The method of design for seismic data database system based on tree structure

Introduction In recent years, with the development of earthquake observation technology, increasing ofobservation stations and improvement of observation instruments which are digitalized and con-nected by network, a great deal of data is recorded, to some extend, which brings difficulty for usto manage and store them. It leads to traditional methods, which use the file system to managemass data, could not satisfy our requirement, and it is necessary to find a new method in place oftradit…     

The dependence of response spectrum on the tectonic ambient shear stress field

Introduction The acceleration response spectrum and peak ground acceleration are the necessary and im-portant parameters in earthquake-resistant design at present. They are still active research field. With the increase of digital high accurate strong motion observation data, especially the earth-quakes of Loma Prieta (M=7.0) in 1989; Landers (M=7.3) in 1992; Big Bear (M=6.4) in 1994 and Northridge (M=6.7) in 1994 in USA; Kozani (M=6.6) earthquake and afteshocks in 1995 in Greece; Dinar…     

Thermodynamic conditions of framework grain dissolution of clastic rocks and its application in Kela 2 gas field

Feldspar and clastic debris are the most important constituent framework grains of sedimentary clastic rocks and their chemical dissolution plays an essential role in the formation and evolution of the secondary pore in the reservoir rocks. On the basis of thermodynamic phase equilibrium, this study investigates the chemical equilibrium relationships between fluid and various plagioclase and K-feldspar in diagenesis of the sediments, particularly, the impact of temperature and fluid compositions (pH, activity of K+, Na+, Ca2+ and so on) on precipitation and dissolution equilibria of feldspars. Feldspar is extremely easily dissolved in the acid pore water with a low salinity when temperature decreases. The dissolution of anorthite end-member of plagioclase is related to the Ca content of the mineral and the fluid, higher Ca either in the mineral or in the fluid, easier dissolution of the feldspar. Moreover, the dissolution of albite end-member of plagioclase is related to Na of both the mineral and fluid,     

Source time-function as discriminant using empirical Green’s function

Since the sign up of CTBT (Comprehensive Test Ban Treaty), the nuclear monitoring and distinguishing has gained great attention by the treaty countries. Seismology is one of the primary technical means available for monitoring compliance to a CTBT. However, there does not exist a single criterion, so far, that can effectively distinguish explorations from earthquakes. It has been known that source time function (abbreviated to STF) of an underground nuclear explosion contains important p…     

鄂尔多斯盆地南部的黄土塬区地震资料处理与解释,第一部分:地震资料处理

Branching river channels and the coexistence of valleys, ridges, hiils, and slopes＇as the result of long-term weathering and erosion form the unique loess topography. The Changqing Geophysical Company, working in these complex conditions, has established a suite of technologies for high-fidelity processing and fine interpretation of seismic data. This article introduces the processes involved in the data processing and interpretation and illustrates the results.     

Converted-wave seismology in anisotropic media revisited,Part I: Basic theory

We have developed new basic theories for calculating the conversion point and the travel time of the P-SV converted wave (C-wave) in anisotropic, inhomogeneous media. This enables the use of conventional procedures such as semblance analysis, Dix-type model building and Kirchhoff summation, to implement anisotropic processing, and makes anisotropic processing affordable. Here we present these new developments in two parts: basic theory and application to velocity analysis and parameter estimation. This part deals with the basic theory, including both conversion-point calculation and moveout analysis. Existing equations for calculating the PS-wave (C-wave) conversion point in layered media with vertical transverse isotropy (VTI) are strictly limited to offsets about half the reflector depth (an offset-depth ratio, xlz, of 0.5), and those for calculating the C-wave traveltimes are limited to offsets equal to the reflector depth (x/z=l.0). In contrast, the new equations for calculating the conversion-point extend into offsets about three-times the reflector depth (x/z=3.0), those for calculating the C-wave traveltimes extend into offsets twice the reflector depth (x/z=2.0). With the improved accuracy, the equations can help in C-wave data processing and parameter estimation in anisotropic, inhomogeneous media. This work is funded by the Edinburgh Anisotropy Project (EAP) of the British Geological Survey. First author: Xiangyang Li, Mr. Li is currently a professorial research seismologist (Grade 6) and technical director of the Edinburgh Anisotropy Project in the British Geological Survey. He also holds a honorary professorship in multicomponent seismology at the School of Geosciences, University of Edinburgh. He received his BSc(1982) in Geophysics from Changchun Geological Institute, China, an MSc (1984) in applied geophysics from East China Petroleum Institute (now known as the China University of Petroleum), and a PhD (1992) in seismology from the University of Edinburgh. During 1984–1987, he worked as a lecturer with the East China Petroleum Institute. Since 1991, he has been employed by the British Geological Survey. His research interests include seismic anisotropy and multicomponent seismology.     

