Bond rolling resistance and its effect on yielding of bonded granulates by DEM analyses

A discrete element modelling of bonded granulates and investigation on the bond effect on their behaviour are very important to geomechanics. This paper presents a two‐dimensional (2‐D) discrete element theory for bonded granulates with bond rolling resistance and provides a numerical investigation into the effect of bond rolling resistance on the yielding of bonded granulates. The model consists of mechanical contact models and equations governing the motion of bonded particles. The key point of the theory is that the assumption in the original bond contact model previously proposed by the authors (55th CSCE‐ASCE Conference, Hamilton, Ont., Canada, 2002; 313–320; J. Eng. Mech. (ASCE) 2005; 131 (11):1209–1213) that bonded particles are in contact at discrete points, is here replaced by a more reliable assumption that bonded particles are in contact over a width. By making the idealization that the bond contact width is continuously distributed with the normal/tangential basic elements (BE) (each BE is composed of spring, dashpot, bond, slider or divider), we establish a bond rolling contact model together with bond normal/tangential contact models, and also relate the governing equations to local equilibrium. Only one physical parameter β needs to be introduced in the theory in comparison to the original bond discrete element model. The model has been implemented into a 2‐D distinct element method code, NS2D. Using the NS2D, a total of 86 1‐D, constant stress ratio, and biaxial compressions tests have been carried out on the bonded granular samples of different densities, bonding strengths and rolling resistances. The numerical results show that: (i) the new theory predicts a larger internal friction angle, a larger yielding stress, more brittle behaviour and larger final broken contact ratio than the original bond model; (ii) the yielding stress increases nonlinearly with the increasing value of β, and (iii) the first‐yield curve (initiation of bond breakage), which define a zone of none bond breakage and which shape and size are affected by the material density, is amplified by the bond rolling resistance in analogous to that predicted by the original bond model. Copyright © 2006 John Wiley & Sons, Ltd.     

Effect of spatial variation characteristics on contouring of design storm depth

The ordinary kriging method, a geostatistical interpolation technique, was applied for developing contour maps of design storm depth in northern Taiwan using intensity–duration–frequency (IDF) data. Results of variogram modelling on design storm depths indicate that the design storms can be categorized into two distinct storm types: (i) storms of short duration and high spatial variation and (ii) storms of long duration and less spatial variation. For storms of the first category, the influence range of rainfall depth decreases when the recurrence interval increases, owing to the increasing degree of their spatial independence. However, for storms of the second category, the influence range of rainfall depth does not change significantly and has an average of approximately 72 km. For very extreme events, such as events of short duration and long recurrence interval, we do not recommend usage of the established design storm contours, because most of the interstation distances exceed the influence ranges. Our study concludes that the influence range of the design storm depth is dependent on the design duration and recurrence interval and is a key factor in developing design storm contours. Copyright © 2003 John Wiley & Sons, Ltd.     

On the microwave millisecond spike emission and its associated phenomena during the impulsive phase of large solar flare

We propose a model of two acceleration regions, which can explain, on the basis of microwave maser caused by a “hollow-beam” distribution of electrons, the presence of millisecond spikes in the event of 1981 May 16 and their absence in the event of 1981 October 12, and the enhanced continuous emission in the latter. We have also uncovered relations among the features, e.g. the Type III_G, Type IV_DCIM and hard x-ray bursts, that accompany the microwave millisecond spikes during the impulsive phase of a large flare.     

海洋走航式单边连续观测地震折射波Δt解释方法--1种新的浅层折射单支时距曲线解释方法

在浅层工程折射地震测量中 ,通常采用相遇观测系统采集数据和相应的解释方法进行解释 ;对于单边观测采集方法由于与其相应的解释方法较少而少被采用。本文提出 1种方法简单、精度可靠、可直接利用同一点相邻 2排列 2次观测的初至折射时间并适合于海洋走航式单边连续观测系统的折射初至资料解释方法。其精度基本与同观测段的采用相遇观测的差异时距方法解释的精度十分接近。该方法即适合于人工解释又适合于计算机自动解释。     

雪宝顶碱性花岗岩岩石地球化学与成矿控制

对雪宝顶碱性花岗岩具有高丰度的W、Sn、Be含量和W、Sn矿化花岗岩的微量元素组合特征进行了分析，结果显示：稀土元素具有∑REE含量与LREE／HREE比值偏低和负Eu异常的特点；元素比值K／Rb，U／Th，Nb／Ta的规律性变化以及矿脉产状特征等表明W-(Sn)-Be脉状矿床形成于岩浆演化晚期，与岩浆期后的热液活动有关。     

