A new method for specular and diffuse pseudorange multipath error extraction using wavelet analysis

Multipath remains one of the major challenges in Global Navigation Satellite System (GNSS) positioning because it is considered the dominant source of ranging errors, which can be classified into specular and diffuse types. We present a new method using wavelets to extract the pseudorange multipath in the time domain and breaking it down into the two components. The main idea is an analysis-reconstruction approach based on application of both continuous wavelet transform (CWT) and discrete wavelet transform (DWT). The proposed procedure involves the use of L1 code-minus-carrier (CMC) observable where higher-frequency terms are isolated as residuals. CMC residuals are analyzed by applying the CWT, and we propose the scalogram as a technique for discerning time–frequency variations of the multipath signal. Unlike Fourier transform, the potential of the CWT scalogram for examining the non-stationary and multifrequency nature of the multipath is confirmed as it simultaneously allows fine detection and time localization of the most representative frequencies of the signal. This interpretation of the CWT scalogram is relevant when choosing the levels of reconstruction with DWT, allowing accurate time domain extraction of both the specular and diffuse multipath. The performance and robustness of the method and its boundary applicability are assessed. The experiment was carried out using a receiver of Campania GNSS Network. The results are given in which specular multipath error is achieved using DWT level 7 approximation component and diffuse multipath error is achieved using DWT level 6 denoised detail component.     

Optimization and Parametrical Investigation to Assess the Reconstitution of Different Types of Indian Sand Using Portable Travelling Pluviator

By using the air pluviation technique, it is aimed to achieve the desired relative density with uniform void ratio throughout the specimen in order to maintain the homogeneity and to avoid the spatial variability. Further, in order to achieve the maximum deposition intensity, a systematic optimization study has been carried out rigorously in a test tank to determine the diameter of the orifice to be employed for the sieve plates of different porosity and the number of sieve plates to be installed in the diffuser sieve sets. The study has been conducted with four different patterns of sieves with different porosity to achieve a wide range of relative densities for four different uniformly graded Indian sands. The dynamic penetrometer which is considered to be one of the cost effective instruments has been efficiently used to determine the soil resistance at various locations of the test tank for every given height of fall in order to check the uniformity of placement density throughout the sand bed. The study reveals that the sand beds of different relative densities could be achieved using different patterns of diffuser sieves at optimum sand flow rate without compromising the uniformity. The effect of height of fall as well as porosity of diffuser sieves on the relative density of different sands has been studied in detail. The deposition intensity and the relative density obtained from the present study are compared with the values available in the literature.     

Assessment and Prediction of Liquefaction Potential Using Different Artificial Neural Network Models: A Case Study

Soil liquefaction as a transformation of granular material from solid to liquid state is a type of ground failure commonly associated with moderate to large earthquakes and refers to the loss of strength in saturated, cohesionless soils due to the build-up of pore water pressures and reduction of the effective stress during dynamic loading. In this paper, assessment and prediction of liquefaction potential of soils subjected to earthquake using two different artificial neural network models based on mechanical and geotechnical related parameters (model A) and earthquake related parameters (model B) have been proposed. In model A the depth, unit weight, SPT-N value, shear wave velocity, soil type and fine contents and in model B the depth, stress reduction factor, cyclic stress ratio, cyclic resistance ratio, pore pressure, total and effective vertical stress were considered as network inputs. Among the numerous tested models, the 6-4-4-2-1 structure correspond to model A and 7-5-4-6-1 for model B due to minimum network root mean square errors were selected as optimized network architecture models in this study. The performance of the network models were controlled approved and evaluated using several statistical criteria, regression analysis as well as detailed comparison with known accepted procedures. The results represented that the model A satisfied almost all the employed criteria and showed better performance than model B. The sensitivity analysis in this study showed that depth, shear wave velocity and SPT-N value for model A and cyclic resistance ratio, cyclic stress ratio and effective vertical stress for model B are the three most effective parameters on liquefaction potential analysis. Moreover, the calculated absolute error for model A represented better performance than model B. The reasonable agreement of network output in comparison with the results from previously accepted methods indicate satisfactory network performance for prediction of liquefaction potential analysis.     

