Unified modeling of flow liquefaction and cyclic mobility

Flow liquefaction and cyclic mobility are two different phenomena that are encountered during strong earthquakes. Flow liquefaction is associated with the contractive behavior of loose granular materials and cyclic mobility is associated with the dilative response of both loose and dense granular materials at low confining stresses. These two types of response pertain to the same material and therefore should be modeled in a consistent manner. Whether a soil in a given state exhibits contractive or dilative behavior is dependent on its dilatancy, d=d_v^p/d_q^p. A form of the dilatancy d=d(η,ψ,C) is proposed, where η=q/p is the stress ratio, and ψ and C denote the internal state variables and the intrinsic properties, respectively. It has been shown that such a state-dependent dilatancy is effective in describing both the contractive and dilative behavior. This allows the soil behavior associated with flow liquefaction and cyclic mobility during earthquakes to be modeled in a unified way.     

Zircon U-Pb geochronology of Early Jurassic-Late cretaceous volcanic rocks in North Yellow Sea BasinEI北大核心CSCD

The X-drilling cores of the North Yellow Sea basin reveal two sets of Mesozoic clastic rocks, which are the dark rocks in lower part and the red rocks in upper part, respectively. There are two layers of volcanic rocks at the bottom and the upper part of the dark rock unit. The volcanic rocks at the bottom part are trachytic dacite while rocks at the upper part are clastic dacite. The zircon grains from the upper and lower units of volcanic rocks are euhedral-subhedral columnar crystals and show oscillatory zoning on cathodoluminescence images. 22 tests of zircons in the trachytic dacite from the bottom part yield an age of 141-151 Ma, with weighted mean 206Pb/238U age of 145±2 Ma. Whereas 18 tests of zircons from the sample at the upper part give 206Pb/238U ages around 139-149 Ma with weighted mean 206Pb/238U age of 141±2 Ma, which implies that the X well volcanic rocks belong to Late Jurassic-Early Cretaceous. Comparing with the age and geochemical characteristics of the Mesozoic igneous rocks in Shandong peninsula, we suggest that the igneous rocks from both the North Yellow Sea basin and Jiaolai basin were formed under same dynamic setting, i.e., the subduction related volcano arc and back-arc extension. ©, 2015, Science Press. All right reserved.     

The Hα-cyclonic spectra of a flare loop system on 1981 April 27

The data such as the H-spectrum-spectroheliographic (SSHG) observations, the H-chromospheric observations, etc., of a flare loop prominence which occurred on the western solar limb on 1981 April 27 have been obtained at Yunnan Observatory. The distribution of the internal motions and the macroscopical motion of the flare loop prominence with time and space in the course of its eruption and ascension is derived from the comprehensive analysis of the data. The possible physical pictures and the instability of the motions of the loop are inferred and discussed.     

Mechanical shaking and soil water affect the growth of Psammochloa villosa in the Mu Us Sandland

The Mu Us Sandland is basically characterized by water shortage and high wind. Thus, wind-induced mechanical perturbation (MP) and soil water availability are likely to interact to affect plant growth. Since high water availability and MP can induce responses that are in the opposite direction, we hypothesized that MP effects on perennial grasses might be mitigated by increased soil water availability in the Mu Us Sandland. We counducted an experiment in which seedlings of Psammochloa villosa were subjected to two levels of MP (non-MP vs. MP 1 min d⁻¹) and two levels of water availability (200 ml d⁻¹vs. 400 ml d⁻¹) and measured three plant traits. MP significantly decreased plant height, total biomass, and root/shoot ratio. There were significant interactions between MP and soil water availability on plant height and root/shoot ratio. These findings imply that MP alone is a stressful factor for P. villosa and MP effects on its growth can be partially mitigated by increased soil water availability, and also suggest that P. villosa may respond to MP in a way that allows plants to survive in the windy semiarid environments.     

