行星天文学的重要地位及其热点

对1995年至2001年《Natue》和《Science》上发表的天文学论文的统计表明，行星天文学领域的论文数量明显超过天文学的其它分支学科，占天文学总论文数的1/3左右。从这个角度来看，行星天文学是天文学最活跃和重要的分支学科之一。对这些论文具体内容的分析可以给出当前行星天文学领域的若干热点问题。相比之下，我国对这一重要领域的关注和投入还远远不够。     

Calibration of the kinematic method of studying solar wind disturbances on the basis of a one-dimensional MHD solution and a simulation study of the heliosphere disturbances between 22 november and 6 december 1977

An empirical kinematic method developed by Hakamada and Akasofu (1982) is calibrated on the basis of a one-dimensional MHD solution. The calibrated results are used to simulate the stream-stream interaction and the background corotating structure in a simple situation and also during 22 November–6 December 1977. The solar wind disturbances caused by solar activities during this period are then introduced into the above background stream in simulating the heliospheric disturbance event which was observed by an aligned set of spacecraft at distances between 0.6 and 1.6 a.u. The observations and the simulated results are satisfactory, and a little more refinement in the simulation could reconstruct reasonably well the data by filling the data gaps in the solar wind speed, the density and the IMF magnitude.     

基于PowerBuilder的信息系统的权限控制

针对信息系统安全的考虑,介绍在PowerBuilder环境中对用户权限的具体控制.     

浙西北江山─绍兴断裂带构造演化特征

江山—绍兴断裂带是中国南方最重要的构造带之一。它是江南陆块与华夏陆块神功运动形成的碰撞拼贴带。它表现出明显的多期变形、构造叠加的特征：神功运动形成近东西向平卧褶皱；印支运动沿断裂带有向北西强烈的推覆挤压。断裂带不同时期的活动反映了不同特征的构造环境，形成不同的构造变形特征，并对两侧的地质历史具有明显的控制作用。     

阿吾拉勒山西段二叠纪火山岩组合与构造环境分析

阿吾拉勒山体西段发育了厚度巨大的下二叠统火山岩,这些火山岩均属碱性玄武岩系列,以钾质类型为主,钠质类型次之,岩浆演化呈现出跨越B型趋势。这种火山活动是在大陆地壳内部产生的,代表了陆内裂谷演化的早期阶段。在早二叠世末期,由于受到新源运动的影响,这种火山活动被终止了。     

云南天文台基本天体测量工作的发展

介绍了云南天文台天体测量工作的发展过程，论述了在空间时代地面光学基本天体测量的必要性和应具备的条件，并且叙述了在新的要求和条件下，地面光学基本天体测量工作应该发挥的作用和广阔的发展前景。     

Isotopic evidence for holocene climatic changes in Bosten Lake, Southern Xinjiang, China

Based on the δ¹³C and δ¹⁸O fluctuation of lacustrine carbonate, CaCO₃ content and sporo-pollen data, a palaeoclimatic history of Bosten Lake during the Holocene has been outlined, several stages of climatic changes are divided, and the following result es are obtained: (1) Palaeoclimatic changes revealed by carbonate isotope around Bosten Lake are basically identical with that revealed by other geological records in Xinjiang. Environmental changes presented apparent Westlies Style model: during cold period, relative humidity increased, δ¹⁸O, δ¹³C and CaCO₃ appeared low; but in warm periods, the dry regime aggravated. (2) The temperature reflected by δ¹⁸O exist evident features being increase in the late period during the Holocene. Together with the δ¹³C, pollen and CaCO₃ analyses, several cold and warm phases which are of broad regional significance can be identified. The warm peaks occurred at about 11.0 ka B.P., 9.4 ka B.P., 7.5 ka B.P., 5.0 ka B.P., 3.0 ka B.P. and 2.0 ka B.P.; the cold peaks at 11.5 ka B.P., 10.5 ka B.P., 8.8 ka B.P., 5.5 ka B.P., 3.3 ka B.P., 2.2 ka B.P. and 1.5 ka B.P.. (3) Several climatic events with the nature of “abrupt climatic changes” are revealed in the periods of 11.0 ka B.P. −10.5 ka B.P., 9.4 ka B.P. −8.8 ka B.P., 5.5 ka B.P. −5.0 ka B.P. and 2.0 ka B.P. −1.5 ka B.P.. (4) The results show that carbonate isotopic record of lacustrine sediment in arid area is very sensitive to climatic changes, and may be play a very important role in understanding the features and mechanism of palaeoclimatic changes.     