Assessing the Comparability of Ammonium,Nitrate and Sulfate Concentrations Measured by Three Air Quality Monitoring Networks

Airborne fine particulate matter across the United States is monitored by different networks, the three prevalent ones presently being the Clean Air Status and Trend Network (CASTNet), the Interagency Monitoring of PROtected Visual Environment Network (IMPROVE) and the Speciation and Trend Network (STN). If combined, these three networks provide speciated fine particulate data at several hundred locations throughout the United States. Yet, differences in sampling protocols and samples handling may not allow their joint use. With these concerns in mind, the objective of this study is to assess the spatial and temporal comparability of the sulfate, nitrate and ammonium concentrations reported by each of these networks. One of the major differences between networks is the sampling frequency they adopted. While CASTNet measures pollution levels on seven-day integrated samples, STN and IMPROVE data pertain to 24-hour samples collected every three days. STN and IMPROVE data therefore exhibit considerably more short-term variability than their CASTNet counterpart. We show that, despite their apparent incongruity, averaging the data with a window size of four to six weeks is sufficient to remove the effects of differences in sampling frequency and duration and allow meaningful comparison of the signals reported by the three networks of concern. After averaging, all the sulfate and, to a lesser degree, ammonium concentrations reported are fairly similar. Nitrate concentrations, on the other hand, are still divergent. We speculate that this divergence originates from the different types of filters used to collect particulate nitrate. Finally, using a rotated principal component technique (RPCA), we determined the number and the geographical organization of the significant temporal modes of variation (clusters) detected by each network for the three pollutants of interest. For sulfate and ammonium, the clusters’ geographical boundaries established for each network and the modes of variations within each cluster seem to correspond. RPCA erformed on nitrate concentrations revealed that, for the CASTNet and IMPROVE networks, the modes of variation do not correspond to unified geographical regions but are found more sporadically. For STN, the clustered areas are unified and easily delineable. We conclude that the possibility of jointly using the data collected by CASTNet, IMPROVE and STN has to be weighed pollutant by pollutant. While sulfate and ammonium data show some potential for joint use, at this point, combining the nitrate data from these monitoring networks may not be a judicious choice.     

Observed Evolution of Linear and Nonlinear Effects at the Dahan Downhole Array,Taiwan: Analysis of the September 21, 1999 M 7.3 Chi-Chi Earthquake Sequence

— In this paper, the site characteristics of the Dahan downhole array are studied by analyzing the September 21, 1999 M 7.3 Chi-Chi earthquake sequence including the main shock and some aftershocks. The four-level array (0 m, 50 m, 100 m and 200 m) is located to the north of Hualien City in eastern Taiwan. Polarization analysis is used to check the orientation errors of the seismometers at different levels of depth. If the surface instrument is chosen as reference, the angle between the major polarization axes of the surface and any downhole records is the orientation error that must be corrected for the downhole accelerographs. The orientation errors at depths of 50 m, 100 m and 200 m are 32°, 120° and –84°. After the corrections, the coherency between the surface and downhole records is substantially improved. Spectral ratio analysis shows that the predominant frequency of the Chi-Chi main shock shifts to a lower frequency. We also simulate ground motions at different depths by using the Haskell method with a linear velocity structure model. The record at surface is chosen as the input motion. Compared with the observed data, ground acceleration can be well reproduced for the aftershocks (weak-motion events) of the September 21, 1999 M 7.3 Chi-Chi earthquake. However, for the Chi-Chi main shock, the synthetic waveform cannot match well with the observation neither in amplitude nor in phase. This indicates that large ground shaking probably induced the nonlinear site effect at that time, and the model used cannot support it.Acknowledgement. The authors would like to express their thanks to Dr. L.F. Bonilla and one anonymous reviewer for their valuable suggestions. This research was supported by the National Science Council under grant number NSC 89-2921-M-194-007. The Institute of Earth Sciences, Academia Sinica supplied the strong-motion data. The support of these organizations is gratefully acknowledged.     

