Salt diapirs without well defined boundaries – a feasibility study of semi‐automatic detection

Prestack depth imaging of seismic data in complex areas such as salt structures requires extensive velocity model updating. In many cases, salt boundaries can be difficult to identify due to lack of seismic reflectivity. Traditional amplitude based segmentation methods do not properly tackle this problem, resulting in extensive manual editing. This paper presents a selection of seismic attributes that can reveal texture differences between the salt diapirs and the surrounding geology as opposed to amplitude‐sensitive attributes that are used in case of well defined boundaries. The approach consists of first extracting selected texture attributes, then using these attributes to train a classifier to estimate the probability that each pixel in the data set belongs to one of the following classes: near‐horizontal layering, highly‐dipping areas and the inside of the salt that appears more like a low amplitude area with small variations in texture. To find the border between the inside of the salt and the highly‐dipping surroundings, the posterior probability of the class salt is input to a graph‐cut algorithm that produces a smooth, continuous border. An in‐line seismic section and a timeslice from a 3D North Sea data set were employed to test the proposed approach. Comparisons between the automatically segmented salt contours and the corresponding contours as provided by an experienced interpreter showed a high degree of similarity.     

Effects of turbulence on the transport of individual particles as bedload in a gravel‐bed river

This study investigates the association between mean and turbulent flow variables and the movement of individual particles in a gravel‐bed river. The experimental design implemented in the Eaton‐North River (Québec, Canada) is based on the simultaneous observations at a high temporal resolution of both particle movements as bedload using an underwater video camera and of the streamwise and vertical flow velocity components using a vertical array of three electromagnetic current meters (ECMs). The frequency and distance of displacement of particles larger than 20 mm that were sliding or rolling on the bed were measured from a 10 minutes long film. Mean and turbulent flow properties obtained for periods without sediment transport are compared to those when particles were sliding and rolling. When particles are sliding, weak differences are present for the mean streamwise velocity and normal vertical stresses. Instantaneous Reynolds shear stresses are significantly lower for sliding events which was not expected but could be explained by the important dominance of Quadrant 3 events (inward interactions). When particles are rolling, only the vertical normal stresses show a weak difference from those observed in the absence of transport but they tend to occur when Quadrant 2 (ejections) dominate the flow field. For both sliding and rolling particles, vertical and/or streamwise fluid accelerations show high magnitude values when compared to periods without transport. For sliding particles, streamwise acceleration is mostly negative and combines most of the time with a positive vertical acceleration. For rolling particles, streamwise and vertical acceleration are predominantly of opposite sign. These results suggest that fluid acceleration or deceleration in the streamwise and vertical directions is affecting the pressure field around particles. In this study, fluid acceleration seems to play a more important role than Reynolds shear stress or normal stresses for bedload movements. Copyright © 2010 John Wiley & Sons, Ltd.     

Theory and experimental study for sliding isolators with variable curvature

Because a conventional isolation system with constant isolation frequency is usually a long‐period dynamic system, its seismic response is likely to be amplified in earthquakes with strong long‐period wave components, such as near‐fault ground motions. Seismic isolators with variable mechanical properties may provide a promising solution to alleviate this problem. To this end, in this work sliding isolators with variable curvature (SIVC) were studied experimentally. An SIVC isolator is similar to a friction pendulum system (FPS) isolator, except that its sliding surface has variable curvature rather being spherical. As a result, the SIVC's isolation stiffness that is proportional to the curvature becomes a function of the isolator displacement. By appropriately designing the geometry of the sliding surface, the SIVC is able to possess favorable hysteretic behavior. In order to prove the applicability of the SIVC concept, several prototype SIVC isolators, whose sliding surfaces are defined by a sixth‐order polynomial function, were fabricated and tested in this study. A cyclic element test on the prototype SIVC isolators and a shaking table test on an SIVC isolated steel frame were all conducted. The results of both tests have verified that the prototype SIVC isolators do indeed have the hysteretic property of variable stiffness as prescribed by the derived formulas in this study. Moreover, it is also demonstrated that the proposed SIVC is able to effectively reduce the isolator drift in a near‐fault earthquake with strong long‐period components, as compared with that of an FPS system with the same friction coefficient. Copyright © 2011 John Wiley & Sons, Ltd.     