Sources of ore-forming fluids and metallic materials in the Jinwozi lode gold deposit,eastern Tianshan Mountains of China

This paper presents gas compositions and H-, O-isotope compositions of sulfide- and quartz-hosted fluid inclusions, and S-, Pb-isotope compositions of sulfide separates collected from the principal Stage 2 ores in Veins 3 and 210 of the Jinwozi lode gold deposit, eastern Tianshan Mountains of China. Fluid inclusions trapped in quartz and sphalerite are dominantly primary. H-and O-isotopic compositions of pyrite-hosted fluid inclusions indicate two major contributions to the ore-forming fluid that include the degassed magma and the meteoric-derived but rock ¹⁸O-buffered groundwater. However, H- and O-isotopic compositions of quartz-hosted fluid inclusions essentially suggest the presence of groundwater. Sulfide-hosted fluid inclusions show considerably higher abundances of gaseous species CO₂, N₂, H₂S, etc. than quartz-hosted ones. The linear trends among inclusion gaseous species reflect the mixing tendency between the gas-rich magmatic fluid and the groundwater. The relative enrichment of gaseous species in sulfide-hosted fluid inclusions, coupled with the banded ore structure indicating alternate precipitation of quartz with sulfide minerals, suggests that the magmatic fluid has been inputted to the ore-forming fluid in pulsation. Sulfur and lead isotope compositions of pyrite and galena separates indicate an essential magma derivation for sulfur but the multiple sources for metallic materials from the mantle to the bulk crust.

     

Relict mountain slope deposits of northern Portugal: facies,sedimentogenesis and environmental implications

This paper deals with the formation processes and the palaeoenvironmental significance of relict slope deposits located on the uppermost part of the north Portugal mountains. For this purpose, seven key sites representative of the different lithofacies have been selected and analysed in detail. The data show that three main dynamic processes are responsible for the emplacement of regional fossil slope deposits: runoff, debris flows and dry grain flows. The ubiquity of these processes and the lack of frost‐related features or landforms do not support the existence of severe Pleistocene climates in this part of the lberian Peninsula as postulated by previous work. Pedological data gathered at one of the study sites show that a subalpine environment was probably present at 700–800 m altitude between 29 and 14 kyr. Using data from the Pyrenees Mountains, a 6.5 to 12°C depression in mean annual temperature has been tentatively postulated for this Pleniglacial period. Copyright © 2003 John Wiley & Sons, Ltd.     

Bond rolling resistance and its effect on yielding of bonded granulates by DEM analyses

A discrete element modelling of bonded granulates and investigation on the bond effect on their behaviour are very important to geomechanics. This paper presents a two‐dimensional (2‐D) discrete element theory for bonded granulates with bond rolling resistance and provides a numerical investigation into the effect of bond rolling resistance on the yielding of bonded granulates. The model consists of mechanical contact models and equations governing the motion of bonded particles. The key point of the theory is that the assumption in the original bond contact model previously proposed by the authors (55th CSCE‐ASCE Conference, Hamilton, Ont., Canada, 2002; 313–320; J. Eng. Mech. (ASCE) 2005; 131 (11):1209–1213) that bonded particles are in contact at discrete points, is here replaced by a more reliable assumption that bonded particles are in contact over a width. By making the idealization that the bond contact width is continuously distributed with the normal/tangential basic elements (BE) (each BE is composed of spring, dashpot, bond, slider or divider), we establish a bond rolling contact model together with bond normal/tangential contact models, and also relate the governing equations to local equilibrium. Only one physical parameter β needs to be introduced in the theory in comparison to the original bond discrete element model. The model has been implemented into a 2‐D distinct element method code, NS2D. Using the NS2D, a total of 86 1‐D, constant stress ratio, and biaxial compressions tests have been carried out on the bonded granular samples of different densities, bonding strengths and rolling resistances. The numerical results show that: (i) the new theory predicts a larger internal friction angle, a larger yielding stress, more brittle behaviour and larger final broken contact ratio than the original bond model; (ii) the yielding stress increases nonlinearly with the increasing value of β, and (iii) the first‐yield curve (initiation of bond breakage), which define a zone of none bond breakage and which shape and size are affected by the material density, is amplified by the bond rolling resistance in analogous to that predicted by the original bond model. Copyright © 2006 John Wiley & Sons, Ltd.