滇黔北威信凹陷晚二叠世沉积环境与层序地层格架下的聚煤规律浅析

针对滇黔北威信凹陷晚二叠世含煤岩系的“海相-海陆过渡相-陆相”三相变化地带,利用地层剖面上的沉积构造、岩石组合、古生物特征等沉积相判别标志分析研究区的沉积环境及其空间演化,并总结煤质变化规律。在此基础上,通过识别层序与体系域关键界面,建立研究区晚二叠世含煤岩系的层序地层格架,充分讨论研究区厚煤层在层序地层格架下的聚煤规律。研究区自西向东依次为河流冲积平原体系、三角洲-潮坪体系及碳酸盐岩台地体系,成煤环境主要为河流冲积平原中的泛滥盆地河漫沼泽和三角洲-潮坪沉积体系中的上三角洲平原;厚煤层在层序地层中的位置与古地理背景有关,研究区C15,C19煤层形成于最大海泛面附近,C25煤层形成于初始海泛面附近;根据煤质变化规律和煤厚变化特征,在研究区西部的彝良-盐津一带有寻找优质煤炭资源的潜力。     

Analysis of Main Controlling Factors of Overburden Failure in Coal Mining Under Thick Coal Seam Geological Conditions

According to the theory of elastic mechanics half plane, the mechanical model of roof overburden failure is established. Based on the numerical simulation software FLAC^3D, the failure process of roof overburden in 1308 working face is numerically simulated according to the orthogonal experimental design scheme. Matrix analysis and variance analysis are used to analyze and calculate the simulation results to determine the sensitivity of the main control factors to the failure height of overlying rock of mining roof. The results show that: (1) with the increase of mining depth and the advancing distance of working face, the subsidence of roof overburden increases. (2) The order of influence of main controlling factors on roof overburden failure height is: mining depth > working face length > internal friction angle > mining thickness > coal seam dip angle > cohesion > tensile strength. (3) Variance analysis showed that the mining depth height was significant, the working face length and internal friction angle were significant, and the significance of working face length was slightly greater than that of internal friction angle, and other factors were not significant.

     

Quaternary geomorphological evolution of the Kunlun Pass area and uplift of the Qinghai-Xizang (Tibet) Plateau

There is a set of Late Cenozoic sediments in the Kunlun Pass area, Tibetan Plateau, China. Paleomagnetic, ESR and TL dating suggest that they date from the Late Pliocene to the Early Pleistocene. Analyses of stratigraphy, sedimentary characteristic, and evolution of the fauna and flora indicate that, from the Pliocene to the early Quaternary (about 5–1.1 Ma BP), there was a relatively warm and humid environment, and a paleolake occurred around the Kunlun Pass. The elevation of the Kunlun Pass area was no more than 1500 m, and only one low topographic divide existed between the Qaidam Basin and the Kunlun Pass Basin. The geomorphic pattern in the Kunlun Pass area was influenced by the Kunlun–Yellow River Tectonic Movement 1.1–0.6 Ma BP. The Wangkun Glaciation (0.7–0.5 Ma) is the maximum Quaternary glaciation in the Pass and in other areas of the Plateau. During the glaciation, the area of the glaciers was 3–5 times larger than that of the present glacier in the Pass area. There was no Xidatan Valley that time. The extreme geomorphic changes in the Kunlun Pass area reflect an abrupt uplift of the Tibet Plateau during the Early and Middle Pleistocene. This uplift of the Plateau has significance on both the Plateau itself and the surrounding area.     

Time-averaged sub-layer concentration profiles in oscillatory sheet flows

Although thin on the order of several to tens of millimeters, sheet flows normally comprise a lower pick-up sub-layer and an upper contact-load sub-layer, separated at the bed level (z = 0). The time-averaged concentration profile in the pick-up sub-layer shows a ‘convex upward’ curvature, but ‘concave upward’ shape characterizes the time-averaged concentration profile in the contact-load sub-layer. The time-dependent concentration in the contact-load sub-layer is approximately in-phase with the free stream flow velocity, whereas it is nearly in anti-phase with the free stream flow velocity in the pick-up sub-layer. Two distinct analytical expressions of the time-averaged concentration profiles for the respective sub-layers are proposed. The expressions are validated with detailed observation datasets collected in the Groβer Wellenkanal (GWK) prototype wave flume in Hannover, Germany. The agreement between the predicted and the measured values is excellent. Interparticle collisions in the pick-up sub-layer and convective lifting processes associated with vortex shedding in the contact-load sub-layer are considered responsible for the opposite curvatures and in-phase/anti-phase concentration variations. Both transitional boundary and reference concentration are also elaborated.     

陕西省夏季降水量的长期变化趋势

对榆林、西安、汉中夏季降水量的历年变化进行分析，并用灰色拓扑方法作了趋势预测。分析表明，关中的初夏旱和伏旱突出，半湿润地区的西安夏季多年平均降水量比半干旱地区的榆林还少。自１９５１年以来，陕西省夏季降水量的总趋势是：关中、陕南有下降趋势，而陕北下降趋势不明显。另外，关中、陕南的夏季降水还存在连续几年多雨或连续几年少雨的时段，而陕北则呈现出少雨年和多雨年交替出现的高频振荡。     

S,Pb, C and O isotopic compositions and ore genesis of the strata-bound polymetallic sulfide deposits in central Inner Mongolia,China

