrock that contribute to high sediment loads. The system can be divided into three discrete basins, each with specific morphologic and circulatory characters. Side scan sonar, swath bathymetry, and seismic profiles reveal that bathymetric highs are areas of outcropping glacial surfaces. High backscatter coupled with surface grab samples reveal these surfaces to be composed of coarse sediment and bedrock outcrops. Bathymetric lows are areas of low backscatter, and grab samples reveal these areas to be ponded deposits of organic-rich estuarine muds. The data provide evidence of terminal morainal bank systems, and glacial grounding line deposits at the mouth of the bay and rocky outcrops were identified as subsurface extensions of aerial rocky promontories. Radioisotope analyses of short cores reveal that the bay has an average accumulation rate of approx. 0.5 cm year⁻¹, but that this varies in function of the watershed/basin surface area ratios of the different basins. The interaction of tidal currents and sediment source drives sediment distribution in Simpson Bay. Hydrographic data reveal high spatial variability in surface and bottom currents throughout the bay. Subsurface currents are tide dominated, but generally weak (5–20 cm s⁻¹), while faster currents are found along shorelines, outcrops, and bathymetric highs. Bathymetric data reveal steep slopes with little to no modern sediment throughout the bay, suggesting lack of deposition due to tidal currents.     

Molecular ecological study of <Emphasis Type="Italic">Siganus spinus</Emphasis> and <Emphasis Type="Italic">S. guttatus</Emphasis> from Okinawan waters based on mitochondrial DNA control region sequences

The mitochondrial DNA (mtDNA) control region was sequenced to examine the genetic variability and gene flow of juvenile Siganus spinus and S. guttatus. In total, 461 nucleotide sequences were obtained from 69 specimens of juvenile S. spinus from Okinawa Island and Ishigaki Island, in which 17 variable sites and 22 haplotypes were identified. Haplotype diversity (h) was high (0.9244 in Okinawa and 0.8984 in Ishigaki), whereas nucleotide diversity (π) was low (0.0063 in Okinawa and 0.0059 in Ishigaki). The two populations were not genetically distinct. Siganus guttatus, which do not form large schools at recruitment, in contrast S. spinus, were also analyzed by studying 152 individuals collected off Okinawa Island, Miyako Island, and Ishigaki Island. Of 476 nucleotide sequences, 50 were variable, and 42 haplotypes were identified. Genetic variability values were high (h = 0.8766 and π = 0.0151 in Okinawa; h = 0.9640 and π = 0.0192 in Miyako; h = 0.9161 and π = 0.0199 in Ishigaki). The Okinawa population was genetically isolated from the Miyako and Ishigaki populations. As a result, genetic diversity was high for each of these siganid populations despite their being target species for fisheries; however, the degree of inter-population gene flow was higher for S. spinus than S. guttatus, suggesting that these species exhibit different dispersal strategies.     

Late quaternary seismic stratigraphy and active faults of the Gulf of İzmit (NE Marmara Sea)

The Upper Quaternary seismic stratigraphy and active faults of the Gulf of İzmit were investigated by means of high-resolution shallow seismic profiling data in the source region of 1999 İzmit earthquake. High-resolution seismic reflection data correlated with borehole data indicate that the stratigraphy of İzmit Bay consists of three distinct depositional sequences formed in response to middle Pleistocene-Holocene sea-level changes. Reflector R, separating the pre-Holocene sequences (1 and 2) from the Holocene sequence (3), represents an erosional unconformity produced by the subaerial fluvial erosion of the continental shelves at the time of the last glacial maximum. Occasional, anomalous reflections (acoustic turbidity) observed within the Holocene sequence are interpreted as gas accumulations. The maximum thickness of the Holocene sediments is found to be about 25 m. The isopach map of Holocene sediment implies that the thickness of the Holocene decreases from the east towards the central and western basins of İzmit Bay. Two distinct fault systems are interpreted in İzmit Bay. The main fault system extending roughly in an E-W direction along the Gulf of İzmit is an active right lateral strike slip fault with a normal component. The secondary faults are normal faults striking in different directions and these are identified as being both active and inactive. In addition, prominent compressive features are identified in the seismic cross-sections of some profiles acquired to the east of Hersek Peninsula where the focal mechanisms of the aftershocks of the 1999 İzmit earthquake also reveal predominantly reverse faulting mechanisms, as identified by a local dense seismic network.