δ18O and δ13C in fossil shells of Radix sp. from the sediment succession of a dammed palaeo‐lake in the Yarlung Tsangpo valley,Tibet, China

A series of confirmed and suspected dammed palaeo‐lake sedimentary successions is scattered within the middle Yarlung Tsangpo valley in Tibet. However, the chronology, the genesis of the dam and its location, the water level of the dammed lake, the process of dam failure and the spatiotemporal relationships between the sedimentary successions remain controversial. Here, we focus on one sedimentary succession of the suspected dammed palaeo‐lake at Xigazê. We measured the grain‐size distribution, magnetic susceptibility, organic and inorganic carbon content, and δ¹³C_org and δ¹⁵N_total ratios of the sediments. In addition, we measured the δ¹⁸O_shell and δ¹³C_shell values of modern and fossil Radix sp. shells, and the δ¹⁸O_water and δ¹³C_DIC values of the ambient water with different hydrological regimes. The results indicate that the δ¹⁸O_shell values of modern Radix sp. and the δ¹⁸O_water of the ambient water body significantly depend on its hydrological status. In addition, a strong positive relationship was observed between δ¹⁸O_shell values of modern Radix sp. shells and the δ¹⁸O_water of the ambient water on the Tibetan Plateau. According to this correlation, the δ¹⁸O_water values of the palaeo‐water body are reconstructed using the δ¹⁸O_shell values of Radix sp. fossil shells in the Xigazê section. Further, based on the δ¹⁸O_shell values of fossil Radix sp., the reconstructed δ¹⁸O_water of the palaeo‐water body and the specific habitats of Radix sp., we infer that the sedimentary succession in the Xigazê broad valley was mainly formed within the backwater terminal zone of a dammed palaeo‐lake and that the elevation of the water level of the lake was approximately 3811 m a.s.l. AMS ¹⁴C dating indicates that the deposits of the dammed palaeo‐lake were formed at about 33–22 cal. ka BP. Finally, the presence of Radix sp. fossil shells within the Xigazê section suggests that Radix sp. survived the late Last Glacial Period on the Tibetan Plateau.     

Target setting and allocation of carbon emissions abatement based on DEA and closest target: an application to 20 APEC economies

Regarded as an effective method for treating the global warming problem, carbon emissions abatement (CEA) allocation has become a hot research topic and has drawn great attention recently. However, the traditional CEA allocation methods generally set efficient targets for the decision-making units (DMUs) using the farthest targets, which neglects the DMUs’ unwillingness to maximize (minimize) some of their inputs (outputs). In addition, the total CEA level is usually subjectively determined without any consideration of the current carbon emission situations of the DMUs. To surmount these deficiencies, we incorporate data envelopment analysis and its closest target technique into the CEA allocation problem. Firstly, a two-stage approach is proposed for setting the optimal total CEA level for the DMUs. Then, another two-stage approach is given for allocating the identified optimal total CEA among the DMUs. Our approach provides more flexibility when setting new input and output targets for the DMUs in CEA allocation. Finally, the proposed approaches are applied for CEA target setting and allocation for 20 Asia-Pacific Economic Cooperation economies.

     

Piecewise prediction model for watershed‐scale erosion and sediment yield of individual rainfall events on the Loess Plateau,China

Establishing a universal watershed‐scale erosion and sediment yield prediction model represents a frontier field in erosion and soil/water conservation. The research presented here was conducted on the Chabagou watershed, which is located in the first sub‐region of the hill‐gully area of the Loess Plateau, China. A back‐propagation artificial neural model for watershed‐scale erosion and sediment yield was established, with the accuracy of the model, then compared with that of multiple linear regression. The sensitivity degree of various factors to erosion and sediment yield was quantitatively analysed using the default factor test. On the basis of the sensitive factors and the fractal information dimension, the piecewise prediction model for erosion and sediment yield of individual rainfall events was established and further verified. The results revealed the back‐propagation artificial neural network model to perform better than the multiple linear regression model in terms of predicting the erosion modulus, with the former able to effectively characterize dynamic changes in sediment yield under comprehensive factor conditions. The sensitivity of runoff erosion power and runoff depth to the erosion and sediment yield associated with individual rainfall events was found to be related to the complexity of surface topography. The characteristics of such a hydrological response are thus closely related to topography. When the fractal information dimension is greater than the topographic threshold, the accuracy of prediction using runoff erosion power is higher than that of using runoff depth. In contrast, when the fractal information dimension is smaller than the topographic threshold, the accuracy of prediction using runoff depth is higher than that of using runoff erosion power. The developed piecewise prediction model for watershed‐scale erosion and sediment yield of individual rainfall events, which introduces runoff erosion power and runoff depth using the fractal information dimension as a boundary, can be considered feasible and reliable and has a high prediction accuracy. Copyright © 2013 John Wiley & Sons, Ltd.     

