Clay smear processes in mechanically layered sequences — Results of water-saturated model experiments with free top surface

The aim of this study is to improve our knowledge of the processes that lead to clay smear during faulting of a layered sand-clay sequence in an analogue sandbox model. We carefully characterized mechanical properties of the materials used by a series of geotechnical tests. Displacement field was quantified using PIV (Particle Image Velocimetry). The model is water-saturated to allow the deformation of wet clay and sand in one experiment comprising a sand package with a horizontal layer of clay above a predefined rigid basement fault. The thickness and rigidity of the clay layer are the parameters varied in this study. The model shows a range of structures that are related to competence contrast between sand and different clay types. Results show ductile shearing of soft clay with a transition to brittle fracturing of stiff clay accompanied by the formation of rotating clay blocks in the fault zone. Localized deformation is observed through time showing (i) the propagation of one active fault migrating laterally through the sediment package, and (ii) the formation of a stable prism between two or more active faults that gets progressively smaller with minor rotation of the hanging wall fault. Continuous clay smear is observed resulting from the lateral injection of clay as well as from a reworked mixture of sand and clay.     

Radiocarbon dates of late quaternary mammals in the Archangelsk Region and their contribution to reconstructions of the last glaciation in Eastern Europe

Twelve new AMS (Accelerator Mass Spectrometry) dates of large Quaternary mammal remains were reported: mammoth (Mammuthus primigenius, bison (Bison priscus), and musk ox (Ovibos pallantis) found in the Archangelsk Region. The absolute age of the identified samples varies from 46 000 to 22 000 calibrated years ago. These data suggest that a substantial part of the Archangelsk Region was not covered by ice during the indicated time interval.     

Multi-sensor data fusion for the detection of underground coal fires

The spontaneous combustion of coal causes widespread underground coal fires in several countries, amongst which is China. These coal fires cause serious environmental, economic and safety problems. In northern China, the coal fires occur within a wide region stretching 5000 km east-west and 750 km north-south. Remote sensing therefore provides an ideal tool for monitoring this environmental hazard over such a large and remote area. As part of a research project to detect, measure, monitor and extinguish these coal fires, this paper describes a remote-sensing-based multi-sensor data-fusion methodology for detecting the underground fires. The methodology is based on fusing a variety of satellite-based image types (optical, thermal, microwave) together with airborne data (optical and thermal infrared) and ancillary data sources such as geological and topographic maps. The results of the remote-sensing data fusion are presented, using pixel-based, feature-based and decision-based fusion approaches.     

Hydrogeological investigation of shallow aquifers in an arid data-scarce coastal region (El Daba’a,northwestern Egypt)

Hydrogeological investigations in arid regions are particularly important to support sustainable development. The study area, El Daba’a in northwestern Egypt, faces scarce water resources as a result of reported climate change that particularly affects the southern Mediterranean coast and increases stress on the local groundwater reserves. This change in climate affects the area in terms of drought, over-pumping and unregulated exploration of groundwater for irrigation purposes. The hydrogeological investigation is based on a multidisciplinary data-layer analysis that includes geomorphology, geology, slope, drainage lines, soil type, structural lineaments, subsurface data, stable isotopes, and chemical analyses. The study area contains Pleistocene and middle Miocene marine limestone aquifers. Based on lithology and microfacies analysis, the middle Miocene aquifer is subdivided into two water-bearing zones. The area is affected by sets of faults and anticline folds, and these structures are associated with fractures and joints that increase permeability and facilitate the recharge of groundwater. Stable isotope data indicate that groundwater of both the Pleistocene and middle Miocene aquifers is recharged by modern precipitation. The high salinity values observed in some groundwater wells that tap both aquifers could be attributed to leaching and dissolution processes of marine salts from the aquifers’ marine limestone matrix. In addition, human activities can also contribute to an increase in groundwater salinity. A future water exploration strategy, based on the results from the multidisciplinary data-layer analysis, is proposed for the area. The derived scientific approach is transferable to other arid coastal areas with comparable conditions.     

