复杂介质地震定位中震源轨迹的计算

交切法是最基本的地震定位方法之一.该方法利用震源轨迹进行定位,不需要求解方程,即使仅有少量的地震记录,利用交切法也能获得有价值的震中信息.但另一方面,交切法的定位精度较低,特别是震源深度的误差常常较大.     

Enhancing seismic P phase arrival picking based on wavelet denoising and kurtosis picker

P phase arrival picking of weak signals is still challenging in seismology. A wavelet denoising is proposed to enhance seismic P phase arrival picking, and the kurtosis picker is applied on the wavelet-denoised signal to identify P phase arrival. It has been called the WD-K picker. The WD-K picker, which is different from those traditional wavelet-based pickers on the basis of a single wavelet component or certain main wavelet components, takes full advantage of the reconstruction of main detail wavelet components and the approximate wavelet component. The proposed WD-K picker considers more wavelet components and presents a better P phase arrival feature. The WD-K picker has been evaluated on 500 micro-seismic signals recorded in the Chinese Yongshaba mine. The comparison between the WD-K pickings and manual pickings shows the good picking accuracy of the WD-K picker. Furthermore, the WD-K picking performance has been compared with the main detail wavelet component combining-based kurtosis (WDC-K) picker, the single wavelet component-based kurtosis (SW-K) picker, and certain main wavelet component-based maximum kurtosis (MMW-K) picker. The comparison has demonstrated that the WD-K picker has better picking accuracy than the other three-wavelet and kurtosis-based pickers, thus showing the enhanced ability of wavelet denoising.     

测震台站信息系统的设计与实现

基于台站信息管理的需要,设计了地震测震台站信息系统.使用该系统进行台站信息管理,便于保存、查询、修改,方便对相关信息的报送,并能相应减少工作人员的工作量,增加工作效率,在工作中有一定的使用价值.     

Earthquake response analyses of a full‐scale five‐story steel frame equipped with two types of dampers

The seismic performance tests of a full‐scale five‐story passively controlled steel building were conducted on the E‐Defense shaking table in Japan in March 2009. Before the tests, a blind prediction contest was held to allow researchers and practitioners from all over the world to construct analytical models and predict the dynamic responses of the steel frame specimen equipped with buckling‐restrained braces (BRBs) or viscous dampers (VDs). This paper presents the details of two refined prediction models made and results obtained before the tests. When the proposed analytical modeling techniques are adopted as in the two refined prediction models, the overall prediction accuracy is about 90%. Sensitivity studies conducted after the tests are also presented in this paper. The effects of varying each modeling feature on the response simulation accuracy have been investigated. The analytical results suggest that considering concrete full‐composite actions for beam members could improve prediction accuracy by about 20% against using the simplified bare steel beam model. Adopting refined BRB stiffness computed from incorporating finite‐element gusset stiffness only improves the overall prediction accuracy by 0.9%. Considering the BRB dynamic loading test results for analytical BRB strength reduces the error by 1.9%. For the VD frame, incorporating the brace and VD stiffness could improve the overall prediction accuracy by about 15%. Copyright © 2012 John Wiley & Sons, Ltd.     

Preliminary investigation of seismic damage to two steel space structures during the 2013 Lushan earthquake

Severe damage to steel space structures is rarely reported when compared to other structural systems damaged during past major earthquakes around the world.Two gymnasiums of steel space structures in downtown Lushan County that were damaged during the 2013 M7.0 Lushan earthquake in China were investigated and the observations are summarized in this paper.Typical damage to these two steel space structures ranges from moderate to severe.Moderate damage includes global buckling and dislocation of bolted connections of truss members,and inelastic elongation of anchor bolts and sliding of pedestal plates of supports.Severe damage includes member fracture caused by local buckling,and fracture failure of anchor bolts and welds.The distribution of structural damage to these two structures is described in detail and future research opportunities are suggested.     

