Tectono-sedimentary evolution of the Miocene Oued Dayr Formation (Ghomaride Complex,Internal Domain of the Maghrebian Rif Belt,Morocco)

This work deals with sedimentological, petrographic, and structural analyses of a middle Miocene late-orogenic sedimentary cycle, denoted Oued Dayr Formation, recognized in the Rifian sector of the Maghrebian Chain (Morocco). The analyzed Formation (75 m thick) starts with 15–20 m of light colored polymict conglomerates, with minor sandstone beds, lying on the Paleozoic basement and Mesozoic cover of the Ghomaride Nappe. Facies analysis indicates a fining-upward deposition in a marine environment characterized by increasing deepening, reflecting a subsidence rate that exceeds sedimentary supply. Petrographic analysis points out that sandstones are represented by litharenites originated by erosion of recycled orogen. The conglomerates pebbles and cobbles consist of Alpine low- to high-grade metamorphic rocks as metarenites, phyllites, mylonitic quartzites, micaschists, augen gneisses deriving from the exhumed deep metamorphic basement, the overlying metasedimentary of the Sebtide Nappes and of sedimentary rocks as sandstones, jaspes, limestones, and shales deriving from the Ghomaride Nappes and their sedimentary cover. Data reveal mixed provenance indicating that the Oued Dayr Formation was fed by the Internal Nappes stack of the Maghrebian Chain. Structural analysis shows that the Oued Dayr Formation accumulated in a Thrust-Top basin, during an early extension (D₀ phase), recorded by synsedimentary normal faults within middle Langhian deposits on the rear of the Internal Nappes stack. Subsequent ductile and brittle compressional (D₁, D₂, D₃) and extensional (D₄) deformation phases occurred during and/or after the stacking, exhumation, and early unroofing of Sebtide Complex coeval with the opening of the western Mediterranean back-arc basins since middle Miocene time.     

Sensitivity analysis for the GALDIT method based on the assessment of vulnerability to pollution in the northern Sfax coastal aquifer,Tunisia

Coastal aquifer of northern Sfax (Tunisia) suffers from the high risk to seawater intrusion and the water quality degradation due to the overexploitation. Hence, assessing the study area vulnerability to pollution is highly crucial so as to protect the groundwater resources. The assessment has been performed by applying the GALDIT method using Geographic Information System (GIS) software and multi-criteria evaluation techniques, and the sensitivity analysis approach to evaluate the effect of each GALDIT parameter on the vulnerability assessment. The GALDIT vulnerability map classifies the study area into three vulnerability classes: low vulnerability (30–50), moderate vulnerability (50–70), and high vulnerability (70–90), which represent 5, 30, and 65 % of the study area, respectively. The map illustrates that the coastal zones of the aquifer are the most threatened areas. The sensitivity analysis results show that the aquifer hydraulic conductivity (A) and the thickness of the aquifer (T) represent the determining factors in the modified vulnerability model. The real weight was used to elaborate the modified GALDIT model which was correlated with resistivity values for validation. This study could serve as a scientific basis for sustainable land planning and groundwater management in the study area.     

<Emphasis>H</Emphasis>ydrological variability of the <Emphasis>S</Emphasis>oummam watershed <Emphasis>(N</Emphasis>ortheastern <Emphasis>A</Emphasis>lgeria<Emphasis>)</Emphasis> and the possible links to climate fluctuations

The long-term variability of rainfall in the Soummam watershed (NE Algeria) has been analysed over the past 108 years using continuous wavelet method in order to identify the interannual modes controlling the rainfall variability. Statistical analyses of rainfall timeseries have shown its distribution following five periods of time, limited by a series of discontinuities around 1935, 1950, 1970 and 1990. The continuous wavelet transform have demonstrated different low frequency modes: 2–4, 4–8, 8–16 and 16–32 years.The annual band is expanded during the full study period with some pics around 1905, 1920–1935 and 1960; it shows a negative long-term trend, in particular since the period 1970–1990 when a major change has been identified. Then, the relationships between climate patterns of North Atlantic Oscillation (NAO) and Southern Oscillation Index (SOI) and the hydrological variability in the frequency domain have been investigated; they have shown a mean explained variance of 40 and 24 %, respectively. Such variances are less obvious for the annual mode and increase for the interannual frequencies. The coherence suffer from high perturbations since the period 1970–1990 when the NAO (SOI) shifts from negative (positive) phases to positive (negative) ones. Such anomalies are responsible for significant changes of rainfall variability, emphasising the global warming effects.     