Experimental and computational study of trace element distribution between orthopyroxene and anhydrous silicate melt: substitution mechanisms and the effect of iron

Although orthopyroxene (Opx) is present during a wide range of magmatic differentiation processes in the terrestrial and lunar mantle, its effect on melt trace element contents is not well quantified. We present results of a combined experimental and computational study of trace element partitioning between Opx and anhydrous silicate melts. Experiments were performed in air at atmospheric pressure and temperatures ranging from 1,326 to 1,420°C in the system CaO–MgO–Al₂O₃–SiO₂ and subsystem CaO–MgO–SiO₂. We provide experimental partition coefficients for a wide range of trace elements (large ion lithophile: Li, Be, B, K, Rb, Sr, Cs, Ba, Th, U; rare earth elements, REE: La, Ce, Nd, Sm, Y, Yb, Lu; high field strength: Zr, Nb, Hf, Ta, Ti; transition metals: Sc, V, Cr, Co) for use in petrogenetic modelling. REE partition coefficients increase from $ D_{\text{La}}^{{\text{Opx}} {\hbox{-}} {\text{melt}}} \sim 0.0005 Although orthopyroxene (Opx) is present during a wide range of magmatic differentiation processes in the terrestrial and lunar mantle, its effect on melt trace element contents is not well quantified. We present results of a combined experimental and computational study of trace element partitioning between Opx and anhydrous silicate melts. Experiments were performed in air at atmospheric pressure and temperatures ranging from 1,326 to 1,420°C in the system CaO–MgO–Al₂O₃–SiO₂ and subsystem CaO–MgO–SiO₂. We provide experimental partition coefficients for a wide range of trace elements (large ion lithophile: Li, Be, B, K, Rb, Sr, Cs, Ba, Th, U; rare earth elements, REE: La, Ce, Nd, Sm, Y, Yb, Lu; high field strength: Zr, Nb, Hf, Ta, Ti; transition metals: Sc, V, Cr, Co) for use in petrogenetic modelling. REE partition coefficients increase from $ D_{\text{La}}^{{\text{Opx}} {\hbox{-}} {\text{melt}}} \sim 0.0005 $ D_{\text{La}}^{{\text{Opx}} {\hbox{-}} {\text{melt}}} \sim 0.0005 to $ D_{\text{Lu}}^{{{\text{Opx}} {\hbox{-}} {\text{melt}}}} \sim 0.109 $ D_{\text{Lu}}^{{{\text{Opx}} {\hbox{-}} {\text{melt}}}} \sim 0.109 , D values for highly charged elements vary from $ D_{\text{Th}}^{{{\text{Opx}} {\hbox{-}} {\text{melt}}}} \sim 0.0026 $ D_{\text{Th}}^{{{\text{Opx}} {\hbox{-}} {\text{melt}}}} \sim 0.0026 through $ D_{\text{Nb}}^{{{\text{Opx}} {\hbox{-}} {\text{melt}}}} \sim 0.0033 $ D_{\text{Nb}}^{{{\text{Opx}} {\hbox{-}} {\text{melt}}}} \sim 0.0033 and $ D_{\text{U}}^{{{\text{Opx}} {\hbox{-}} {\text{melt}}}} \sim 0.0066 $ D_{\text{U}}^{{{\text{Opx}} {\hbox{-}} {\text{melt}}}} \sim 0.0066 to $ D_{\text{Ti}}^{{\text{Opx}} {\hbox{-}} {\text{melt}}} \sim 0.058 $ D_{\text{Ti}}^{{\text{Opx}} {\hbox{-}} {\text{melt}}} \sim 0.058 , and are all virtually independent of temperature. Cr and Co are the only compatible trace elements at the studied conditions. To elucidate charge-balancing mechanisms for incorporation of REE into Opx and to assess the possible influence of Fe on Opx-melt partitioning, we compare our experimental results with computer simulations. In these simulations, we examine major and minor trace element incorporation into the end-members enstatite (Mg₂Si₂O₆) and ferrosilite (Fe₂Si₂O₆). Calculated solution energies show that R²⁺ cations are more soluble in Opx than R³⁺ cations of similar size, consistent with experimental partitioning data. In addition, simulations show charge balancing of R³⁺ cations by coupled substitution with Li⁺ on the M1 site that is energetically favoured over coupled substitution involving Al–Si exchange on the tetrahedrally coordinated site. We derived best-fit values for ideal ionic radii r ₀, maximum partition coefficients D ₀, and apparent Young’s moduli E for substitutions onto the Opx M1 and M2 sites. Experimental r ₀ values for R³⁺ substitutions are 0.66–0.67 ? for M1 and 0.82–0.87 ? for M2. Simulations for enstatite result in r ₀ = 0.71–0.73 ? for M1 and ~0.79–0.87 ? for M2. Ferrosilite r ₀ values are systematically larger by ~0.05 ? for both M1 and M2. The latter is opposite to experimental literature data, which appear to show a slight decrease in $ r_{0}^{{{\text{M}}2}} $ r_{0}^{{{\text{M}}2}} in the presence of Fe. Additional systematic studies in Fe-bearing systems are required to resolve this inconsistency and to develop predictive Opx-melt partitioning models for use in terrestrial and lunar magmatic differentiation models.     

