基于SLAF测序分析3个塔形马蹄螺群体的遗传结构和多样性*

塔形马蹄螺(Tectus pyramis), 海洋软体动物, 广泛分布于中国深圳大鹏湾、海南岛、西沙和南沙群岛的珊瑚礁生态系统中。文章采用特异性位点扩增片段简化基因组测序技术(SLAF-seq)对来自深圳(SZ)、三亚(SY)和西沙(XS)的塔形马蹄螺群体的遗传多样性和结构进行分析。通过测序共获得115.74Mb读长数据, 平均测序深度为337.87倍, 测序质量值(Q₃₀)平均为94.07%。研究获得118679个多态性SLAF标签, 获得846502个高度一致的群体单核苷酸多态性位点(SNPs), 其中有155个显著差异SNPs。3个群体的平均观察杂合度(H_o)和期望杂合度(H_e)值分别为0.1441~0.1611和0.2537~0.2695。平均多态性信息含量(PIC)为0.2048~0.2176。通过系统发育树分析、主成分分析和聚类分析, 将45个个体大致分为3个类群, 每个群体的所有个体都可以聚类成一个类群。SZ和SY群体的遗传结构相似, 遗传距离最低(0.2510), 遗传分化系数F_st值最低(0.0818)。但XS与其他两个群体间的遗传分化明显, 尤其是XS和SZ群体(F_st=0.1868)。3个群体的遗传分化可能与海流和地理位置有关。     

Effect of nano-MgO on mechanical performance of cement stabilized silty clay

Abstract

A series of direct shear tests were performed on cement-admixed silty clay to investigate the effect of cement content and nano-magnesia (MgO) on its shear strength properties. For each normal stress, shear strength increased with cement content. However, an obvious increment in shear strength was achieved when the cement content was adjusted from 13% to 17%. Both cohesion and friction angle of cemented soil increased with cement content, and exponential function was adopted to correlate both the factors with cement content. For cement content of 10% investigated in this study, the optimum nano-MgO content was 10‰, wherein the cohesion could reach the peak value. The microstructure of the mixture revealed that the structure of the mixture was compacted for the optimum nano-MgO content. However, micro-cracks were formed when the amount of nano-MgO exceeded its optimum content.     

Similarity measurement on human mobility data with spatially weighted structural similarity index (SpSSIM)

Understanding diverse characteristics of human mobility provides profound knowledge of urban dynamics and complexity. Human movements are recorded in a variety of data sources and each describes unique mobility characteristics. Revealing similarity and difference in mobility data sources facilitates grasping comprehensive human mobility patterns. This study introduces a new method to measure similarities on two origin–destination (OD) matrices by spatially extending an image‐assessment tool, the structural similarity index (SSIM). The new measurement, spatially weighted SSIM (SpSSIM), utilizes weight matrices to overcome the SSIM sensitivity issue due to the ordering of OD pairs by explicitly defining spatial adjacency. To evaluate SpSSIM, we compared performances between SSIM and SpSSIM with resampling the orders of OD pairs and conducted bootstrapping to test the statistical significance of SpSSIM. As a case study, we compared OD matrices generated from three data sources in San Diego County, CA: U.S. Census‐based Longitudinal Employer–Household Dynamics Origin–Destination employment statistics, Twitter, and Instagram. The case study demonstrated that SpSSIM was able to capture similarities of mobility patterns between datasets that varied by distance. Some regions showed local dissimilarity while the global index indicated they were similar. The results enhance the understanding of complex mobility patterns from various datasets, including social media.     

Experimental Study and Fatigue Analysis of Vortex-Induced Vibration of Umbilical Cable Considering Internal Friction

In order to investigate the effect of internal friction of umbilical cable on its vortex-induced vibration(VIV)responses, the experimental study on VIV of bond umbilical cable(BUC) and un-bond umbilical cable(UBUC) was carried out in an experimental tank. A current generator in the laboratory simulated the uniform current, and the current velocities were observed in real time by using a Doppler Velocimeter. In addition, different sizes of top tension were applied to the umbilical cable model. The VIV responses of the umbilical cable model were measured by using Fiber Bragg grating(FBG) strain sensors. The displacement responses of umbilical cable model were reconstructed based on the experimental strain data processed by modal superposition method. In this paper, the traveling wave characteristics, the spatial-temporal distribution characteristics of frequency and fatigue damage of the BUC and UBUC under VIV are studied. The experimental results show that there are obvious differences between BUC and UBUC in the response characteristics of VIV. The UBUC appears the traveling wave sooner than BUC, but its standing wave characteristics are more obvious than those of BUC at high velocities. Compared with BUC, the spatial-temporal distribution of UBUC frequencies appears wide-band distribution sooner, but has narrower bandwidth in the "lock-in" state. The level of fatigue damage of BUC was approximately the same as that of UBUC.     