The Exhumation History of North Qaidam Thrust Belt Constrained by Apatite Fission Track Thermochronology: Implication for the Evolution of the Tibetan Plateau

Determining the spatio-temporal distribution of the deformation tied to the India-Eurasian convergence and the impact of pre-existing weaknesses on the Cenozoic crustal deformation is significant for understanding how the convergence between India and Eurasia contributed to the development of the Tibetan Plateau. The exhumation history of the northeastern Tibetan Plateau was addressed in this research using a new apatite fission track (AFT) study in the North Qaidam thrust belt (NQTB). Three granite samples collected from the Qaidam Shan pluton in the north tied to the Qaidam Shan thrust, with AFT ages clustering in the Eocene to Miocene. The other thirteen samples obtained from the Luliang Shan and Yuka plutons in the south related to the Luliang Shan thrust and they have showed predominantly the Cretaceous AFT ages. Related thermal history modeling based on grain ages and track lengths indicates rapid cooling events during the Eocene-early Oligocene and since late Miocene within the Qaidam Shan, in contrast to those in the Cretaceous and since the Oligocene-Miocene in the Luliang Shan and Yuka region. The results, combined with published the Cretaceous thermochronological ages in the Qaidam Shan region, suggest that the NQTB had undergo rapid exhumation during the accretions along the southern Asian Andean-type margin prior to the India-Eurasian collision. The Cenozoic deformation initially took place in the North Qaidam thrust belt by the Eocene, which is consistent with the recent claim that the deformation of the northeastern Tibetan Plateau initiated in the Eocene as a response to continental collision between India and Eurasia. The immediate deformation responding to the collision is tentatively attributed to the pre-existing weaknesses of the lithosphere, and therefore the deformation of the northeastern Tibetan Plateau should be regarded as a boundary-condition-dependent process.     

Genesis of the Sinian Solid Bitumen and its Significance for Hydrocarbon Accumulation in the Anyue Gas Field of the Sichuan Basin

正Objective Bitumen is generally associated with oil and gas,which was originally used as an indicator of hydrocarbon reservoirs.With the progress of organic geochemical measuring and testing techniques,bitumen,especially solid bitumen sampled from reservoirs,has been proved to be closely related to the evolution of hydrocarbon     

三峡工程对宜昌-监利河段水温情势的影响分析

三峡工程蓄水使得下游长江河道水温情势发生显著变化,并对下游生态环境产生重要影响。基于宜昌水文站14年的实测资料,采用纵向一维水温模型模拟分析了宜昌至监利300 km河道水温变化过程,探讨了不同蓄水期三峡工程下泄水温变化对坝下鱼类产卵场的影响程度。结果表明:①三峡工程蓄水后宜昌断面水温出现了平坦化及延迟现象,低温水和高温水效应明显;175 m蓄水期宜昌断面4月、12月,水温分别较蓄水前改变-4.3℃、3.7℃。②三峡工程的运行使得下游河道水气热交换量发生变化,但干流流量较大使得水温沿程恢复效果较弱;工程调蓄对坝下河段的影响占主导作用,三峡工程调蓄对监利断面4月、12月存在-3.2℃、3.0℃的温度影响。③三峡工程蓄水后,宜昌中华鲟产卵场冬季20.0℃的水温出现时间推迟1~4旬,监利四大家鱼产卵场春季18.0℃的水温出现时间推迟1~3旬,并随着蓄水位的抬升,推迟幅度逐渐加大。     

钦-杭成矿带东段村前含矿斑岩地球化学特征及其构造环境与成矿意义

村前铜多金属矿床位于钦杭成矿带东段,为一具有矽卡岩型矿化和斑岩型矿化的铜多金属矿床,含矿岩体为燕山早期花岗闪长斑岩,岩石具有富硅、富铝、富碱的特点,属于偏铝-过铝质钙碱性花岗岩类。岩体具有从深部向浅部蚀变增强,大部分组分活动性不明显,而成矿元素Cu-Mo-Fe-Pb-Zn-Au-Ag含量明显增加,Na2O、Sr含量降低,REE元素除Eu少量丢失外,其余均呈一致的迁入特征。岩体属Ⅰ型花岗质岩石,由具角闪石+石榴子石残留相的火成岩部分熔融形成的熔浆,混合或混染了地壳重熔型岩浆上侵就位而成。钦杭结合带东段,燕山期中酸性岩浆活动具有从176~150Ma的埃达克岩或具岛弧花岗岩特征的Ⅰ型花岗岩,至150~140Ma的S型花岗岩,向140~110Ma的A型花岗岩演化趋势,显示了地壳由厚减薄的过程,暗示其大地构造背景为岩石圈的伸展减薄环境,而形成于169.3±1.1Ma的村前斑岩体正处于伸展阶段早期。综合岩体成矿特征表明,钦杭成矿带东段及邻近地区,176~160Ma主要形成与Ⅰ型花岗质岩石有关的以Cu为主的多金属矿床;160~150Ma主要形成与Ⅰ型花岗质岩石有关的Cu-Mo矿床与W-Sn矿床;150~140Ma主要形成与S型花岗质岩石有关的以W-Sn-Mo为主的多金属矿床,以及以Ag-Pb-Zn为主的多金属矿床;140~110Ma主要形成与A型花岗质岩石有关的以W-Sn-Mo为主的多金属矿床,少量与Ⅰ型花岗质岩石有关的Pb-Zn矿床。     