应力扰动对地震周期和地震矩影响的数值模拟

利用二维有限元数值模型,结合断层滑移弱化摩擦准则对断层滑动规律以及应力扰动对其影响进行了研究．数值计算结果表明,在均匀应力分布情况下, 平面断层滑动显示出典型的特征地震规律,断层面上的应力扰动对断层滑动规律产生影响,压应力增加明显延迟地震的发生时间,并增加地震释放的能量．应力扰动发生在地震破裂临界区时的影响比在震前滑移区时的影响显著．当发生在地震滑移区时,若应力扰动足够大,则压应力增大会造成地震发生时部分动力断层被暂时锁住,使得地震释放的能量变小,但可增加后续地震的能量; 而压应力减小则可导致地震规律产生更加复杂的变化,会即时触发地震．如果应力扰动发生在一个地震周期的早期,则触发的地震较小,但可导致随后的地震提前发生; 如果应力扰动发生在一个地震周期的后期,则会触发大地震．当应力扰动位于震前滑移区或破裂临界区时,小的扰动也可能产生类似的效果．应力扰动产生越晚,这种影响也越明显．应力扰动发生在破裂临界区的影响最明显．应力扰动的影响一般主要集中在应力发生扰动后的1—2个地震周期内．后续地震基本恢复无应力扰动时的特征地震规律．      

青藏高原夏季的散射辐射

本文讨论了青藏高原夏季的散射辐射状况,着重分析了太阳高度角、大气透明度、拔海高度和云状、云量对散射辐射的影响,计算并分析了Berlage系数α和散射辐射日总量的变化特点。     

工业CT技术在卫星产品检测中的应用

卫星产品许多都采用了焊接结构。为了保证其使用的安全可靠性,必须对焊缝进行l00％的无损检测。然而对于一些形状复杂的精密电子束焊件,由于产品尺寸小,加之焊缝周围结构的遮挡,使常规方法的应用受到了限制。工业CT技术具有不受试件材料种类、形状结构及表面状况限制的特点,能给出与试件材料密度及尺寸特性相对应的断层扫描图象,分辨率高,在检测复杂构件方面显示出了优势。本文介绍了卫星产品精密复杂焊接件对无损检测技术的具体要求,研究了卫星产品电子束焊缝的工业CT检测方法,包括设备、对比试样、检测工艺、评定方法等,并通过电磁阀、喷注器、自锁阀、减压器、加注/排放阀、单向阀、气滤、过滤器等具体产品检测实例,描述了工业CT技术在卫星产品检测中的应用。实际应用表明：工业CT是检测航天卫星产品精密复杂结构件焊缝缺陷的理想手段,其成象直观,缺陷的定位、定性和定量结果可靠,完全能满足产品的质量控制要求。目前,累计用工业CT检测卫星产品数批若干件,检测焊缝上千条。剔出有超标缺陷的产品40件,避免了隐患。经过工业CT检测的产品,己在"返回式卫星"、"风云二号"、"东方红三号"、"资源一号"、"中星-22号"等型号卫星中取得了成功应用。     

地震仪器设备管理系统的设计与实现

利用Java语言,使用Microsoft SQL Server 2005数据库,利用MyEclipse工具研发地震仪器设备管理系统.使用该系统进行台站仪器设备信息管理,便于保存、查询、更新信息,实现数据资料的完整、准确、长期保存,工作效率增加.     

Levee failure mechanisms during the extreme rainfall event: a case study in Southern Taiwan

Extreme weather has recently caused many disasters worldwide. In August 8, 2009, Southern Taiwan suffered from serious floods during Typhoon Morakot. In this extreme rainfall event, the Chiuliao first levee in the Laonong River basin experienced catastrophic failure. Therefore, this study focuses on the levee failure mechanisms based on variations in levee water levels. Specifically, this study investigates four mechanisms based on limit state equilibrium. The first mechanism involves the slope stability under hydrostatic conditions at various water levels. The results of this analysis show that the levee cannot fail under this mechanism. The second mechanism involves the levee slope stability with steady-state seepage. Because the water levels are different on the protected and flood sides, the water recedes much faster on the flood side than the protected side. Based on this analysis, the levee slope might fail when the water level at the protected side is close to the top of levee and the water level at the flood side starts to recede. The third and fourth mechanisms involve the levee foundation failure in terms of sliding and overturning failure. The results of this study indicate that the levee foundation is more prone to sliding failure than overturning failure. Based on these results, this study shows that the levee failed when the water level at the protected side neared the top of levee while the water level at flood side started to recede. At this moment, the levee may fail because of both the slope failure with seepage and sliding failure of the levee foundation.