Modeling a major source of economic resilience to disasters: recapturing lost production

Terrorist attacks and natural disasters have potentially severe economic consequences in terms of property damage and business interruption. However, experience from the September 11 World Trade Center attack and other disasters indicates that the economy has a great deal of resilience. This refers to the ability to dampen the maximum potential economic output (business interruption) loss. One of the most prominent sources of resilience is the ability of businesses to reschedule, or recapture, lost production after the event. Although there have been applications of a fixed parameter recapture factor for each of several aggregated sectors of the economy, there has been little formal analysis of this resilience action. This study offers a theoretic framework for analyzing production rescheduling. It distinguishes the major conditions influencing two aspects that have previously been neglected: (1) the maximum time span over which the rescheduling can take place and (2) the likely decline of the maximum recapture as the business interruption increases. We divide the relevant time path into two periods after recovery. One is a function of a recaptured output path after recovery to the status of normal production. The other is a function for the maximum recaptured production, based on the recaptured output path. The recaptured output path function is assumed to follow a normal distribution function, and hence, total recaptured output follows the cumulative normal distribution function over time after productive capacity is restored. Also, we develop a new cumulative normal distribution function for interruption time duration, which is symmetric with respect to the output axis. This recapture function has unknown parameters. Empirical data on the recaptured amounts following an actual disaster can be used to estimate the parameters of this function using simulation methods.     

Laboratory tests of vortex-induced vibrations of a long flexible riser pipe subjected to uniform flow

Laboratory tests have been conducted on vortex-induced vibration (VIV) of a long flexible riser towed horizontally in a wave basin. The riser model has an external diameter of 16 mm and a total length of 28.0 m giving an aspect ratio of about 1750. Reynolds numbers ranged from about 3000 to 10,000. Fiber optic grating strain gages are adopted to measure the dynamic response in both cross-flow and in-line directions. The cross-flow vibrations were observed to vibrate at modes up to 6 and the in-line reached up to 12. The fundamental response frequencies can be predicted by a Strouhal number of about 0.18. Multi-mode responses and the asymmetry of the bare pipe response in uniform flow were observed and analyzed. The experimental results confirmed that the riser pipe vibrated multi-modally despite it being subject to a uniform current profile and all of the excited modes vibrated at the Strouhal frequency. The asymmetrical distribution of displacement mainly resulted from the modal composition. Higher harmonics of the VIV response such as the third, fourth and fifth harmonics frequencies were found to be steady over the entire duration of the test even if they varied along the length of the riser pipe.     

Modeling and control of a 75 kW class variable liquid-column oscillator for highly efficient wave energy converter

The modeling and control of a variable liquid-column oscillator having a liquid filled U-tube with air chambers at its vertical columns are presented. As an ocean wave energy extracting device, the structure of the variable liquid-column oscillator (VLCO) is analogous to that of the tuned liquid-column damper used to suppress oscillatory motion in large structures like tall buildings and cargo ships. However, owing to an air spring effect caused by the dynamic pressure of air chambers, the amplitude of response of the VLCO becomes significantly amplified for a desired wave period. The governing equations for the motion of VLCO structure under wave excitation and the motion of liquid with an air spring effect caused by an air–liquid interaction are described by a series of nonlinear differential equations. A set of control parameters for extracting maximum power from various wave conditions is determined for the efficient operation of the VLCO. It is found that the effect of the air spring has an important role to play in making the oscillation of the VLCO match with the ocean wave. In this way, the VLCO provides the most effective mode for extracting energy from the ocean wave.     

