广东省海岸表层沉积物的重矿物特征及其与沉积环境的关系

广东省海岸表层沉积物中的重矿物近40种。含量较高的有钛铁矿、赤矿铁、磁铁矿、话石、电气石、黑云母和普通角闪石等。自生矿物主要为硬石膏、自然铜、黄铁矿及菱铁矿。这些矿物来自附近的母岩。根据物源性质不同,可将不同岸段重矿物区分为陆源矿物组合、近源-自生矿物组合和近源矿物组合三种:除物源控制外,重矿物含量、种类、形态特征及其在平面上的分布主要受沉积环境影响。据此,可将重矿物分布类型划分为河口型、海湾型和海岛型三类,且与上述不同矿物组合性质相对应。     

对GPS接收机测试评估的探讨

随着GPS的广泛应用和GPS产业的迅速发展，GPS厂家众多，生产的接收机类型更是数以百计，整个GPS接收机市场可以说是鱼目混珠，识别困难；大多数购买者只能听信厂家的技术指标，如何对GPS接收机的性能进行测试评估的意义显得很重要，本文基于此对GPS接收机测试评估展开探讨和研究。     

滆湖磷迁移过程的研究(一)——磷迁移模型的建立

通过滆湖磷的来源途径(入湖河道、湖区径流、湖面沉降、养殖技饵、底泥释放)和湖体各要素(水体、浮游植物、大型水生植物、鱼类等)中磷迁移过程调查资料的分析,建立了描述磷在上述各要素中迁移过程的数学模型.经实测资料验证,模型的计算值与实测值的平均相对误差在9.9%-18.6%.基本反映了磷的迁移过程及动态变化规律,对该湖磷浓度预测及磷资源合理利用具有重要的意义.     

Seismic fracture evaluation of diaphragm joints in welded beam-to-box column moment connections

Steel box columns are widely used in steel building structures in Taiwan due to their dual strong axes. To transfer the beam-end moment to the column, diaphragm plates of the same thickness and elevations as the beam flanges are usually welded inside the box column. The electro-slag welding (ESW) process is widely used to connect the diaphragms to the column flanges in Taiwan because of its convenience and efficiency. However, ESW may increase the hardness of the welds and heat-affected zones (HAZs), while reducing the Charpy-V notch strength in the HAZ. This situation can cause premature fracture of the diaphragm-to-column flange welds before a large plastic rotation is developed in the beam-to-box column joints. To quantify the critical eccentricity and the effectiveness of fracture prediction, this study uses fracture prediction models and finite element model (FEM) analysis to correlate the test results. In this study, two beam-to-box column connection subassembly tests are conducted with different loading protocols and ESW chamber shapes. To implement a fracture prediction model, the material parameters are established from circumferential notched tensile tests and FEM analysis. Test results indicate that the fracture instances can be predicted on the basis of the cumulative plastic deformation in the HAZs. Analytical results indicate that fracture instances and locations are sensitive to the relative locations of the ESW joints and beam flange. Tests also confirm that the possible fracture of the diaphragm-to-column flange joints can be mitigated by enlarging the chamber of the ESW joint.     

Simulation of spatially correlated earthquake ground motions for engineering purposes

A new model to simulate spatially correlated earthquake ground motions is developed. In the model, the main factors that characterize three distinct effects of spatial variability, namely, the incoherency effect, the wave-passage effect and the site-response effect, are taken into account, and corresponding terms/parameters are incorporated into the well known model of uniform ground motions. Some of these terms/parameters can be determined by the root operation, and others can be calculated directly. The proposed model is fi rst verif ied theoretically, and examples of ground motion simulations are provided as a further illustration. It is proven that the ensemble expected value and the ensemble auto-/cross-spectral density functions of the simulated ground motions are identical to the target spectral density functions. The proposed model can also be used to simulate other correlated stochastic processes, such as wave and wind loads.     

地形对于气流运动影响的数值研究

建立了二维、非静力平衡的数值模式，研究地形对上游气流的阻挡以及大振幅背风波谷与下坡风的形成。结果表明：地形的阻挡效应受地形高度、大气层结及地形非对称性等因子的影响。数值试验与理论分析都证明地形越高、层结越稳定时阻挡作用越强；同样条件下，迎风坡坡度大的地形容易对气流形成阻挡。此外，分析了地形高度、大气层结、地形非对称性以及基本入流大小对背风波谷及下坡风强度影响的规律，并通过一次实际观测对数值模拟结果进行了检验。     

Inverse analysis of deformation mechanism by geodetic surveys−a case study

In 1988 two large earthquakes with magnitude of Ms 7.6 and Ms 7.2 occurred in Lancang-Genma area, Southwest China. This paper discusses the determination of the spatial distribution of fault slip caused by the earthquakes using geodetic surveys. The prior information obtained from geological surveys and seismological investigations was used to determine the geometry of the fault plane and the average fault slip. The smooth constraints on the fault slips have been described by a normal distribution with hyperparameters, which are incorporated in the inversion analysis with a Bayesian model. Akaike’s Bayesian Information Criterion (ABIC) is used to get the optimal values of hyperparameters. Once the hyperparameters are determined, the maximum likelihood method is employed to estimate the patterns of a fault slip. Based on the results of inverse analysis monitoring geodetic surveys can be properly designed and conducted to obtain crust deformations and predict potential earthquake sources.     

硅灰石、透辉石在陶瓷中的基本反应和作用

本文以硅灰石和高岭石、透辉石和高岭石为端元组分,推导了二元假相图。根据这两个假相图,提出了四个基本固相反应。用这些基本反应以及硅灰石、透辉石的矿物学性质,说明了它们对陶瓷坯体工艺性能的作用。     

广东麒麟绿钙闪石巨晶的地球化学特征

本文对罕见的幔源绿钙闪石巨晶进行了综合的地球化学分析，主要元素，稀土微量元素和Ｓｒ，Ｎｄ同位素的特征表明；绿钙闪石巨晶是碱性玄武岩浆在地幔条件下的结晶产物；相对于寄主玄武岩，绿钙闪石巨晶均属捕虏晶，它们与共存的橄榄岩包体无成因联系，其形成可能与共存的黑色包体有关。