华南大规模低温成矿的主要科学问题

大面积低温成矿是全球独特的重要成矿事件。华南地区扬子地块西南部面积约50万平方千米的广大范围,低温矿床广泛发育,包括卡林型金矿床、MVT型Pb-Zn矿床和脉型锑、汞、砷等矿床,构成华南低温成矿域。该成矿域由川滇黔接壤区的Pb-Zn、右江盆地Au-Sb-As-Hg和湘中盆地Sb-Au等三个矿集区组成。其中的矿床主要赋存于沉积岩中,受断裂构造控制,形成于100~250℃的低温条件下。以往的研究取得了重要进展,但成矿时代、成矿动力学背景、成矿物质基础和成矿过程等关键科学问题一直悬而未决。近年的研究表明,这些矿床可能形成于200~230Ma(印支期)和130~160Ma(燕山期)两个时期,除川滇黔Pb-Zn矿集区由盆地卤水演化成矿外,其余两个矿集区的形成可能均受印支期和燕山期的深部岩浆活动驱动,尽管成矿流体中的水主要是大气成因地下水。本专题报道了近年来这些方面的最新研究进展,包括20篇文章,主要涉及这些低温矿床的地质地球化学特征、成矿时代、矿床成因和成矿动力学背景等。     

北方某经济开发区地下水污染调查评价

本文应用污染指数法,对北方某经济开发区及周边地下水水质进行了污染评价,结果表明研究区地下水水质以轻污染和中污染为主,局部地区出现较重污染,主要指标为硝酸盐氮、三氯甲烷和三氯乙烯。通过对工业废水、再生水、河水水质的检测,发现研究区地表水水质与污水处理厂再生水排放密切相关,地下水污染很可能与开发区企业排污有关。由于开发区所处位置的环境敏感性和脆弱性,建议今后在开发区及附近继续开展相关研究,进一步查明地下水的硝酸盐氮及有机污染物来源、污染途径,建立完善的监测体系,以便及时切断污染源,保障城市及当地供水安全。     

Reconstruction of Holocene paleohydrological and sedimentological characteristics of Umm Ar-Rimam basin (northern Kuwait)

The paleohydrological and sedimentological characteristics of a playa lake in northern Kuwait (Arabian Gulf) are reconstructed using sedimentological, geochemical, and isotopic techniques. The sequence consists of up to 8 cycles of S-poor, alluvial sediments capped by a thin organic soil interbedded with gravity-fall calcrete sediments. The succession is locally derived from mainly Quaternary sediments and is regressive with upsection filling of the subsiding basin by cycles of sheetwash flow in response to climatic change. There is no natural, open-water lake water as indicated by low total organic carbon (TOC) data, but the presence of incised calcrete yardangs suggests that more extensive open-water conditions were operative in the past. Stable isotope (δ¹⁸O‰ and δ¹³C‰) values of the authigenic carbonates indicate the following three distinct processes: evaporation, meteoric fluid infiltration, and rapid per-descensum flow (rapid downward movement of water and playa sediment through pipes) through a porous, clastic sequence. Because evaporites are scarce, other factors besides evaporation action control chemical and isotopic compositions of the per-decensum lake fluids. Consequently, the isotopic composition cannot be interpreted exclusively as an indicator of salinity or evaporation ratio. The degassing of CO₂ during groundwater discharge may explain the enriched carbon isotope values for the authigenic carbonates precipitated in the sediments. Hydrologically closed lake water bodies tend to show low negative carbonate oxygen and carbon isotopic signatures. Isotopically negative δ¹³C values imply a strong input of soil-zone carbon to the groundwater of the top 60 cm of the sediment. Lakes that are hydrologically closed and evaporate or equilibrate with atmospheric CO₂ will tend to have low negative δ¹⁸O and δ¹³C values in the carbonates as reported by Talbot (Chem Geol: Isotope Geosci Sect 80(4):261–279, 1990). Biologically active lakes will tend toward lower δ¹³C of dissolved carbon due to the photosynthetic effects of ¹²C withdrawal as reported by Dunagan and Driese (J Sed Res 69:772–783, 1999). Increased biological activity during sedimentation may account for low carbon isotope values where plants were abundant, but in shrinkage-dominated systems (those of clay-rich soil subjecting to wet-dry conditions), carbon isotopes will be largely inherited from the calcretic limestones in the land extending landward of the coast and not influenced by coastal processes (known as hinterland), such as Umm Ar-Rimam depression. This basin does not fit the classic shallow playa-type basins of the Arabian Peninsula but rather the recharge playas of the southwestern USA.