Ultrahigh-pressure metamorphic rocks from the Chinese Continental Scientific Drilling Project: II Oxygen isotope and fluid inclusion distributions through vertical sections

In order to reconstruct the formation and exhumation mechanisms of UHP metamorphic terrains, the Chinese Continental Scientific Drilling Program (CCSD) has been carried out in Donghai of the Dabie-Sulu ultrahigh-pressure (UHP) metamorphic belt, East China. Eclogite, gneiss, amphibolite (retrograded from eclogite), ultramafic rocks, and minor schist and quartzite have been drilled. Aiming to reveal the fluid behaviour in a vertical sequence of an UHP slab, we investigated fluid inclusion and oxygen isotope characteristics of selected drillcores from the main hole and the pilot-holes PP2 and ZK 703 of the CCSD. More than 540 laser-ablation oxygen isotope analyses on garnet, omphacite, quartz, kyanite, amphibole, phengite, rutile, epidote, amphibole, plagioclase, and biotite from various rocks in the depth range of 0–3,000 m (mainly eclogite and gneiss) show that the investigated rocks can be divided into two groups: ¹⁸O-depleted rocks (as low as δ¹⁸O = −7.4‰ for garnet) indicate interaction with cold climate meteoric waters, whereas ¹⁸O-normal rocks (with bulk δ¹⁸O > +5.6‰) have preserved the O-isotopic compositions of their protoliths. Meteoric water/rock interaction has reached depths of at least 2,700 m. Oxygen isotope equilibrium has generally been achieved. Isotopic compositions of mineral phases are homogeneous on a mm to cm scale regardless of lithology, but heterogeneous on the scale of a few metres. Oxygen isotope distributions in the vertical sections favour an “in situ” origin of the UHP metamorphic rocks. The very negative δ¹⁸O eclogites usually have higher hydroxyl-mineral contents than the normal δ¹⁸O rocks, indicating higher water content during UHP metamorphism. Fluid inclusion data suggest that rocks with depleted ¹⁸O compositions have had different fluid histories compared to those with normal δ¹⁸O values. Rocks with depleted ¹⁸O mainly have primary medium-to-high salinity inclusions in omphacite, kyanite and quartz, and abundant secondary low-salinity or pure water inclusions in quartz, indicating a high-salinity-brine-dominated fluid system during peak UHP metamorphism; no carbonic inclusions have been identified in these rocks. By contrast, primary very high-density CO₂ inclusions are commonly found in the rocks with normal δ¹⁸O values. These observations suggest that fluid and oxygen isotope composition of minerals are related and reflect variable degrees of alterations of the Dabie-Sulu UHP metamorphic rocks.     

Homo floresiensis and the late Pleistocene environments of eastern Indonesia: defining the nature of the relationship

Evidence from Liang Bua, a limestone cave on the island of Flores in East Indonesia, provides a unique opportunity to explore the long term relationship between hominins and their environment. Occupation deposits at the site span ～95 ka and contain abundant stone artefacts, well preserved faunal remains and evidence for an endemic species of hominin: Homo floresiensis. Work at the site included detailed geomorphological and environmental analysis, which has enabled comparisons to be drawn between changes in the occupational intensity in the cave, using stone tool and faunal counts, and changes in the environmental conditions, using the characteristics of the sedimentary layers in the cave and speleothem records. These comparisons demonstrate that H. floresiensis endured rapidly fluctuating environmental conditions over the last ～100 ka, which influenced the geomorphological processes in the cave and their occupational conditions. The intensity of occupation in the cave changed significantly between 95 and 17 ka, with peaks in occupation occurring at 100–95, 74–61 and 18–17 ka. These correlate with episodes of channel formation and erosion in the cave, which in turn correspond with high rainfall, thick soils and high bio-productivity outside. In contrast, periods of low occupational intensity correlate with reduced channel activity and pooling associated with drier periods from 94 to 75 and 36 to 19 ka. This apparent link between intensity of hominin use of the cave and the general conditions outside relates to the expansion and contraction of the rainforest and the ability of H. floresiensis to adapt to habitat changes. This interpretation implies that these diminutive hominins were able to survive abrupt and prolonged environmental changes by changing their favoured occupation sites. These data provide the basis for a model of human–environment interactions on the island of Flores. With the addition of extra data from other sites on Flores, this model will provide a greater understanding of H. floresiensis as a unique human species.