REE and (э)Nd of clay fractions in sediments from the eastern Pacific Ocean: Evidence for clay sources

Clay fractions in the non-calcareous surface sediments from the eastern Pacific were analyzed for clay minerals, REE and 143Nd/144Nd. Montmorillonite/illite ratio (M/I ratio), total REE contents ((REE), LREE/HREE ratio and cerium anomaly (бCe) may effectively indicate the genesis of clay minerals. Clay fractions with M/I ratio >1, бCe (0.85, (REE (400 μg/g, LREE/HREE ratio (4, and REE patterns similar to those of pelagic sediments are terrigenous and autogenetic mixed clay fractions and contain more autogenetic montmorillonite. Clay fractions with M/I ratio <1, бCe=0.86 to 1.5, ΣREE=200 to 350 μg/g, LREE/HREE ratio (6 and REE distribution patterns similar to that of China loess are identified as terrigenous clay fraction. The 143Nd/144Nd ratios or (э)Nd values of clay fractions inherit the features of terrigenous sources of clay minerals. Clay fractions are divided into 4 types according to (э)Nd values. Terrigenous clay minerals of type I with the (э)Nd values of -8 to -6 originate mainly from North American fluvial deposits. Those of type II with the (э)Nd values of -9 to -7 are mainly from the East Asia and North American fluvial deposits. Those of type III with (э)Nd values of -6 to -3 could come from the central and eastern Pacific volcanic islands. Those of type IV with (э)Nd values of -13 to -12 may be from East Asia eolian. The terrigenous and autogenetic mixed clay fractions show patchy distributions, indicating that there are volcanic or hot-spot activities in the eastern Pacific plate, while the terrigenous clay fractions cover a large part of the study area, proving that the terrigenous clay minerals are dominant in the eastern Pacific.     

Characteristics and genesis of maghemite in Chinese loess and paleosols: Mechanism for magnetic susceptibility enhancement in paleosols

Morphological characteristics and microstructures of magnetic minerals extracted from Chinese loess and paleosols were investigated using powder X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM). Our results indicate that maghemite in loess–paleosol sequences was transformed from magnetite through oxidation of magnetite. Maghemite transformed from eolian magnetite during chemical weathering has low-angle grain boundaries among maghemite nano-crystals. Some nano-crystalline maghemites with nanoporous texture resulted from microbe-induced precipitation of magnetite or transformation of poorly crystalline ferric Fe (oxy)hydroxides in presence of Fe-reducing bacteria. Aggregates of euhedral maghemite nano-crystals were transformed from magnetite magnetosomes. Both microbe-induced nanoporous magnetite and microbe-produced magnetite magnetosomes are directly related to microbial activities and pedogenesis of the paleosols. It is proposed that the formation of nano-crystalline maghemite with superparamagnetic property in paleosol results in the enhancement of magnetic susceptibility, although the total amount (weight percent) of magnetic minerals in both paleosol and loess units is similar. Our results also show that nano-crystalline and nanoporous magnetite grains prefer to transform into maghemite in semi-arid soil environments instead of hematite, although hematite is a thermodynamically stable phase. This result also indicates that a decrease in crystal size will increase stability of maghemite. It is also inferred that surface energy of maghemite is lower than that of hematite.