铝土矿矿泥固化技术的试验研究

铝土矿选洗过程中排尾形成的高含水量矿泥,传统上采用建库堆存,泌干固结时间长,污染环境。试验研究结果表明,选用由72%水泥、20%石膏、5%石灰、3%硫酸钠组成的复合固化剂,或由72%石灰、20%石膏、5%粉煤灰、3%硫酸钠组成的复合固化剂,按固化剂与矿泥质量比1:10掺加,对矿泥进行固化处理,其固化体强度高、耐久性好,且成本低廉,具有广泛的工程应用价值。     

文学地理学视野下香港文化认同

通过文本分析和档案分析的方法,立足文学地理学分析框架和研究范式,分析了香港70年代、过渡时期、后殖民时期三部文学界热门且公认具代表性的作品——《我城》《烦恼娃娃的旅程》和《后殖民食物与爱情》,解构了作品中“本土”“国家”和“全球”3个空间维度下再现的地理物象、空间想象、人物活动、地方文化,窥探其内部隐含的文化认同与身份意识问题。结果发现,由于香港社会历史和文化背景不断变迁等原因,香港的文化和身份意识处于不断重塑的状态。通过文本分析,发现香港文学作品中最早萌芽的是“本土”意识。西西的《我城》被认为是本土意识的发轫之作,其在港英政府和回不去的家这一夹缝中在“城”这一空间尺度上勾勒出浓浓的地方意识。其次,在中国恢复行使香港主权这一背景下,《烦恼娃娃的旅程》这一极具回归题材代表性的作品深刻地刻画了香港人在身份认同尺度升级过程中的迷惘。最后,也斯的《后殖民食物与爱情》通过“食物”为线索讲述了回归后的香港故事,为读者认识后殖民时期多元文化混杂下的香港社会提供了细致的观察。通过对三部文学作品的分析,发现港人经历了由殖民统治时期本土身份意识的觉醒以及对中国文化的归属,到回归过渡阶段身份意识的尺度升级及其不适,再到回归后多元文化的交织和协商,不仅在尺度上实现了由地方到国家再到全球化的身份意识塑造,而且在结构上存在中华文化、西方文化和香港本土文化不断协商与冲突的三重性。更为重要的是,通过文学地理视角的讨论,发现这样的文化和身份意识不是属于某个群体的特有特征,而是根植于香港社会的每一寸肌肤,不仅反映了小说作者对香港社会的细致观察,在一定程度上也反映了社会本身所面临的文化和身份困扰。     

Evolution and driving forces of rural functions in urban agglomeration: A case study of the Chang-Zhu-Tan region

Journal of Geographical Sciences - As the Rural Revitalization Strategy is gradually implemented, China’s rural areas are set to have more diverse function requirements. This paper selects...     

基于多源遥感数据的区域生态系统服务价值年际动态监测 ——以中原城市群为例

通过对多源遥感数据在生态系统服务价值（ESV）遥感模型中的尺度效应分析,选择满足最佳空间分辨率和长时间序列的遥感数据,对中原城市群区域2001~2013年的ESV实现了逐年逐像元水平的动态监测。结果表明：该区应用于遥感模型输入数据的最适空间分辨率为30~1 000 m,相对于30 m尺度,其他尺度估算结果的相对偏差均小于0.4%;结合年际动态监测的需求,选择了MODIS数据产品（空间分辨率500 m,时间尺度1 a）作为遥感模型的最佳数据源;研究区ESV总值在研究期内整体上呈显著增长趋势,增速约为8.6亿元/a,但在持续增长过程中经历了3次波动,且表现得越来越剧烈;在空间上,研究区ESV多年均值呈现出明显的不均衡性,表现为从西南向东部递减的趋势。研究表明此方法简单易行,初步实现了区域ESV年际动态监测遥感模型的准业务化运行。     

检索词优化与空间自适应的深网POI获取方法研究

针对检索词库构建困难、数据请求量受限制等相关问题,该文提出一种基于独立覆盖率排序和空间自适应剖分的深网POI信息搜索方法,通过候选检索词初步构建、贪婪式探测搜索、检索词优化降维、空间自适应剖分爬行等主要流程,利用逐步逼近POI搜索的最大覆盖最优解,实现对深网POI信息的全量获取,大幅度提高深网POI数据的召回率与采集效率,该方法对于丰富地理信息资源、提升空间信息服务与内容管理能力具有重要意义。     

Improved Priority‐Flood method for depression filling by redundant calculation optimization in local micro‐relief areas

Depression filling is a critical step in distributed hydrological modeling using digital elevation models (DEMs). The traditional Priority‐Flood (PF) approach is widely used due to its relatively high efficiency when dealing with a small‐sized DEM. However, it seems inadequate and inefficient when dealing with large high‐resolution DEMs. In this work, we examined the relationship between the PF algorithm calculation process and the topographical characteristics of depressions, and found significant redundant calculations in the local micro‐relief areas in the conventional PF algorithm. As such calculations require more time when dealing with large DEMs, we thus propose a new variant of the PF algorithm, wherein redundant points and calculations are recognized and eliminated based on the local micro‐relief water‐flow characteristics of the depression‐filling process. In addition, depressions and flatlands were optimally processed by a quick queue to improve the efficiency of the process. The proposed method was applied and validated in eight case areas using the Shuttle Radar Topography Mission digital elevation model (SRTM‐DEM) with 1 arc‐second resolution. These selected areas have different data sizes. A comparative analysis among the proposed method, the Wang and Liu‐based PF, the improved Barnes‐based PF, the improved Zhou‐based PF, and the Planchon and Darboux (P&D) algorithms was conducted to evaluate the accuracy and efficiency of the proposed algorithm. The results showed that the proposed algorithm is 43.2% (maximum) faster than Wang and Liu's variant of the PF method, with an average of 31.8%. In addition, the proposed algorithm achieved similar performance to the improved Zhou‐based PF algorithm, though our algorithm has the advantage of being simpler. The optimal strategies using the proposed algorithm can be employed in various landforms with high efficiency. The proposed method can also achieve good depression filling, even with large amounts of DEM data.