Numerical and theoretical research on stress distribution in the loosening zone of the trapdoor problem

The traditional theory of soil arching effect was developed on the assumption that stress distribution in the loosening zone is uniform. However, because of the deflection of principal stress' direction, the stress distribution in the loosening zone is actually ununiform. For the evaluation of principal stress axis deflection and stress redistribution, a discrete element method numerical model of trapdoor problem is established for the simulation of soil arching effect. Based on the numerical results, an arc shape of major principal stress trajectory and uniform horizontal stress distribution at the same depth of the loosening zone are adopted. An analytical model is raised to estimate the average loosening earth pressure acting on the trapdoor and stress distribution in the loosening zone at a limit state. In addition, comparison studies are carried out between the predictions of the proposed solutions and discrete element method numerical results as well as available model test results, thereby validating the accuracy of the proposed theoretical model. Both numerical and theoretical results indicate that the vertical stress distribution in the loosening zone is obviously ununiform. The load acting in the middle of loosening zone is transferred toward two sides so that the vertical stress distribution in loosening zone is concave.     

Prediction of the South China Sea Dipole Using SSA-MEM

ABSTRACT

A dipole structure appears in the sea surface height off the central coast of Vietnam during boreal summer in the South China Sea. This dipole, which possesses a chlorophyll signature associated with higher phytoplankton concentrations arising from nutrient upwelling, is important for the productivity of local fisheries. Multi-satellite sea level anomalies are used to investigate the life cycle of the dipole structure. By applying empirical orthogonal function (EOF) analysis, the third EOF mode (EOF 3) is found to represent the major variations of the dipole structure. By removing the temporal noise of EOF 3, a South China Sea dipole index is defined. This index captures the life cycle of the dipole including its generation, mature strength, and final termination. Both one-dimensional and two-dimensional forecasts are generated using a statistical forecasting method that combines singular-spectrum analysis and the maximum entropy method. The appearance of the dipole structure can be predicted with an accuracy of 78% at one-month lead times and an accuracy of 61% at one-year lead times.     

One-dimensional consolidation of soil under multistage load based on continuous drainage boundary

In engineering practice, a rapid loading rate can result in ground failure when the strength of soft soils is relatively low, and a multistage loading scheme is always utilized to deal with this situation. Firstly, under a multistage load and the continuous drainage boundary, an analytical solution of excess pore-water pressure and consolidation degree is obtained by virtue of the superposition formula of excess pore-water pressure, and a more general continuous drainage boundary under arbitrary time-dependent load is developed. Then, a comparison with existing analytical solutions is conducted to verify the present solution. A preliminary attempt on applying the continuous drainage boundary into the finite element model is made, and the feasibility of the numerical model for the one-dimensional consolidation under the continuous drainage boundary is verified by comparing the results calculated by FEM with that from present analytical solution. Finally, the consolidation behavior of soil is investigated in detail for different int erface parameters or loading scheme. The results show that, in land reclamation projects, a horizontal drain should be placed close to the boundary with a smaller interface parameter to improve the consolidation efficiency. The degree of consolidation is also related to the applied time-dependent load and interface parameters.     