Investigation of moment-rotation relation in different joint types and evaluation of their effects on segmental tunnel lining

This paper presents the results of a numerical study that has been performed to investigate the different joint types that affect the moment-rotation relation and ultimate bending moment capacity of a joint. A 3D finite element method was adapted to establish elaborate numerical models of segments. To evaluate the possible differences in moment-rotation behavior between different joint types, 10 different joint types were simulated. Additionally, the effect of different joint types on behavior of a lining ring was investigated. The validity of the peridynamic simulation was tested by comparing results obtained in this paper against the results obtained in a study performed by Hordijk and Gijsbers. Observations of the results demonstrate that in a flat joint, the expanding of joint height increased the rotation stiffness of the joint in the linear branch, and accordingly, the ultimate bending moment of the joint increased. In the ring model, it was observed that the expanding of joint height led to the decreased of ring displacement and stress concentration in the joint. Whenever there were full surface contacts (contact two segment in total cross section) in the joints, the rotation stiffness of the joints in the linear branch became equal, and, as a result, the displacement in the ring model was the same in all joint types. In addition, it was observed that using a convex joint in the ring model increases the displacement of the ring. The ultimate bending moment of bolted joints was higher than that of joints without bolts, especially in the case of a negative moment.     

Characterization of the Tertiary reservoir in Khabbaz Oil Field,Kirkuk area,Northern Iraq

Tertiary reservoir represented by Jeribe, Anah, Azkand, and Azkand/Ibrahim formations has been studied from reservoir characterization point of view in Khabbaz Oil Field/Northern Iraq. Examined thin sections prepared from core rock samples which are selected from the wells Kz-8 and Kz-9 revealed the existence of different microfacies in which are varies types of porosity such as interparticle, intraparticle, moldic, vuggy, and fractures have been noticed. In addition to these different types of diagenetic features are represented mainly by cementation, dolomitization, recrystallization, and dissolution. The available log data for the wells Kz-11, Kz-14, and Kz-16 have been used in characterizing the reservoir properties of the studied formations. The detected lithologies from porosity logs showed domination of limestone, dolomitic limestone, and dolomites in addition to few thin beds of anhydrites in Jeribe Formation and thin beds of sand dominated lithologies in Azkand Formation. Clay content has been calculated from gamma ray log along the studied sections and appeared to be mostly of dispersed clay type as shown from density-neutron porosity crossplot of Thomas-Stieber. Correction from the effect of clay content has been done for all the measured sonic, density, and neutron porosities. The available porosity and permeability values which are measured from core tests in the well Kz-9 for the formations of Jeribe, Anah, and Azkand have been adapted to formalize the best equation for calculating permeability in the other studied wells which have no core test measurements but only log data (Kz-11, Kz-14, and Kz-16 wells). Depending on porosity, permeability, and shale content, the studied sections have been subdivided into seven reservoir units in the wells Kz-11 and Kz-16, and for eight reservoir units in the well Kz-14.     

南岭东段含稀土矿花岗岩体中暗色包体地质特征——以陂头岩体为例

在野外地质调查和室内综合研究的基础上,通过研究南岭东段风化壳淋积型矿中含稀土矿花岗岩层中暗色包体的地质特征,发现分布在岩体中的大量暗色包体具流面和流线构造,主要组成矿物为石英、辉石和斜长石,具典型的辉长结构。暗色包体低硅、钾和钠,高钙、铝、镁、铁、钛和锰,属亚碱性—铝不饱和型;富集U、La、Pr、Nd、Sm、Dy,亏损Nb、Sr、Zr、Hf、Ti等微量元素;REE总量低于寄主含矿花岗岩层稀土总量,Ce和Eu具有明显的负异常。这些特征说明暗色包体的原岩可能来自早期基性岩,其形成与燕山早期陂头岩体的分异演化关系密切。与南岭地区花岗岩中此类暗色包体进行对比,有助于在该区寻找稀土矿床和稀有金属矿床。     