Adsorption of anionic dye on magnesium hydroxide-coated pyrolytic bio-char and reuse by microwave irradiation

Magnesium hydroxide-coated pyrolytic bio-char composite was prepared by chemical precipitation, and the adsorption behavior of anionic dye (directly frozen yellow) onto magnesium hydroxide-coated pyrolytic bio-char was investigated in the batch mode. The Fourier transform infrared spectroscopy, X-ray diffraction spectroscopy and X-ray fluorescence spectroscopy of adsorbents were characterized. Adsorption studies were performed at different pH, salt concentration, contacting time and dye concentration. The pH value of the solution influenced the adsorption capacity significantly, and adsorption is favored of pH 6–8. Salt coexisted in solution increased slightly directly frozen yellow adsorption capacity. The isotherm data were analyzed by Langmuir and Freundlich isotherm model, and Langmuir model was better to predict the equilibrium data. Thermodynamic calculations showed that the adsorption was a spontaneous and endothermic process. Exhausted magnesium hydroxide-coated pyrolytic bio-char was treated by microwave irradiation, and yield of regeneration was 98 % in the case of microwave irradiated time 5 min at 320 W. The magnesium hydroxide-coated pyrolytic bio-char can be reused.     

Distribution of cadmium, chromium, copper, lead and zinc in marine sediments in Hong Kong waters

Partitioning of heavy metals (Cd, Cr, Cu, Pb, Zn) in marine sediments collected from various sites in Hong Kong waters were determined using sequential extraction method. Sediments from Kellette Bank, located in Victoria Harbour, had higher metal concentrations especially Cu and Zn than most other sites. Slightly over 20% of total Cu and Cr existed as readily available forms in Peng Chau and Kellette Bank. At most sampling sites, over 15% of the Cu existed as the exchangeable form indicating that Cu could be readily released into the aqueous phase from sediments. A significantly higher percentage of Pb and Zn was associated with the three non-residual fractions. Hence, there is a greater environmental concern for remobilization of Pb and Zn compared with Cr. The high amount of residual Cd (>50%) and the relatively lower Cd content indicate that little environmental concern is warranted for the remobilization of Cd. Distribution of metals in sediments collected from different depth at Kellette Bank shows that metal concentrations decreased with profile depth. The levels of Pb and Zn associated with the two readily available fractions increased sharply in the surface sediment. These metals represented the pollutants, which were introduced into the area in the mid-eighties through early nineties as a result of rapid economic and industrial development in the territory. As significant portions of these metals were bound to the readily available phases in the surface sediments, metal remobilization could be a concern. An erratum to this article can be found at     