一种腐屑食性鱼类对生态系统氮循环的影响

研究表明 :腐屑食性鱼类——梭鱼对环境中有机氮的摄入能力随体重的增加而增加 ,随温度的升高 ,体重系数显著减少。摄入氮 (CN,mg/ d)与体重 (W,g)和温度 (T,℃ )的数值关系可用如下模型表示 :CN=0 .6 370 W1 .0 642 ln(3.70 0 8T)。体重为 1 0 0 g的梭鱼每日可消耗环境中 332 mg氮有机质。梭鱼氮的吸收效率主要受温度的影响 ,而氮的转化效率与体重呈显著的正相关关系。随体重的增加 ,排泄氮所占比例降低     

准噶尔盆地中部III 区块原油中25-降藿烷分布特征与成因意义

通过对准噶尔盆地中部Ш区块原油或油砂抽提物的饱和烃气相色谱-质谱分析,研究了原油或油砂抽提物中25-降藿烷的分布规律.结果表明,不同井区或同一口井不同深度(层位)的原油25-降藿烷的相对含量存在比较明显的差别,表明其所遭受的生物降解程度有所差异,沿构造带从南到北,同一油层中原油的生物降解程度增强,比如位于构造北部(构造部位相对较高)的永1井、永3井侏罗系原油25-降藿烷丰度较高,表明生物降解比较明显,而位于南部(构造低部位)的永6井白垩系和侏罗系油层中的原油均无明显的生物降解现象;同一口井随深度增大生物降解作用将弱,如永2井浅部白垩系油层的原油降解较严重,而深部西山窑组的原油降解作用则不明显.根据原油生物降解的特征,结合车-莫古隆起调整对研究区油气成藏的影响,讨论了原油生物降解差异分布的成因机制.     

自拟通窍祛瘀汤治疗外伤性气滞血瘀型脑内血肿51例

目的：观察自拟通窍祛瘀汤治疗外伤性气滞血瘀型脑内血肿的临床疗效。方法：选取外伤性气滞血瘀型脑内血肿患者100例,将其随机分为治疗组（51例）和对照组（49例）。2组均予以基础治疗,对照组在基础治疗上加用西医常规治疗,治疗组在对照组基础上加用自拟通窍祛瘀汤口服治疗。治疗2周后观察2组中医证候疗效,治疗前、治疗1周后、治疗2周后观察2组血肿吸收、水肿吸收、神经功能缺失（NIHSS）评分、中医证候积分情况。结果：总有效率治疗组为94.11%（48/51）,明显高于对照组的75.51%（37/49）,2组比较,差异有统计学意义（P＜0.05）。治疗后2组血肿体积、水肿体积、NIHSS评分、中医证候积分均较治疗前减少,且治疗组与对照组治疗后同时间节点比较,差异均有统计学意义（P＜0.05或P＜0.01)。结论：外伤性气滞血瘀型脑内血肿患者在常规治疗的基础上使用自拟通窍祛瘀汤治疗可以促进神经功能恢复,改善中医证候,促进血肿和水肿吸收。     

Experimental research on reservoir sensitivity to stress and impacts on productivity in Kela 2 Gas Field

Kela 2 Gas Field, with high formation pressure (74.35MPa), high pressure coefficient (2.022) and difficulty of potential test and evaluation, is the largest integrated proved dry gas reservoir in China so far and the principal source for West-East Gas Development Project. In order to correctly evaluate the elastic-plastic deformation of rocks caused by the pressure decline during production, some researches, as the experiment on reservoir sensitivity to stress of gas filed with abnormal high pressure, are made. By testing the rock mechanic properties, porosities and permeabilities at different temperature and pressure of 342 core samples from 5 wells in this area, the variations of petro-physical properties at changing pressure are analyzed, and the applicable inspection relationship is concluded. The average productivity curve with the reservoir sensitivity to stress is plotted on the basis of the research, integrated with the field-wide productivity equation. The knowledge lays a foundation for the gas well productivity evaluation in the field and the gas field development plan, and provides effective techniques and measures for basic research on the development of similar gas fields.     

TRMM卫星微波成像仪分级产品及其反演降水算法

文章叙述了获取定量降水信息的意义，简要介绍了对热带测雨卫星TRMM(Tropical Rainfall Measurement Mission)的仪器、美国国家宇航局提供的微波成像仪TMI(TRMM Microwave Imager)分级产品。对比了物理方法和经验方法反演降水的特点，并对一些经验方法以及倾斜对流系统对反演降水的影响、动态聚类分析、神经网络反演方法的研究成果进行了介绍。