基于稳定同位素的东太平洋大青鲨(Prionace glauca)营养级研究

碳、氮稳定同位素为分析淡水和海洋生态系统的生物营养关系提供了有力手段,但在大洋鱼类中的应用还很少。本研究以热带东太平洋大青鲨(Prionace glauca)整节脊椎骨作为样品(叉长范围153—242cm),运用稳定同位素技术,分析大青鲨的δ~(13)C值和δ~(15)N值及其变化,比较不同基线生物的选择对营养级计算的影响。结果表明,大青鲨δ~(13)C范围为–15.76‰—–13.41‰,最大差值2.35‰;δ~(15)N范围为10.62‰—17.72‰,最大差值7.1‰;δ~(13)C值和δ~(15)N值随个体长度的变化不明显(可能原因是样品鱼均为较大个体),性别间的差异不显著,但不同基线生物的选择对营养级计算值的影响较大。本文研究表明,通过整节脊椎骨的稳定同位素测定来获得大青鲨的摄食特征信息是可行的。由于基线生物对营养级计算的影响问题难以在短期内解决,今后可将相对营养级或营养级的变化作为重点,研究人类活动(如捕捞)对大洋鱼类摄食和营养级的影响。     

温度、盐度和光照对浒苔生长和光合作用的影响

Intensive Pyropia aquaculture in the coast of southwestern Yellow Sea and its subsequent waste, including disposed Ulva prolifera, was speculated to be one of the major sources for the large-scale green tide proceeding in the Yellow Sea since 2007. It was, however, unclear how the detached U. prolifera responded and resumed growing after they detached from its original habitat. In this study, we investigated the growth and photosynthetic response of the detached U. prolifera to various temperature, salinity and irradiance in the laboratory. The photosynthetic rate of the detached U. prolifera was significantly higher at moderate temperature levels(14–27°C)and high salinity(26–32), with optimum at 23°C and 32. Both low(14°C) and highest temperature(40°C), as well as low salinity(8) had adverse effects on the photosynthesis. Compared with the other Ulva species, U. prolifera showed higher saturated irradiance and no significant photoinhibition at high irradiance, indicating the great tolerance of U. prolifera to the high irradiance. The dense branch and complex structure of floating mats could help protect the thalli and reduce photoinhibition in field. Furthermore, temperature exerted a stronger influence on the growth rate of the detached U. prolifera compared to salinity. Overall, the high growth rate of this detached U. prolifera(10.6%–16.7% d~(–1)) at a wide range of temperature(5–32°C) and salinity(14–32) implied its blooming tendency with fluctuated salinity and temperature during floating. The environmental parameters in the southwestern Yellow Sea at the beginning of green tide were coincident with the optimal conditions for the detached U. prolifera.     

南极低温降解菌Shewanella sp. NJ49羟化酶分离纯化及最适产酶条件研究

羟化酶是细菌降解烷烃的关键酶,本文以南极低温降解菌Shewanella sp.NJ49为研究对象,通过硫酸铵沉淀、超滤浓缩及葡聚糖凝胶Sephadex G-75柱层析方法,分离纯化NJ49的羟化酶,获得了单一羟化酶组分,研究了温度、p H、表面活性剂和盐度等环境因素对NJ49羟化酶酶活活性影响。结果表明,羟化酶组分由α、β、γ三个亚基组成,分子质量分别为56,45和36 k D。NJ49最适产酶条件为:温度15℃、p H7.2、盐度55;不同类型表面活性剂对酶的活性影响效应不一,两性离子表面活性剂、阳离子表面活性剂、非离子表面活性剂对酶活没有作用,阴离子表面活性剂+非离子表面活性剂混和剂和阳离子表面活性剂+非离子表面活性剂混和剂能提高羟化酶的活性。     

高等级海况条件下移动式海上基地动力响应分析

针对半潜式超大型浮式结构中典型的移动式海上基地(Mobile Offshore Base,MOB)在高等级海况下的动力响应问题展开研究。在MOB结构"刚性模块-柔性连接构件(Rigid Modules and Flexible Connectors,RMFC)"模型的前提下,根据动力学基本原理,经理论推导并计算得到MOB分别在6、7、8级海况的随机波激励下,其上各模块的动力响应位移结果。详细分析了MOB结构同一模块在不同海况条件下的动力响应位移随浪向角及连接构件刚度的变化规律。研究成果可为半潜式超大型浮式结构动力响应研究及结构优化设计提供一定的技术支撑。