Modelling atmospheric and hydrologic processes for assessment of meadow restoration impact on flow and sediment in a sparsely gauged California watershed

The restoration of meadowland using the pond and plug technique of gully elimination was performed in a 9‐mile segment along Last Chance Creek, Feather River Basin, California, in order to rehabilitate floodplain functions such as mitigating floods, retaining groundwater, and reducing sediment yield associated with bank erosion and to significantly alter the hydrologic regime. However, because the atmospheric and hydrological conditions have evolved over the restoration period, it was difficult to obtain a comprehensible evaluation of the impact of restoration activities by means of field measurements. In this paper, a new use of physically based models for environmental assessment is described. The atmospheric conditions over the sparsely gauged Last Chance Creek watershed (which does not have any precipitation or weather stations) during the combined historical critical dry and wet period (1982–1993) were reconstructed over the whole watershed using the atmospheric fifth‐generation mesoscale model driven with the US National Center for Atmospheric Research and US National Center for Environmental Prediction reanalysis data. Using the downscaled atmospheric data as its input, the watershed environmental hydrology (WEHY) model was applied to this watershed. All physical parameters of the WEHY model were derived from the existing geographic information system and satellite‐driven data sets. By comparing the prerestoration and postrestoration simulation results under the identical atmospheric conditions, a more complete environmental assessment of the restoration project was made. Model results indicate that the flood peak may be reduced by 10–20% during the wet year and the baseflow may be enhanced by 10–20% during the following dry seasons (summer to fall) in the postrestoration condition. The model results also showed that the hydrologic impact of the land management associated with the restoration mitigates bank erosion and sediment discharge during winter storm events. Copyright © 2013 John Wiley & Sons, Ltd.     

Carboniferous eclogite and garnet–omphacite granulite from northeastern Hainan Island,South China: Implications for the evolution of the eastern Palaeo‐Tethys

High‐P (HP) eclogite and associated garnet–omphacite granulite have recently been discovered in the Mulantou area, northeastern Hainan Island, South China. These rocks consist mainly of garnet, omphacite, hornblende, quartz and rutile/ilmenite, with or without zoisite and plagioclase. Textural relationships, mineral compositions and thermobarometric calculations demonstrate that the eclogite and garnet–omphacite granulite share the same three‐stage metamorphic evolution, with prograde, peak and retrograde P?T conditions of 620–680°C and 8.7–11.1 kbar, 820–860°C and 17.0–18.2 kbar, and 700–730°C and 7.1–8.5 kbar respectively. Sensitive high‐resolution ion microprobe U–Pb zircon dating, coupled with the identification of mineral inclusions in zircon, reveals the formation of mafic protoliths before 355 Ma, prograde metamorphism at c. 340–330 Ma, peak to retrograde metamorphism at c. 310–300 Ma, and subsequent pegmatite intrusion at 295 Ma. Trace element geochemistry shows that most of the rocks have a MORB affinity, with initial ε_Nd values of +2.4 to +6.7. As with similar transitional eclogite–HP granulite facies rocks in the thickened root in the European Variscan orogen, the occurrence of relatively high P?T metamorphic rocks of oceanic origin in northeastern Hainan Island suggests Carboniferous oceanic subduction leading to collision of the Hainan continental block, or at least part of it, with the South China Block in the eastern Palaeo‐Tethyan tectonic domain.     

Generation of continuous surface soil moisture dataset using combined optical and thermal infrared images

Surface soil moisture (SSM) is a critical variable for understanding water and energy flux between the atmosphere and the Earth's surface. An easy to apply algorithm for deriving SSM time series that primarily uses temporal parameters derived from simulated and in situ datasets has recently been reported. This algorithm must be assessed for different biophysical and atmospheric conditions by using actual geostationary satellite images. In this study, two currently available coarse‐scale SSM datasets (microwave and reanalysis product) and aggregated in situ SSM measurements were implemented to calibrate the time‐invariable coefficients of the SSM retrieval algorithm for conditions in which conventional observations are rare. These coefficients were subsequently used to obtain SSM time series directly from Meteosat Second Generation (MSG) images over the study area of a well‐organized soil moisture network named REMEDHUS in Spain. The results show a high degree of consistency between the estimated and actual SSM time series values when using the three SSM dataset‐calibrated time‐invariable coefficients to retrieve SSM, with coefficients of determination (R²) varying from 0.304 to 0.534 and root mean square errors ranging from 0.020 m³/m³ to 0.029 m³/m³. Further evaluation with different land use types results in acceptable debiased root mean square errors between 0.021 m³/m³ and 0.048 m³/m³ when comparing the estimated MSG pixel‐scale SSM with in situ measurements. These results indicate that the investigated method is practical for deriving time‐invariable coefficients when using publicly accessed coarse‐scale SSM datasets, which is beneficial for generating continuous SSM dataset at the MSG pixel scale.