The strata-bound Cu−Pb−Zn polymetallic sulfide deposits occur in metamorphic rocks of greenschist phase of the middle-upper Proterozoic Langshan Group in central Inner Mongolia. δ³⁴S values for sulfides range from −3.1‰ to +37.3‰, and an apparent difference is noticed between vein sulfides and those in bedded rocks. For example, δ³⁴S values for bedded pyrite range from +10.6‰ to +20.0‰, while those for vein pyrite vary from −3.1‰ to +14.1‰. δ³⁴S of bedded pyrrhotite is in the range +7.9‰–+23.5‰ in comparison with +6.5‰–+17.1‰ for vein pyrrhotite. The wide scatter of δ³⁴S and the enrichment of heavier sulfur indicate that sulfur may have been derived from H₂S as a result of bacterial reduction of sulfates in the sea water. Sulfur isotopic composition also differs from deposit to deposit in this area because of the difference in environment in which they were formed. The mobilization of bedded sulfides in response to regional metamorphism and magmatic intrusion led to the formation of vein sulfides. δ¹⁸O and δ¹³C of ore-bearing rocks and wall rocks are within the range typical of ordinary marine facies, with the exception of lower values for ore-bearing marble at Huogeqi probably due to diopsidization and tremalitization of carbonate rocks. Pb isotopic composition is relatively stable and characterized by lower radio-genetic lead. The age of basement rocks was calculated to be about 23.9 Ma and ore-forming age 7.8 Ma.²⁰⁷Pb/²⁰⁴Pb−²⁰⁶Pb/²⁰⁴Pb and²⁰⁸Pb/²⁰⁴Pb−²⁰⁶Pb/²⁰⁴Pb plots indicate that Pb may probably be derived from the lower crust or upper mantle. It is believed that the deposits in this region are related to submarine volcanic exhalation superimposed by later regional metamorphism and magmatic intrusion.     

The Mg Ⅱ absorption line systems in quasar spectra from the Large Sky Area Multi-Object Fiber Spectroscopic Telescope

Making use of quasar spectra from LAMOST,in the spectral data around the Mg Ⅱ emission lines,research described in this paper has detected 217 Mg Ⅱ narrow absorption lines(NALs) with W_r ~(λ2796)≥3σ_w and W_r~(λ2803)≥ 2σ_w in a redshift range of 0.4554≤z_(abs)≤2.1110.For quasars observed by both LAMOST and SDSS,we find that 135 Mg Ⅱ NALs were obviously observed in the LAMOST spectra,347 Mg Ⅱ NALs were were apparent in the SDSS spectra,and 132 Mg Ⅱ NALs were clearly present in both the SDSS and LAMOST spectra.The missed Mg Ⅱ NALs are likely ascribed to low signal-to-noise ratios of corresponding spectra.Among the Mg 11 NALs obviously observed in SDSS or LAMOST spectra,eight Mg 11 NALs were significantly changed with |ΔW_r ~(λ2796)|≥3σ_w in time intervals of ΔMJD/(1+z_(em))=359-2819 d.     

Mapping groundwater renewability using age data in the Baiyang alluvial fan,NW China

Hydrogeology Journal - Groundwater age has been used to map renewability of water resources within four groups: strong, partial, and rare renewability, and non-renewable. The Baiyang alluvial fan...     

北黄海盆地东部坳陷勘探突破对我国近海残留“黑色侏罗系”油气勘探的启示

最新的勘探和研究证实,北黄海盆地东部坳陷发育了中、上侏罗统2套有效烃源岩并以上侏罗统为主力烃源岩层,在其供烃范围内形成了上侏罗统-下白垩统"下生上储式"和中-上侏罗统"自生自储式"2类成藏组合,取得了我国东部海域以侏罗系为唯一源岩的含油气盆地勘探突破。为进一步探索我国近海盆地残留"黑色侏罗系"的资源潜力和勘探前景,本文采用地震-地质综合解释、烃源岩地球化学分析、盆地模拟等方法,综合分析了我国近海主要盆地残留"黑色侏罗系"的分布和地球化学特征。结果表明,我国近海残留侏罗系暗色泥岩烃源岩非均质性较强,多属"中等"级别,局部发育"中等-好"、"中等-差"级别烃源岩,侏罗系烃源岩大多存在早（J₃-K₁）、晚（E₂末-N₁）2期生、排烃高峰,生烃总量达1.4×10¹¹ t,资源前景乐观,预测可形成侏罗系"自生自储式"和侏罗系-白垩系（或新生界）"下生上储式"2类源储组合。     

Development of a hybrid simulation controller for full‐scale experimental investigation of seismic retrofits for soft‐story woodframe buildings

Hybrid simulations of a full‐scale soft‐story woodframe building specimen with various retrofits were carried out as part of the Network for Earthquake Engineering Simulation Research project – NEES‐Soft: seismic risk reduction for soft‐story woodframe buildings. The test structure in the hybrid simulation was a three‐story woodframe building that was divided into a numerical substructure of the first story with various retrofits and a full‐scale physical substructure of the upper two stories. Four long‐stroke actuators, two at the second floor and two at the roof diaphragm, were attached to the physical substructure to impose the simulated seismic responses including both translation and in‐plane rotation. Challenges associated with this first implementation of a full‐scale hybrid simulation on a woodframe building were identified. This paper presents the development and validation of a scalable and robust hybrid simulation controller for efficient test site deployment. The development consisted of three incremental validation phases ranging from small‐scale, mid‐scale, to full‐scale tests conducted at three laboratories. Experimental setup, procedure, and results of each phase of the controller development are discussed, demonstrating the effectiveness and efficiency of the incremental controller development approach for large‐scale hybrid simulation programs with complex test setup. Copyright © 2016 John Wiley & Sons, Ltd.