Application of Weights of Evidence to Mineral Potential Mapping of Yujiacun Ore Field in Northwest Yunnan Province, China

The multivariate information conprehensive processing technique is especially important at present to the digital mineral prospecting. However, the GIS-based weights of evidence have provided us with powerful tool for the quantitative assessment of mineral resource potential. In this paper, the mineralization model is established, based on the achievements made by previous researchers, to mend such deficiencies ad few references on ore fields in Yujiacun, Yunnan Province and the shortage of quantitative prediction and assessment of mineral resources. In addition, the weights of evidence are used to make a systematic quantitative prediction and assessment of mineral resources there, so that 2 mineral prospecting target areas of grade Ⅰ and 8 mineral prospecting target areas of grade Ⅱ are delineated, providing the further mineral resource exploration with the basis for the selection of mineral deposits.     

水稻低温冷害遥感监测技术与方法进展

根据国内外水稻低温冷害遥感监测和遥感灾损评估研究进展情况，分析了水稻低温冷害遥感监测的可行性和各种方法的优缺点，提出了低温冷害遥感监测方面需要开展的相关研究领域和需要解决的几个问题。     

湖南省2001年夏秋季对流云降水潜力数值模拟结果

应用对流云数值模式模拟了2001年7～9月湖南省三个探空站0000和1200(世界时)462个对流云降水算例.模拟结果表明(1)其中53天的198个算例属于有利人工增雨的天气形势,133个算例的可播度大于零,54个算例的增雨率大于零;(2)7～9月天气形势有利于人工增雨日的算例,对流云平均含水量为575万吨,平均降水效率11.4%;(3)8月降水潜力大于7月,9月降水潜力最小.这表明即使大旱的2001年湖南省夏秋季对流云仍然有一定的增雨潜力.     

长白山天池火山区长白-敦化剖面结晶基底的探测和研究

时间项分析法中，应用广义最小二乘法进行反演，对长白山天池火山区岩浆系统的长白—敦化(L1)剖面的Pg波到时进行了计算处理，得到了Pg波时间项及基底速度值；取上部地壳的介质平均速度为4．5km/s，经反演求得了各点的深度值，给出了长白山天池火山区结晶基底的厚度分布。结晶基底厚度一般在2．0km左右，而在长白山天池下方结晶基底最厚处接近4．0km；在万宝和敦化附近各有一不太明显的凹陷，其原因可能与在这两个位置处有几条断裂穿过有关。     

地震视应力用于震后趋势快速判定的可能性

对多次强震的地震视应力进行了计算，将各次强震的地震视应力的高低与强震发生后的后续地震的强度进行联系，探索它们之间的关系，进而提出将地震视应力用于强震震后趋势预测的可能性。对多次强震的地震视应力与其后续地震强度的关系的分析结果表明，低视应力的强震的后续地震的强度一般较低，即低视应力的强震发生后，震区发生较强的后续地震的可能性较小。     

ADP数字地震前兆综合观测台网系统的设计

介绍了ADP数字地震前兆综合观测台网系统的功能与结构。ADP系统已在广东省地震局连续运行，满足前兆台网综合化、数字化、自动网络化的要求。     

ADAPT数字遥测地震台网中传递函数的辨识

Adapt系统可以利用脉冲标定波形得到系统的传递函数，它将复杂的传递函数计算过程简化了，用户可以将传递函数的测定作为一种日常工作来做。     

鄂豫皖交界地区地震地质背景与中强地震复发特征的研究

鄂豫皖交界地区位于东大别山西部，历史中强地震(M≥43/4)主要发生在土地岭-落儿岭及商城-麻城断裂带上，且“互动”和“连动”的特征较为显著。根据这一特征，在研究东大别山区域地质、地壳结构、断裂活动及地震构造应力场特征的基础上，可将鄂豫皖交界地区的中强地震作为秦岭-大别山活动地块中的次级地块的整体活动来看待。该区历史地震活动整体表现为丛集特征，而主要发震断层(土地岭-落儿岭断裂)的历史地震活动则具有相对较好的准周期性。地震复发周期研究提示，该地块近期发生M≥5．0左右地震的危险性较大，而霍山-六安地区为未来发生中强地震的主要危险区。     

Modelling of the OASIS Energy Flux Measurements Using Two Canopy Concepts

Two land surface schemes, SCAM and CSIRO9, were used to model the measured energy fluxes during the OASIS (Observations At Several Interacting Scales) field program. The measurements were taken at six sites along a 100 km rainfall gradient. Two types of simulations were conducted: (1) offline simulations forced with measured atmospheric input data at each of the six sites, and (2) regional simulations with the two land surface schemes coupled to the regional climate model DARLAM.The two land surface schemes employ two different canopy modelling concepts: in SCAM the vegetation is conceptually above the ground surface, while CSIRO9 employs the more commonly used `horizontally tiled' approach in which the vegetation cover is modelled by conceptually placing it beside bare ground. Both schemes utilize the same below-ground components (soil hydrological and thermal models) to reduce the comparison to canopy processes only. However, the ground heat flux, soil evaporation and evapotranspiration are parameterised by the two canopy treatments somewhat differently.Both canopy concepts reproduce the measured energy fluxes. SCAM has a slightly higher root-mean standard error in the model-measurement comparison for the ground heat flux. The mean surface radiative temperature simulated by SCAM is approximately 1K lower than in the CSIRO9 simulations. However, the soil and vegetation temperatures (which contribute to the radiative temperature) varied more in the CSIRO9 simulations. These larger variations are due to the absence of a representation of the aerodynamic interactions between vegetation and ground.     

变形体的稳定性及其定量分析方法初探

变形体的稳定性是变形体性质的重要内容，它是工程实际中极为关注的问题，但从变形监测的角度上来分析变形的稳定性目前在国内外还未见任何实质性的报导。本文讨论了从变形监测角度上分析变形体稳定性的一般方法，进行变形稳定性的分类，初步研究了变形体稳定性的定量分析方法，定义了一系列量化指标，如稳定度、因素的影响域与因素的稳定域等。这些有利于把稳定性分析推向应用和深入，从而提高变形监测在变形体定性分析中的地位，增