Petrological evidence for shock‐induced high‐P metamorphism in a gabbro

Microlites (minute spherulitic, dendritic, skeletal, acicular and poikilitic crystals) diagnostic of crystallization in quenched melt or glass in fault rocks have been used to infer fossil earthquakes. High‐P microlites and crystallites are described here in a variably eclogitized gabbro, the wallrock to the coesite‐bearing eclogite breccia at Yangkou in the Chinese Su‐Lu high‐P metamorphic belt. The studied hand specimens are free of discernible shear deformation, although microfractures are not uncommon under the microscope. In the least eclogitized gabbro, the metagabbro, stellate growths of high‐P minerals on the relict igneous minerals are common. Dendritic garnet crystals (<1?5 μm) grew around rutile and/or phengite replacing ilmenite and biotite, respectively. Skeletal garnet also rims broken flakes of igneous biotite and mechanically twinned augite. Radial intergrowths of omphacite and quartz developed around relict igneous orthopyroxene and are rimmed by skeletal or poikilitic garnet where a Ti‐bearing mineral relict is present. Acicular epidote, kyanite and phengite crystallites are randomly distributed in a matrix of Na‐rich plagioclase, forming the pseudomorphs after igneous plagioclase. In the more eclogitized gabbro, the coronitic eclogite located closer to the eclogite breccia, all the igneous minerals broke down into high‐P assemblages. Thick coronas of poikilitic garnet grew between the pseudomorphs after igneous plagioclase and ferromagnesian minerals. The igneous plagioclase is replaced by omphacite crystallites, with minor amounts of phengite and kyanite. Thermodynamic modelling of the plagioclase pseudomorphs shows an increase in P–T in the wallrock from the metagabbro to the coronitic eclogite, and the P–T variation is unrelated to H₂O content. The fluid‐poor pressure overstepping scenario is unsupported both by phase diagram modelling and by whole‐rock chemical data, which show that the various types of eclogitized gabbro are all fairly dry. A large pressure difference of >2 GPa between the metagabbro and the coesite‐bearing eclogites ~20 m apart cannot be explained by the subduction hypothesis because this would require a depth difference of >60 km. The microlites and crystallites are evidence for dynamic crystallization due to rapid cooling because constitutional supercooling was unlikely for the plagioclase pseudomorphs. The lack of annealing of the broken biotite and augite overgrown by strain free skeletal garnet is consistent with a transient high‐P–T event at a low ambient temperature (<300 °C), probably in the crust. Therefore, the eclogitization of the wallrock to the eclogite breccia was also coseismic, as proposed earlier for the eclogite facies fault rocks. The outcrop‐scale P–T variation and the transient nature of the high‐P–T event are inconsistent with the other existing tectonic models for high‐P metamorphism. The fact that the less refractory but denser biotite is largely preserved while the more refractory but less dense plagioclase broke down completely into high‐P microlite assemblages in the metagabbro indicates a significant rise in pressure rather than temperature. Given that the metamorphic temperatures are far below the melting temperatures of most of the gabbroic minerals under fluid‐absent conditions, stress‐induced amorphization appears to be the more likely mechanism of the coseismic high‐P metamorphism.     

An Experimental Study of Crack Coalescence Behaviour in Rock-Like Materials Containing Multiple Flaws Under Uniaxial Compression

Experiments on man-made flawed rock-like materials are applied extensively to study the mechanical behaviour of rock masses as well as crack initiation modes and crack coalescence types. A large number of experiments on specimens containing two or three pre-existing flaws were previously conducted. In the present work, experiments on rock-like materials (formed from a mixture of sand, plaster, limestone and water at mass ratio of 126:9:9:16) containing multiple flaws subjected to uniaxial compression were conducted to further research the effects of the layout of pre-existing flaws on mechanical properties, crack initiation modes and crack coalescence types. Compared with previous experiments in which only three types of cracks were found, the present experiments on specimens containing multiple flaws under uniaxial compression revealed five types of cracks, including wing cracks, quasi-coplanar secondary cracks, oblique secondary cracks, out-of-plane tensile cracks and out-of-plane shear cracks. Ten types of crack coalescence occurred through linkage among wing cracks, quasi-coplanar secondary cracks, oblique secondary cracks, out-of-plane shear cracks and out-of-plane tensile cracks. Moreover, the effects of the non-overlapping length and flaw angle on the complete stress–strain curves, the stress of crack initiation, the peak strength, the peak strain and the elastic modulus were also investigated in detail.     

Field measurement and scaled-down wind-tunnel model measurement of airflow field over a barchan dune

Airflow is measured over a barchan dune in the field and over a scaled-down model in a wind tunnel. The change of the flow speed over the stoss side is represented by the change of speed-up ratio. According to the field measurement, the wind profiles within 0-3m above the stoss can be divided into two segments. The lower segment, about 0.66 m thick, is the inner-boundary layer, within which the friction velocities derived from the wind profiles increase from the upwind inter-dune region to the upper stoss, and then decrease near the dune top. This change, together with the changes of airflow field, speed-up ratio and sand flux, is related to the morphological change and contributes to the stable shape and height of a barchan dune. In the wind tunnel, airflow varies in a similar way as in the field, with the speed-up ratios constantly higher than 1.0 and increasing along the stoss slope. While the segmentation of wind profiles also occurs in the wind tunnel, friction velocities derived from the wind profiles decrease along the stoss, indicating a very thin inner-boundary layer above the wind tunnel model where the detailed wind-speed change becomes difficult to measure using the present instruments.