Dynamic factor analysis considering elastic boom effects in heavy lifting operations

The dynamic factor is the ratio of the maximum dynamic load to the static load acting on the wire ropes between the boom of a floating crane and a cargo. In this paper, the dynamic factor is analyzed based on dynamic simulations of a floating crane and a cargo, considering an elastic boom. For the simulation, we designed a multibody system that consists of a floating crane barge, an elastic boom, and a cargo connected to the boom through wire ropes. The dynamic equations of motion of the system are based on flexible multibody system dynamics. Six-degree-of-freedom motions are considered for the floating crane and for the cargo, and three-dimensional deformations for the elastic boom. The hydrostatic force, the hydrodynamic force, the gravitational force, and the wire rope forces are considered as external forces. The dynamic factor is obtained by numerically solving the equation. The effects of the elastic boom on heavy cargo lifting are discussed by comparing the simulation results of an elastic boom and a rigid boom.     

Geochronology of the Xihuashan Tungsten Deposit in Southeastern China: Constraints from Re–Os and U–Pb Dating

Xihuashan tungsten deposit is one of the earliest explored tungsten deposits in southeastern China. It is a vein type deposit genetically associated with the Xihuashan granite pluton. Here we report new dating and zircon geochemistry results. Re–Os isotopic dating for molybdenite intergrowth with wolframite in the oldest generation of the Xihuashan pluton yielded an isochron age of 157.0 ± 2.5 Ma (2σ). Zircon U–Pb laser ablation inductively coupled plasma mass spectrometry (LA‐ICP‐MS) dating shows that the pluton crystallized at 155.7 ± 2.2 Ma (2σ). This age is similar to the molybdenite Re–Os age for the ore deposit within error. This, together with published data, suggests that the major W(Mo)‐Sn mineralization occurred between 160–150 Ma in southeastern China. These deposits constitute a major part of the magmatic‐metallogenic belt of eastern Nanlin. The lower Re content in molybdenite of the Xihuashan tungsten deposit shows crustal origin for the ore‐forming material. The limited direct contributions from the subducting slab for the tungsten mineralization in the Nanling region suggest a change of the style of the paleo‐Pacific plate beneath southeastern China.     

Environmentally associated spatial changes of a macrozoobenthic community in the Saemangeum tidal flat,Korea

Estuarine tidal flats are both ecologically and economically important, hence developing methods to reliably measure ecosystem health is essential. Because benthic fauna play a central role in the food web of tidal flats, in this study we set out to quantitatively describe the intertidal zonation of macro-invertebrates and their associations with specific environmental parameters along three transects in the Saemangeum tidal flat, Korea. The abundance and biomass of intertidal fauna with respect to five environmental parameters (i.e., shore level, mud content, coarse sand content, water content, and organic content) were measured, to identify environmental factors that influence macrofaunal distribution in intertidal soft bottom habitats. A total of 75 species were identified, with dominant species showing distinct zones of distribution along all transects. The number of species recorded in each transect was found to be dependent on sediment characteristics and salinity. Cluster analysis classified the entire study area into three faunal assemblages (i.e., location groups), which were delineated by characteristic species, including (A) ‘Periserrula–Macrophthalmus’, (B) ‘Umbonium–Meretrix’, and (C) ‘Prionospio–Potamocorbula’. Four environmental variables (i.e., shore level, water content, mud content, and organic content) appeared to determine factors that distinguished the three faunal assemblages, based on the discriminant analysis. The faunal assemblage types of the sampled locations were accurately predicted from environmental variables in two discriminant functions, with a prediction accuracy of 98%. It should be noted that the zonation of benthos in the lower section (C) of Sandong had been affected by the construction of a nearby dike, while this parameter had remained essentially unchanged at the other two location groups (A–B). Overall, the zonation of benthos from the Saemangeum tidal flat was explained adequately by the measured environmental variables, implying that faunal assemblages are closely associated with certain combinations of abiotic factors. The identification of such reliable associations may facilitate the development of statistical models to predict faunal distributions based on environmental variables at both local and regional scales. The entire study area was embanked in 2006 (one year after this study), and an integrated plan was set into force to develop claimed land into industrial, residential and agricultural districts, which also included a partial restoration program of the tidal flats located near to the study area.